Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.

If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.

Warranty and responsibility

A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.

Half the battle is Apple repair- this is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts for current models, so that you do not have to waste extra time.

Free diagnostics

This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.

Service repairs and delivery

Good service We value your time, which is why we offer free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: correctly and according to technology can only be done in a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Company age and experience

Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
They trust us and convey complex cases other service centers.

How many masters in areas

If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.

To as soon as possible and with a minimum payment get an effective, professional repair with original components and a 1-year warranty, immediately contact our Apple service center. Only here with the help of highly qualified, experienced repairmen iPad screen 4, 3, 2, Air, Air 2, mini 2, 3, Pro will definitely be successful, besides, positive result is always confirmed by the issuance of a one-year warranty card. To change the screen on iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro, our responsible employees use exclusively original analogues, parts brought directly to the warehouse from the manufacturer's factory. Thus, we reduce the cost of goods (there are no significant markups from intermediaries) and maintain quality at the highest level (no one makes the necessary spare parts better than the manufacturer).

Important: Promotion! Reduced price by 50% marked with the word “Promotion”, valid until the end of this month 1. As a spare part for an iPad from a copy; 2. We install original spare parts and provide a 1-year warranty! 3. 20-50% discount at the request of regular customers - see special 4. When repairing, choose free									Price installation details in our service center:
Name of spare parts	iPad 4, 3, 2	iPad Air	iPad Air 2	iPad mini 1.2	iPad mini 3	iPad mini 4	iPad Pro 9.7	iPad Pro 12.9	Price installations in rub.	Repair time without pressure testing (with pressure testing + 4 hours)
Touch glass (original)	1980 Promotion! Promotion until Sunday	2990 Promotion! Promotion until Sunday	3900 Promotion! Promotion until Sunday	2790 Promotion! Promotion until Sunday	2950 Promotion! Promotion until Sunday	4900 Promotion! Promotion until Sunday	5900 Promotion! Promotion until Sunday	6900 Promotion! Promotion until Sunday	600	40 minutes
Display (original)	2890 Promotion!	3450 Promotion!	7900	2840 Promotion!	3400 Promotion!	8900	11900	12900	600	40 minutes
Touch glass (copy)	790	1190	1190	1390	1390				600	40 minutes
Home button (body part)	980	980	980	980	980	980	980	980	600	40 minutes
Home button (inner part: cable with components)	860	860	860	860	860	860	860	860	600	40 minutes
Volume button cable, power button	970	970	970	970	970	970	970	970	600	1 hour
Headphone cable	860	860	860	860	860	860	860	860	600	1 hour
SIM card cable	880	880	880	880	880	880	880	880	600	2 hours
Speaker	1280	1280	1280	1280	1280	1280	1280	1280	600	2 hours
Microphone	1190	1190	1190	1190	1190	1190	1190	1190	600	2 hours
Antenna	260	260	260	260	260	260	260	260	600	2 hours
Battery Promotion!	1980	1980	1980	1980	1980	1980	1980	1980	600	3 hours
Large iPad camera	860	990	990	990	990	990	990	990	600	40 minutes
Camera small iPad	790	990	990	990	990	990	990	990	600	40 minutes
Power connector with cable	1300	1300	1300	1300	1300	1300	1300	1300	600	40 minutes
Power connector	1280	1280	1280	1280	1280	1280	1280	1280	600	40 minutes
WiFi antenna	800	800	800	800	800	800	800	800	600	40 minutes
Wi-Fi module	1500	1500	1500	1500	1500	1500	1500	1500	600	from 2 hours
Power management chips	2290	2390	2390	2390	2390	2390	2390	2390	600	from 2 hours
Pad	800	800	800	800	800	800	800	800	600	40 minutes
Back cover (case) Promotion!	2985	2985	2985	2985	2985	2985	2985	2985	1200	from 2 hours
Sim reader	890	890	890	890	890	890	890	890	600	2 hours

Become our regular customer and get a discount on our special.
Service center services
Installation of modules and components: display, speaker, case repair, etc.				from 100-900 rub., from 20-50 minutes
Installation of radio elements: capacitor, diode, transistor, varistor, etc.				from 50-900 rub., from 1 hour
Restoring the printed circuit board (without replacing radio elements)				from 200-800 rub., from 1 hour
Installation of microcircuits, controllers, etc.				from 600 rub., from 1 hour
Recovery after moisture ingress				from 900 rub., from 1 hour
Firmware				900 rub., 40 minutes.
Diagnostics and troubleshooting are free!

