After replacing the glass on the iPad. iPad glass replacement cost. Why is glass replacement necessary?

Most often, glass replacement on an iPad 2 is required and performed in the following situations:

  • cracks appeared;
  • small and deep scratches spoil appearance and presentability of the mobile device;
  • a glass module broken due to careless handling or impact has become a serious obstacle to using the iPad for its intended purpose;
  • the glass surface is damaged or stained (for example, with paint).

Replacing glass on an iPad 2 is a delicate job, so it should be carried out only in professional centers, by craftsmen who have experience in such work and appropriate certification. Contacting us is your guarantee of the quality of the work performed and the confidence that original spare parts with guarantee. .

How quickly can you replace the glass on an iPad 2?

Our clients often ask how long they will have to wait if they trust us to repair their branded tablets. If for competitors it depends on the busyness of the foreman and the urgency of the work, we work on a different principle. Having quickly selected the appropriate size glass from our warehouse, our specialist will remove the damaged old one from the device and carefully install the new one. Please note that we never use used parts for replacement.

If at the client's request it is carried out urgent replacement glass on iPad 2, the price in Moscow may vary significantly. In our service center there are no markups for urgency. After a visual inspection of your iPad, our specialist will be able to answer your question about how long you should expect to receive a repaired device. On average, this takes up to 20-30 minutes, which you can spend in our cozy relaxation area for guests.

We offer our customers to quickly change the glass on their iPad 2, while the price remains fixed and the quality is always at the highest level. Along with responsibility and professionalism, efficiency is one of our main advantages, since we value your busyness. By entrusting your equipment to us, you will spend a minimum of money and time

How much does it cost to change the glass on an iPad 2 in Moscow?

ay:Service 24 is transparent pricing for the benefit of our clients. The price consists of two main components: the cost of the part and the work of our craftsman. In addition, during diagnostics, a specialist from our service center may discover additional faults, for example, a cable that has failed and requires replacement. This will affect the final cost of our services.

By using only high-quality parts, we ensure that iPad 2 glass replacement is cheap and much better value than most of our competitors. We can afford to offer you affordable prices through wholesale purchases of parts from suppliers and reasonable organization of the work process. In addition, as our regular customer, you can count on pleasant bonuses and attractive discounts.

If you need to replace the glass on your iPad 2, the price will be calculated taking into account the cost of parts in effect at the time of promotion and your personal discounts. You can contact our manager right now, who will make a preliminary calculation based on the current price list of spare parts available in our warehouse.

Why can't you change the glass on your iPad 2 yourself?

This is a rather complex procedure that requires not only special knowledge and experience, but also professional equipment. Since iPads are quite expensive tablet models, we recommend that you do not experiment, since the stingy always pays twice. Turn to our service professionals, because this is the only way you can count on quality repairs.

If you try to replace the glass on your iPad 2 yourself, you risk breaking or hopelessly damaging the cable connected to the module, and then the cost of repairs will be even more expensive. Without knowing the internal structure of the tablet and the features of its disassembly for repair work, do not take this responsibility upon yourself. No custom video instruction on the Internet can replace professional skills.

Another common mistake in order to save money is when the glass on an iPad 2 is replaced at home, the cost of repair by tablet owners is reduced by using cheap glue that is absolutely unsuitable for this purpose. Too liquid adhesive may get inside, and furthermore, as a result of further use, the glass may come off, causing serious damage to the functionality of the iPad.

Urgent iPad 2 repair - glass replacement is inevitable

A broken glass tablet module is fraught with many more dangers than it might seem at first glance, so we strongly advise against using the iPad in this form (even if it is still functioning) and immediately contact our service center for help. The sooner you contact us (even if it’s just a crack), the less unpleasant consequences there will be.

If you immediately replace the glass on the iPad 2, the repair price will be cheaper, since other parts involved in the operation of the tablet will not have time to suffer. The same factor directly affects the duration of repair work carried out by our master. If nothing else is damaged except the glass surface, this is a maximum of 20-30 minutes.

Professional iPad 2 repair, glass replacement - price

We strictly follow the technology for carrying out repair work, so we never use the popular superglue, which many ordinary people consider the best option for repairing equipment. In fact, it will cause the glass surface to crack or shatter at the slightest impact. Our craftsmen use special tape, which is applied only to well-cleaned and grease-free surfaces.

If you are wondering how much it costs to replace the glass on an iPad 2, you must understand that the work of a master cannot be free. By entrusting your equipment to a professional with many years of experience, you can be sure that:

  • dust, moisture, and dirt will not get inside the device;
  • not a single malfunction will go unnoticed by a specialist;
  • You will have only original spare parts installed with a guarantee;
  • The iPad will function 100%.

We know exactly how much it costs to replace glass on an iPad 2 in our service center and are ready to answer this question at your request. We draw your attention to the fact that the specialist’s work can be complicated by crumpled corners of the tablet, which increases the time required for repair work and, accordingly, the final cost of the service.

Which mobile devices break down most often? Those that people like to use are constantly in their hands and sometimes fall: mobile phones, smartphones and tablets. In percentage terms, among the tablets on hand, the most Apple iPad different generations. Just a week ago I found out that the official Apple service does not repair devices, but replaces them with new ones at an additional cost. I start with this material new series for repairs mobile devices Apole and more. Therefore, when sending your iPhone or iPad for repair, know that they will replace the broken parts with non-original ones. The quality of the repair will depend not only on the technician, but also on the selected parts and their prices.

