The hard drive of a normally operating computer device is always formatted in the NTFS or FAT file system. If one of the HDD partitions begins to work incorrectly, an entry appears in the disk properties about converting its format to RAW. This means that the standard file system is damaged and needs to be restored. In practice, you can find out about such damage as follows. When accessing the disk, it does not open, and a message appears on the monitor indicating that it needs to be formatted.

What does this message mean:

• The structure of the file system being used is destroyed.
• Can't access content hard drive.
• Writing incorrect or damaged data to the boot sector of the disk.

When opening the properties of the hard drive, you will notice that the partition supposedly does not contain any information. In any case, it is necessary to restore the file system to return the data on the disk.

What could cause a crash?

The reasons for such a failure may be:

• Impact from a virus that has entered the computer.
• Critical failure operating system.
• An incorrectly working program that replaces the original system files with its own files. This also includes “crooked” drivers.
• User errors when shutting down the computer. This is how the file system on flash media is often damaged.
• External factors that can cause damage to the file system. In particular, frequent power outages can trigger a similar problem.

How can I restore the file system and information on my hard drive?

Even though the operating system will prompt you to format the damaged partition, it is better not to agree to such actions. However, if you were in a hurry and gave the formatting command, all is not lost. However, in this case, it will be much more difficult to completely restore the contents of this section. First, you should restore all the information available on the faulty partition, and then restore the file system itself.

It is recommended to restore data and functionality of a logical partition using the RS Partition Recovery program.

This program allows you to:

• Recover files from a HDD on which the file system has been changed. That is, with RAW.
• Recover data from a hard drive that you formatted.
• Obtaining the most complete information from a logical partition that was deleted.
• Complete recovery of damaged partitions.
• Copying data from damaged partitions to other media.
• The program copes well with the assigned tasks on any medium.

Working with RS Partition Recovery

The program interface is quite simple. The main menu is divided into three main parts. On the left you can see a list hard drives and logical partitions. In the center, the disks are filled with information, as well as data on the sizes of all disks. The files we selected appear in the right column. The program even displays hidden files, as well as partitions managed by other operating systems.

It's time to move on to direct data recovery using this wonderful program. To do this, just click on the upper left button, designated “Wizard”. The wizard's work menu will open in front of the user. The selected disk will be analyzed.

The program divides all partitions into three categories: logical, removable and hard drives. To restore data, you must select the appropriate partition. Enter it and then click “Next”. You will be prompted to select an analysis type.

The choice consists of two options:

• Quick scan.
• Full analysis.

• 1 filter will detect NTFS system files. Most internal partitions operate in this space.
• 2 filter will process files belonging to the FAT system. This formatting is more typical for removable media, but such files can also be found on a computer’s hard drive. Linux OS also works with the FAT system.
• Deep analysis works regardless of the file system. During its operation, the program simply finds on the disk all the files that were once there or are currently there. However, it is not advisable to use in-depth analysis alone, since some information may be lost. It is best to analyze a section using all three filters.

When choosing quick scan, some files simply will not be found. Only intact files will be found, without any signs of damage.

After completing the analysis, the program will tell you how many folders and separate files found in this section.

To view all files found during analysis, you need to go to the main menu of the program by clicking the “Finish” button.

In the center of the program window you will see a folder called “Deep Analysis”. Double clicking on it will open the contents of the folder. In order to restore selected files, you need to select them in this folder, and then top panel click the “Restore” button. In this case it will be proposed next choice places to save them:

• On hard drive.
• To removable media.
• Mounting the image.
• Uploading to the Internet via FTP protocol.

In this window, you should select the location to save the files, the option to restore the structure of deleted folders, as well as restore file streams to NTFS. After this, click the “Restore” button. All found files will be restored to the location you specified.

recoverit.ru

How to return NTFS from RAW file system without data loss?

What is the RAW file system and how to return the NTFS format without data loss - in this article we will look at these issues in detail, as well as recovery methods.

It often happens that after an incorrect shutdown of your computer, for example, if you unplug the cord from the socket or the power in your house is suddenly turned off, or your computer has experienced a virus attack, an unpleasant situation may occur. File system The disk on your computer or laptop changes its format to RAW and for the device to work properly (as a rule, you want to do this as quickly as possible), you need to return it to the NTFS format.

What is a RAW disc?