Repair prices:

We hasten to announce good news: prices for iPad screen repairs have been reduced to a minimum, they are even equal to factory prices (that is, the cost of goods). Review the prices yourself in the price list and make sure that we are telling the truth. Even software and Maintenance iPad products 4, 3, 2, Air, Air 2, mini 2, 3, Pro are offered at affordable rates, and rescue operations are carried out in a matter of minutes, very quickly.

How to repair an iPad display

To properly repair the iPad display, bring the faulty device to the Gsmmoscow service center, which is located at the address written in the section contact information. You can also call a courier to your home and entrust the delivery of broken equipment to him.

When the gadget in question is in the hands of our specialists, they will immediately begin their immediate responsibilities, that is:

You need urgent replacement iPad touch glass?

Professional craftsmen offer urgent iPad repair 4, 3, 2, Air, Air 2, mini 2, 3, Pro which will last no more than half an hour. At such an accelerated pace, you can safely change screens, speakers, glass. We remind you that you will not have to pay extra for the proposed efficiency, that is, the price does not change depending on the timing of gadget repair.

It happens that your iPad tablet Pro stopped turning on, the touch screen does not work or the screen is broken. In this case, you will need to replace the display ipad pro on new. Of course, you can take the device to the nearest service center, but it is much easier and more economical to replace it yourself by purchasing a screen module.

The causes of iPad Pro display breakdowns can be:

• mechanical shocks;
• moisture penetration;
• placing heavy objects on top;
• failure of the microcircuit (mainly due to power surges during charging);
• problems with the cable or printed circuit board;
• manufacturing defects.

Preparatory activities

Warm up the thermal bag in the oven or microwave - the heating time should not exceed 30 seconds. When removing the thermal bag, try to grasp it by the edges. If you see that it is too swollen, do not touch it as you may get burned. In general, the thermal bag retains its heat for 10 minutes. While disassembling the device, you may need to warm up the device several times.

If your glass is cracked, it is recommended to seal it with tape. The entire screen is glued to prevent splinter damage during disassembly. In addition, such protection will ensure correct opening of the tablet. It is recommended to wear glasses just in case.

What tool should I prepare?

To replace the display you will need:

• 6 picks for opening;
• sucker;
• spudger;
• thermal bag for heating glue or hair dryer;
• screwdriver.

Before starting work, be sure to turn off the tablet. You should purchase a replacement part - a display assembly.

Replacing the ipad pro display: a detailed guide to action

1. in ipad pro different places there are adhesive strips. The following photo shows where the thickest layer of glue is. Knowing these places, you will need to vary the depth of penetration of the mediator.
2. Place a thermal bag on the left edge of the iPad. Wait a few minutes for the glue to soften. If you don't have a thermal bag, you can use warm air from a hairdryer.
3. Place the suction cup near the left edge of the tablet, exactly in the middle.
4. Hold the corners of the iPad and gently pull up a few times. Such manipulation is performed in order to weaken the tightness of the gadget.

Once you see a small gap, insert a spudger or pick into it. The sharp part of the tool should not penetrate further than 2mm, otherwise you risk damaging your tablet.