So, the RAW file system type, let's figure out what it is. The RAW system is a non-existent system. If the computer indicates that the storage medium has this format, then the drivers cannot determine the type of its file system (FAT, FAT32 OR NTFS).

If the media is in RAW format, Windows 10 will display it among the hard drive partitions, but any actions with it will be impossible, such as defragmentation, checking for errors, and, of course, viewing the data on the disk. The computer will constantly give an error and prompt you to format the disk, and “RAW” will appear in the “logical disk properties” line. So how do you restore a file system from RAW to NTFS format on a hard drive?

Restoring a file system from RAW to NTFS

The system will offer you the easiest way - to format the disk. But don’t rush to do this, because your data is not lost, now there is simply no access to it. If you format a RAW disk to convert the file system back to NTFS, you will have to spend a long time recovering data from the media using special programs. We offer several ways to restore a disk from RAW to NTFS without losing data.

Restoring a file system to NTFS from RAW without formatting

Method 1: Windows Tools

Mainly, to change the file system from RAW to NTFS, the standard utility from the operating system chkdsk helps. Follow these steps:

• Right click "Start" and select "command prompt"
• Type the command chkdsk drive_letter: /f
• The computer will begin a scan, after which it will repair the damage and the NTFS system in the problem area

Chkdsk will also help if it is damaged system disk. For this you will need a flash drive or boot disk.

Here are your steps:

• Start your computer from a flash drive or disk, and then select “Recovery”
• Then open “advanced options”, and then “command prompt”. There, enter chkdsk drive_letter: /f

When restoring, the partition letters may differ from the disk names. In order to prevent errors in operation, open the list of computer partitions in the command line, then enter diskpart, then list volume and you will see which disk is the system one. This will be indicated in the list.

In addition, you can try to restore the system from previously saved backup copies.

Method 2: Using special programs

Here's how to make NTFS from a RAW file system using third-party programs.

First of all, we recommend using free program Testdisk. This is a utility that interacts with hard disk partitions. She will help correct the situation. The disadvantage of working with the Testdisk program is that it does not work with Russian names and they may not be displayed correctly.

Here's how to convert RAW to NTFS using Testdisk:

RAW format on your flash drive

Reasons for conversion:

1. When the flash drive is connected, the computer is turned off incorrectly or there is a voltage drop
2. Crash Windows operation
3. Banal viruses
4. External damage to the flash drive, from impact or fall

How to change the wrong system format to the correct one:

Good result gives converter MiniTool Power Data Recovery. The principle of its operation is that the program does not convert RAW to required format, but makes all the files on your flash drive visible, which makes working with them possible. The disadvantage of the program is that only the trial version is free, which works with files no larger than 1 GB.

How to use the program:

Also on our website you can familiarize yourself with the following topics:

• Merging hard drive partitions on Windows 10
• How to change hard drive partitions
• How to change the page file in Windows 10

windows10x.ru

Recovering the HDD file system while saving all data

The problem with the appearance of the RAW file system can affect not only removable media, but also a hard drive with data or a separate hard drive partition. If the malfunction is of a software nature, then it can be corrected using formatting. However, changing the format using standard Windows tools is fraught with the appearance of deleted data.

If the file system of your hard drive is detected as RAW, and the system persistently asks you to format it, then it is better to abandon this procedure. Disconnect the hard drive and do not perform any further operations on it to avoid accidental overwriting.

Important: if the hard drive is physically damaged, you should not try to restore it yourself.

If upon inspection you find that the hard drive is physically intact, then first try restoring the file system using the CHKDSK utility. This will help avoid the subsequent time-consuming recovery of deleted files.

Using the CHKDSK utility

The CHKDSK utility is a built-in hard drive diagnostic and recovery tool. The problem is that if the file system is damaged, then you will not be able to start the system. Therefore, you will have to run the CHKDSK utility using the installation disk:

The parameter in the command syntax means to start searching and fixing errors. The letter “d:” indicates the drive that will be scanned. If the operation will take place successfully, errors will be detected and eliminated, then you will again have a working disk with a normal file system and without deleted important data.

Extracting files using R-Studio

If the TestDisk program did not help you get rid of the RAW format, and you did not return the NTFS or FAT32 file system, then you will have to go another way. You will need:

• Another computer with a scratch disk and installed system.
• R-Studio program.