1. Place the thermal bag along the lower left corner. After the glue has softened, insert a spudger near the pick and run it along the bottom left edge. Remember, do not push the tool too deep. You may need additional heating of this part of the device.
2. Insert the pick at the bottom left edge (closer to the corner), removing the spudger.
3. Warm up the top corner of the iPad, touching the front camera. Once the glue has softened, insert the paddle above the pick on the left corner and remove any excess glue by working your way up to the corner.
4. Remove the spudger and insert the triangular plate as shown.
5. Now your task is to completely warm up the top of the iPad Pro. Insert the spatula into short distance and move towards the front camera. Once you reach it, stop.
6. Immediately before front camera replace the spudger with a pick.
7. Warm up the top using the thermal bag again. After a few minutes, insert the spatula behind the front camera and move it to the upper right corner. After removing the glue, replace the tool with a plastic plate.
8. To soften the glue once again right side place the thermal bag on the device. Walk the spudger to the middle of the iPad (stop in front of the front camera). Replace the instrument with another mediator.
9. Go a little lower and insert the spatula between the display and the back of the case. Swipe it down along the right edge, going down to the corner.
10. Once again, replace the instrument with a mediator. The location of the plastic is the lower right corner.
11. Using a thermal bag, soften the glue connecting the parts of the iPad from below. Insert the spatula again and run it from the right corner to the center of the end. You need to stop at a distance of 1 cm from the Home button. If you do not do this and continue to walk with the tool, you may damage the cables. Remove your spudger and use a plastic triangle.
12. Turn the thinnest edge of the spatula and go directly under the button.
13. Having overcome the “Home” button, you can again drive the paddle deep, clearing to the left end of the lower edge (the pick is already installed there).
14. Look at the diagram from step 1. Make sure that the areas with the thickest glue strips have been successfully cleared. Otherwise, you will have to carry out additional cleaning of the glue using a thermal bag.

This iPad model has very short cables. Do not rotate the display around the bottom edge. The cables can also become unusable if the screen is raised 80 degrees.

You need to lift the display 60-70 degrees to access its individual parts.

1. You need to remove the battery as a short circuit may occur. To do this, you need to unscrew 9 screws (eight 1.2 mm and one 2.4 mm). Keep the display open and ensure that the display cables do not become kinked during operation.
2. Raise the metal shield protecting motherboard. It will take some effort to remove the plate. It may become slightly deformed during removal.
3. Unscrew the 1.8 screw covering the battery connector using a screwdriver.
4. Insert a battery lock or any other tool into the motherboard and leave it there for isolation purposes until the repair is completed.
5. Remove the 3 screws above the display cable bracket (2.4mm and 1.2mm). Remove the metal plate.
6. Remove the two cables from their sockets on the motherboard.
7. Now you can remove the display. Be sure to remove all remaining adhesive and install new adhesive strips.
8. Replace the screen.
9. Reassemble in reverse order.

Display module– one of the most unprotected parts of the tablet. Yes, there is glass. Alas, taking into account the considerable weight compared to smartphones, a fall from a small height onto a hard surface is enough and the device will fail. In the best case, you will simply need to replace the iPad display cable, in the worst case, a number of other, more complex and expensive works. Contact the highly qualified professionals working with us, they will restore correct performance quickly!

Everyone knows why a display module can fail - such as a fall on a hard surface. Since the device is quite heavy, compared to the same smartphones, the likelihood of damage is much higher. Especially with such a large screen area.

Similar consequences in the form of a non-functioning display can be obtained if moisture gets inside the case. In any case, if the picture is not displayed correctly and you cannot fully use the tablet, you should contact one of our workshops for high-quality iPad display repair at a low price.

RemFOX Service Center

The display module is one of the weakest points in modern tablets. Unfortunately, even high-quality equipment assembled at Foxconn factories is subject to the possibility of breakdown for a variety of reasons: mechanical damage, water ingress, natural wear and tear, and manufacturing defects. If you need to replace your iPad screen, we recommend contacting certified specialists working in our RemFOX service centers.

Don't trust? Please pay attention to the many reviews left by satisfied clients of the workshop. Wondering how much it costs to repair an iPad screen? Call by phone and ask the manager. You can also arrange for a professional to travel to any convenient place: at work, home or in a cafe where you are used to having lunch.

Among other things, we note high confidentiality. Our masters do not distribute other people's information and do not interfere with it. There is absolutely nothing to worry about, be sure to come and we will confirm everything in action!

WiFi