Remove the HDD with the RAW file system and connect it to another computer. To avoid the appearance of deleted files, run the R-Studio program. Here you need:

You need to save the files to a different drive than the one from which they were just extracted. The hard drive format will not change - it will remain RAW. To restore the HDD, format it as suggested by the system. The format will change, but there will no longer be problems with deleted files, since you previously “pulled them out” from the damaged media.

Formatting to NTFS

If you need to format your hard drive to the NTFS file system without losing information, you can try doing this via command line. This will not solve the problem with the RAW format; This method cannot be used to change to FAT32. But if you need to change the disk or partition format from FAT32 to NTFS, then try the following steps:

Enter the command “convert G: /FS:NTFS /X”. Instead of “G” there should be the letter of the hard drive you connected, the partition format of which you want to change from FAT32 to NTFS. Running this command will help you avoid data loss i.e. deleted files there is no need to restore, since formatting is not required.

easyrecover.ru

How to restore a hard drive file system

Photos from open sources

A situation in which a hard drive requires recovery can happen to every PC user. It may be needed for various reasons. One of them is file system corruption.

If the disk is used for its intended purpose, it has a FAT or NTFS file system. These formats indicate that it works well and does not require restoration. But sometimes it turns into RAW. How can you understand that a failure has occurred? If you access the disk, but it does not open and a message appears about the need to format it, then a failure has occurred.

This message may mean the following:

1. The structure of the file system used was destroyed;
2. There is no clear access to the content;
3. Invalid data was written to the boot sector.

If you open the properties section, you can see that it seems to contain no information. But you will still need to restore the file system to get back your lost data. It is offered free of charge. It makes it possible to return lost data to a state that is close to ideal. Let's say our hard drive has several partitions. For example, partition D turned out to be damaged. We select the damaged partition in the program, then indicate the type of structure that we have. In our example, this is the Intel/PC partition. Select the Analyze item. An analysis will be carried out and a list of partitions for recovery will be provided. Select the Quick search option. She, in turn, will select all files from the partitions. Once you find what you need, click the Write button. After all the actions performed, the lost information will be restored. Its interface is quite simple. The main menu has 3 parts. On the left is a list of hard drives and logical partitions. The center shows their data load. The files selected by the user are displayed on the right.

1. To start the recovery, you must click “Wizard”. After this, the operation menu will appear. The hard drive will be analyzed.
2. In the program, all partitions are divided into 3 categories: hard, removable and logical drives. In order to start data recovery, you will need to select required section. After that, click "Next". You will be asked to select the type of analysis: operational scanning or full analysis.
3. It is better to immediately conduct a full analysis. It processes 3 filters at once. The first filter will calculate NTFS systems. The second one will process files that belong to this system. Deep analysis will work regardless of the file system.
4. If you choose the first option, then some of the files simply cannot be found. In this case, files may be found that do not show signs of damage.
5. After this you can start scanning. The larger the volume of the disk being checked, the longer the process will be.
6. After the analysis is completed, you will find out how many folders are in this section.
7. In order to familiarize yourself with all the files found during the analysis, you need to go to the main menu and click “Finish”.
8. The “Deep Analysis” folder will appear in the center of the window. Next, you will need to select them in this folder, and then click “Restore”. All that remains is to choose a place to save them.
9. In this window, you will need to select the location to save the data, the option to restore the folder structure that was deleted, and restore file streams to NTFS. After this, you will need to click the “Restore” button.

The main thing for the day

In Dagestan, unknown persons fired at police officers. On Monday, August 28, unknown persons fired at police officers in the Dagestan city of Kaspiysk. As a result of the attack, one employee was killed, RIA Novosti reports, citing a source in the republic’s law enforcement agencies. "Unknown persons committed an armed... NATO Secretary General: The European Union cannot cope without the alliance The European Union is dependent and cannot cope without NATO from a security point of view. This was stated by Alliance Secretary General Jens Stoltenberg. The secretary's interview was published on Monday by the Rzeczpospolita newspaper. Regarding the general...

News aggregator 24SMI

Joke of the day

At the age of 7, my father took me to a school for gifted children. To show what kind of son he wanted.

More "

planet-today.ru

RAW format of HDD disks: how to fix it in NTFS using Windows tools or third-party software

Most often, the disk file system changes to RAW after the computer was turned off incorrectly, when the lights were turned off, or the user saved time and pulled out the power cord system unit from the socket. Another reason is viruses that change the NTFS to RAW format of HDD drives. How to fix this problem, read this article.

What is the RAW file system?

If the disk is in RAW format, Windows will display it among other hard drive partitions. But when you try to open it, the computer will give you an error and ask you to format it. In addition, any actions with this volume will be unavailable: error checking, defragmentation, etc. (it is useful to read “How to check the integrity of system Windows files 10 and restore them?").

There is no RAW file system as such. If the disk receives this formatting, it means that the computer drivers are not able to determine the type of its file system - NTFS, FAT or FAT32. In practice, this happens in several cases:

• the file system structure is damaged;
• The partition has not been formatted;
• there is no correct access to the contents of the volume.

If volume is damaged with the OS, when the computer boots, warnings “Reboot and select proper boot device” or “Operating System” will appear not found».

Recovery

If the problem occurs on a non-system drive, but it contains important information that will be lost when formatted, use standard Windows tools or third party programs to correct the error.

Basically, the standard chkdsk utility helps fix problems with formatting in RAW.

After checking, the computer will repair damaged sectors and the NTFS file system on the problematic volume.

Important! This method is effective if the flash drive or hard drive has been formatted in NTFS.

The chkdsk utility will also help when the system disk is damaged. But for this you will need a boot disk or flash drive.

1. Start your computer with bootable flash drive or disk → Select “System Restore”.
2. Additional options→ command line → enter chkdsk drive_letter: /f.

In the recovery environment, the partition letters are different from the names of the logical drives. To avoid mistakes, open the list of computer partitions in the command line.

Enter diskpart → list volume → the list will indicate which disk is the system one.

Good to know! If these methods do not help, try restoring your system from previously saved backups.

There are third-party programs that help restore the NTFS file system if for some reason it was reformatted to RAW. They do not damage the user’s information stored on the volume, unlike the chkdsk utility, which can “affect” them during the recovery process.

MiniTool Power Data Recovery

Important! This method is most effective if the RAW file system appears on a flash drive.

The utility does not restore the required format, but makes all files stored on the media visible. Therefore, you can work with them. The main disadvantage of MiniTool Power Data Recovery is that it is shareware. trial version works with files whose size does not exceed 1 GB (also read “Recovering information on disks using Disk Drill for Windows”).

TestDisk

This is a multifunctional free utility that works with hard drive partitions using a large number of options. The program is presented in a portable version, so it does not require installation. The main disadvantage of TestDisk is that it does not have a Russified interface.

Alternative way Restoring an NTFS formatted partition is presented in the video.

A person is faced with changing the disk file system format to RAW, usually due to the fact that the computer was completed incorrectly. You see, there are quite a few such cases - either the light goes out, or you are in a hurry and automatically pull out the power cord from the socket. But it’s just that everything didn’t happen to me “like other people.” I borrowed a flash drive from a friend and wanted to transfer the video to myself, but there were so many viruses on this drive that I still have to clean it up. Among them, by the way, were those that change the NTFS to RAW format of HDD drives. However, I managed to solve this problem relatively quickly. So if an unwanted format has appeared and you want to eliminate it, then read on.

A little theory about what kind of system this is - RAW?

If the disk has changed its format to RAW, Windows will display it among other partitions of the hard drive. But when you try to open it, the computer will indicate an error and a window will appear asking you to format it. What’s also unpleasant is that all actions with this volume will become impossible, including checking for errors, defragmenting and many others.

The whole problem is that the RAW file system does not exist in nature. In principle. At all. If a message appears stating that the disk has received such formatting, this will indicate that the computer driver cannot determine the type of its file system - NTFS, FAT or FAT32. This may happen under the following circumstances:

• The file system structure has been damaged;
• The partition was not formatted;
• There is no correct access to the contents of the volume.

It is important to note that if the volume with the OS is damaged, then when the computer boots, a window will pop up - a warning “Reboot and select proper boot device” or “Operating System not found”.

The raw format of hdd disks has appeared. How to fix it?

How is this kind of situation resolved?

In my case, I should have used only standard Windows tools since the failure was on a non-system drive that stored large number important information. Formatting was excluded in any case. Yes, to be honest, I would like to reinstall the system in general, but only because of several documents that I forgot to copy to the “cloud”, I had to “play” with all this.

What Windows tools should I use to resolve this issue?

First of all, to fix problems with formatting in RAW, you should use the standard chkdsk utility. Below is a clear, step-by-step algorithm:

1. Click RMB on the Start menu, and then click Command Prompt (admin).
2. You should enter: chkdsk drive_letter: /f.

After the check is completed, the computer will restore bad sectors and the NTFS file system on the affected volume. Again, this technique only works if the flash drive or hard drive was in NTFS.

In addition, using the chkdsk utility would be advisable if the system disk is damaged. However, in this situation you will need a boot disk or flash drive. Next, you will need to perform a strict sequence of actions:

1. Start the PC from a bootable flash drive or disk, after which you need to click the “System Restore” item.
2. Enter - additional parameters - command line - chkdsk drive_letter: /f.

In the recovery environment, partition letters are not the same as logical drive names. In order to avoid the error, just open the list of computer partitions in the command line.

In order to find out which disk is the system one, you need to enter diskpart - list volume - and the information you need will be indicated in the list.

The flash drive has become raw. How to restore?

In this case, the way out of the problem situation is carried out with the help of a third party software

The software used to restore an NTFS file system that was previously reformatted to RAW does not affect the user’s information located on the volume. This is the advantage this method from using the chkdsk utility.

MiniTool Power Data Recovery

This program is good for everyone, but there is just one small drawback - it costs money. It's very easy to use.

1. You need to activate the LostPartition recovery software, click on the desired drive. Full Scan displays the files located on the flash drive.
2. It is necessary to designate the files to be saved. To do this, click on the “Save” button, then point to the desired location for saving and confirm the process.
3. After copying and checking all the files you have selected is completed, you will need to format the damaged volume.

Alternative to MiniTool Power Data Recovery - TestDisk

This program has a number of significant advantages over the previous one. TestDisk is a multifunctional, and most importantly, free utility that uses a large number of options when working with hard drive partitions. Moreover, there is a portable version of TestDisk, so there is no need to install it. However, there is also a drawback that negates all the advantages. This program does not have a Russified interface, so you will have to use GoogleTranslite. Or hire a translator. You should work with TestDisk like this:

1. Activating the testdisk_win.exe file and then selecting “create”. Then you need to press enter, select the desired disk and enter again.
2. Next, you will need to click the “Write” item in order to save the section structure.
3. If the measures taken are ineffective, you must use the “DeeperSearch” command, and then go through everything again.

Conclusion

The problem at hand is not that complicated - there are many options for solving it. But it’s still better to use only proven flash drives and scan them for viruses before use. Indeed, in addition to these, there may be a huge number of other viruses that have much more adverse effects.

As you know, if the structure of the file system of a logical disk is damaged in any way, the operating system and all programs that are accustomed to a clear and harmonious structuring begin to experience difficulties in determining the type of file system of the damaged partitions. In such cases, a meaningful entry appears in the “logical disk properties” line: RAW. Here are just a few possible reasons for its occurrence: hardware failure, software failure, virus invasion.

For one reason or another, incorrect values ​​for a logical disk appear in the partition table (for example, MBR), and damage occurs in boot sector system or in the MFT (master file table in an NTFS system) area. You can try to correct minor errors in system data; if things are really bad, you can at least restore the necessary files.

Fix bugs? Maybe!

At its core, RAW is not a separate file system type. Your disk was and remains formatted in FAT or NTFS. However, it will no longer be possible to work with it according to the standard scheme - the disk simply will not open or will require formatting. And if you intend to save as much information as possible stored on a broken disk (yes, it hasn’t disappeared anywhere yet!), we strongly do not recommend agreeing with the latter. It may not be possible to return the “FAT” or “NTFS” entry to the disk properties. But it’s easy to recover all the necessary information from it!

So, first, let's find out whether our file system is actually RAW. We check the “properties” of the disk using context menu in the “My Computer” tab. If the "type" line says " local disk", and in the line "file system" - "RAW", it’s time to start the data recovery process. By the way, for this it is better to choose a proven and effective recovery program. If your data is really important to you, it is better not to be seduced by dubious offers with promises of all kinds of “bonuses”.

Second life of the system...

RS Partition Recovery is a reliable tool for recovering data from inaccessible, formatted, broken disks. In most cases, the program is capable of recovering partition data even after severe damage, reconstructing a logical drive, and resuming system operation literally from scratch!

Even if you managed to format a disk with a damaged structure, it is possible to save your data! The “deep analysis” function used by RS Partition Recovery will scan and analyze all fragments of data saved on the disk, and based on them, it will recreate the partition structure and return the disappeared files in a form completely suitable for further use.

How to do this?

A smart program can bypass the blocking of access to the partition structure, which is activated after the system is converted to RAW. Moreover, if you did not have time to format the disk, recovery will be really quick and painless. If the goal is to get your data back after formatting, just be patient. The results of RS Partition Recovery are worth it!

Just download and install the program (on any disk or other media except the one being restored), start scanning the required disks. In a new program window you will see all files available for recovery. Save them - also on any disk other than the one being restored.

The “Preview” functions and sorting files according to various parameters will make working with recovered information faster and more convenient. Use a competent program - and forever forget about all the unpleasant emotions associated with the word “RAW”!

Today, sometimes there are situations when a user turns on a laptop or computer, and instead of some logical partition, a disk with an incomprehensible RAW format is displayed. Let's try to find out what it is.

Also in this review we will look at the simplest methods of conversion of this format back to normal.

What is RAW format?

When it comes to format of this type, then you need to clearly understand that in the usual sense it’s not even a format. RAW is a modified file system type. When trying to access such a partition, two types of problems may arise. Firstly, the volume may not appear at all in file manager. Secondly, even if the volume is visible, there are no files in it, so the system will offer immediate formatting, since the file system is not compatible with the OS. How to correct the situation in this case? You need to choose the right approach. Formatting a partition and destroying all displayed information will not lead to anything good. Why might formats change? HDDs?

Reasons for changing the disk format

Before proceeding to solve the problem itself, it is necessary to clarify the possible reasons changes to the section structure. Experts believe that the RAW format of hard drives may appear as a result of the influence of certain viruses that purposefully change the file system. This can happen if there is a sudden power outage while performing any operations that require direct access to the partition. After this, in some cases the disk may be visible even with the files and folders on it. But perform operations to change the volume label, format it using standard means or change the size becomes impossible. This happens because the file system changes. Fatal errors appear in the partition table. However, there are several universal solutions that can fix the problem associated with the RAW format of hard drives. Next, we will look in detail at how to correct the situation.

RAW format: correction technique

Next, we will look at the main aspects that relate to correcting the situation associated with the RAW format. As has probably already become clear to you, HDD recovery As the main task, it uses a solution that allows you to bring the partition’s file system into a form that would be perceived by the operating system, namely NTFS or FAT32. It is worth noting that in most cases, even rolling back the system to a previous state will not bring the desired result, so you should not do this. It will be a waste of time. First, you can try to make folders and files appear. In some cases, they can be copied to another location, for example, to removable media. How can you make files visible? In this case, RAW format processing is carried out using a rather interesting utility called Mini Tool Power Data Recovery. This program belongs to the class of shareware software. After installation, the application must run a module called Lost Partition Recovery. In it you need to select the desired partition and click Full Scan. This will run a full scan. When the process is complete, the program window will display a list of all available files. All you have to do is mark the required data, and then click on the Save button. The application will automatically prompt you to select the location where you would like to save the files. Specify it and start the process. After completing this operation, you can safely begin formatting the partition. If this procedure turns out to be unavailable, you can immediately move on to the next step.

System recovery

Now let's look at how you can convert RAW to NTFS using only the operating system's own tools Windows systems. First of all, you need to launch the command line using the Win+R key combination. It is worth noting that hard drive recovery can only be performed in this way. Standard partition check in Windows environment will not bring results. Now it all comes down to writing the following command on the command line: chkdsk “drive letter”. Then you just need to press enter. All that remains is to wait for the process to complete, during which the file system will be restored. Then you need to reboot. It is worth noting that this method is perfect for those file systems that previously had an NTFS structure. system drives. However, when using this technique, you will need to boot your laptop or computer terminal from a recovery or boot disk.

How to fix a disk format using the TestDisk utility

Let's look at another way to fix the problem associated with the RAW format of hard drives. The TestDisk utility for restoring the original format is best suited for this purpose. Main advantage this application is that it does not require installation. The program is released as a portable version. The main disadvantage of the utility is that it does not have a Russified interface and works in DOS mode. So let's get started restoration of hard disk. First of all, at the first stage of working with the program, you need to select the Create item, which is responsible for creating a new log file. Then you should press the enter key. After this, use the arrows to select the desired partition or disk. As a result, the application will automatically detect the partition table type. You can change it manually, but this is not recommended. Next, you need to use the analysis line “Analyse”, and after that a quick search – “Quick Search”. After completing each action, you must press the Enter key. When the lost partition is found, you will need to use the Save Structure or Write option. If the desired section is not displayed in the list of search results, you need to use deep scanning. After this, it is necessary to perform all the operations just described to preserve the structure. After this, you will need to restart your laptop or computer. As a result, the problem should disappear.

Application of Ontrack Easy Recovery

Let's look at another program with which you can convert the RAW format of hard drives. This is very easy to do with Ontrack Easy Recovery. The application works similarly to the TestDisk program. However, most users this program It is attractive because it has a convenient and beautiful interface. It is worth noting that many experts believe this software product an indispensable tool for recovering large disk partitions. The only drawback of this program is that it is paid. However, for our person this is not a problem. After all, on the Internet you can always find key generators, activation keys and patches.

Conclusion

What's the result? In this review, we looked at ways to change the RAW format of hard drives. It should already be clear to you how you can fix the RAW format to readable format. As for the choice of method, it must be based on each specific situation. Let's assume that if formatting is possible on your own, then you can display the files and simply copy them to another location. You can also try to restore the partition to its original state using the scan command, which is a built-in operating system tool. However, if the volume is large, this process can take quite a long time. On the other hand, to simplify these steps, you can use third-party utilities. Some of these utilities were discussed above. Some users may not like the DOS interface of the TestDisk program. If you do not like this method, you can use a similar application, Ontrack Easy Recovery, which has a full-fledged graphical shell. Many may argue that this method requires certain costs, but here everyone decides for himself what is more important to him: information or money...

A disc that, for certain reasons, acquires RAW status is far from a new thing in the world. modern technologies and, fortunately, we have a solution to this issue. Don’t prematurely panic with the thought, “My USB drive is broken, on which I have an important presentation prepared for speaking at a corporate meeting.” There is a solution to the problem and it is very simple. You can not only restore important information from your disk, but also to revive it without any losses.

Step-1. Recovering data from media with the RAW file system

First of all, you need to recover all the valuable data on the storage device. To do this quickly and efficiently, use the instructions below.

1. Connect your RAW device to your PC.
Run the recovery program Starus Partition Recovery, point the program to the drive to scan and perform analysis.

2. The application will scan to find deleted materials. If you need more information, please swipe Full analysis.

3. You will see a list of all folders and files in them that are or have been present on the device since the last formatting. You can preview, find the information you need and, if there are several files, select it, then press the key Restore and export data in a format convenient for you.

Useful articles

After exporting the data, you can move on to step number two, which will help format the device from RAW to NTFS or FAT32.

Step-2. Convert RAW file system to NTFS and FAT32

The main way to format a drive by changing the file system is a utility built into the operating system. Use the instructions below to format the disk.

Method one. We use the Disk Management menu.

1. Right click on the shortcut My computer or through the menu Start. Next, press the key Control.

2. Now select menu Disk management. In the list that appears, you need to find the RAW device and right-click on it. Everything is fine on our PC, but if yours has the problem in question, then in the column File system it will be written RAW.

2. In the drop-down window, select Format, reset the name, restore the NTFS file system and click OK to confirm the operation.

Be sure to wait for the formatting process to complete without interrupting it or disconnecting your computer from the network.

Method two. Restoring RAW to NTFS/FAT32 using the command line.

Command Prompt, being a built-in Windows tool, helps operating system users solve many issues related to their PCs. One of the problems that it can fix is ​​the RAW file system. System, not readable Windows, and therefore it must be returned to the original format - NTFS or FAT32.

Wait for the process to complete and close the Command Prompt. Your disk is now usable again.

Additional information to help you protect your drives from RAW.
If your device is healthy, fully functioning and you want to format it, then a sudden power outage may lead to an error in creating logical partitions, which in turn will change the NTFS/FAT32 system to RAW. By avoiding the situations described above, the chance of logical failures occurring is minimized.

Settings