How to replace broken screen in Apple iPad 2 GSM 64 Gb? Using this example, I’ll tell you and show you how to replace safety glass Apple iPad 2. I will explain how, if necessary, replace the display, repair a broken Home button and a number of other elements. Repairing an Apple iPad 2 is similar to repairing an Apple iPad New; the devices are assembled in the same case. Apple iPad Wi-Fi is easier repair than the version with GSM and GPS module, due to the lack of additional antennas.

It is advisable to turn off any device before starting repairs, to protect yourself from errors. But this is not always possible, for example, the area of ​​the screen where the shutdown slider is located has stopped responding or the Power button has broken. Considered case of iPad repair without turning off the device.

The iPad comes apart from the front. However, like the iPhone 3G and iPhone 5. First, you need to remove the protective glass of the iPad. The frame around the display is heated with a hairdryer to melt the factory glue, the temperature is about 140 degrees. Next, insert a scalpel or a stationery knife into the lower right or upper right corner and slowly peel off the protective glass. When the gap is large enough to insert the second blade, insert it and slide it up or down the long edge. Instead of a scalpel, you can use ordinary plastic picks; working with plastic instruments reduces the likelihood of damaging the device. The task is to walk along the perimeter of the frame and stop in the lower left corner, where there is a capacitive touch glass cable.

Peeling off the glass with a blade should be stopped a centimeter before the volume buttons, so as not to damage the cable. Next you need to peel the glass to the side Home buttons, stop also a centimeter away. When the corner of the protective glass is torn away from the aluminum body, it must be pulled until there is a noticeable tension. The protective glass on the iPad is durable and will not crack even with significant bending. The cables will be visible in the gaps that appear; carefully press them against the body and continue to remove the glass with a scalpel. Go to the lower left corner past the Home button.

Then you return to the top edge, behind the Power button you need to be extremely careful, there is a GSM antenna and its cable. It is necessary to peel off the glass by pressing the antenna against the body. The next antenna is GPS, it is attached more securely than GSM; tear the glass away from it with a bold movement. The left side peels off without any special tricks, and at this point the first and most difficult stage has been completed.

If one of the cables is damaged when removing the protective glass, make repairs more difficult. It will be necessary to splice the halves of the train; or replace the entire module. For example, a GSM antenna and its cable that goes under the display.

Opening the iPad frees the display matrix and controls from captivity. The Home button is removed along with the broken protective glass. Second, you need to remove the iPad display. Unscrew several screws in the corners of the matrix frame. Lift the display, find the cable fastening latch and open it by hooking it with a blade. Remove the cable from the connector and put the iPad display aside. If the Apple iPad display itself is damaged, replace it with a new one and put everything back together.

Third, remove the cable in the same way touch screen iPad. Please note, if you are repairing an iPad that is turned on, after removing the display and capacitive glass cables, you cannot press the Home and Power buttons; the backlight in the device will turn off. By pressing these buttons, the Apple iPad sends a signal to the cables; their absence will give 0 and the tablet will stop working with them. There is nothing wrong with turning off the backlight; the repaired iPad will start working normally after a reboot.

What an iPad looks like under an x-ray does not give the same impression as a live opening of the tablet. Takes up the lion's share of space on the iPad battery. The batteries are permanently glued and replacement is almost never required. Frequent breakdowns in the iPad are: failure of the Home and Power buttons, and the 30-pion connector. The device is so simple and elegant inside that there is nothing left to break mechanically. The Home button is removed when repairing a broken display; I will not consider it separately. In order to replace Power button on the iPad, after removing the protective glass, you need to unscrew the two screws on the right side, disconnect the cable and change the button module.

I will not consider breakdowns and repairs of the Apple iPad when the tablet is wet, damp, flooded with water or drowned in this material. Most often, for such repairs, the tablet needs to be removed metal screens from the motherboard and solder the chips.

When an Apple iPad 2 or iPad New is dropped, it happens that the aluminum case is dented, most often a corner. It is necessary to evaluate whether the protective glass fits tightly into place. If not, then use a file to grind off the jammed area of ​​the body. After such an operation Apple device looks bitten off like a logo. During the repair process, the task was slightly changed: how to make an iPad out of a white black iPad. All the color on the iPad is concentrated in the frame around the display. There is also white plastic in the edging of the case, in the 3.5 jack connector and 30-pin connector, but not enough to attract attention.

Pay attention to the upper left corner and the upper edge of the Apple iPad 2 GSM; there is a GSM module and two antennas here. IN Wi-Fi versions iPad these elements are missing. The sore spot in the iPad 2 is the cable from the GSM modem to motherboard. This 50-wire cable is attached to conductive adhesive and comes off when subjected to a strong impact or fall. Its damage is fraught with the following problems: iPad does not see sim card, disappears GSM communication, the GPRS session is constantly interrupted, the tablet does not find GPS satellites. Replacing a cable is a complex operation; such repairs cannot be performed at home. The repair consists of replacing the cable with 50 soldered thin wires.

Fourth, remove the Home button from the old glass and apply it to the two contacts under the display. The operation of precise positioning of the button relative to the iPad body and the frame so that the part does not move to the side when gluing. Double-sided tape is glued to the edges of the Home button, which lies on the contacts. The new glass is placed in place and the button is glued to it. After this, the glass is removed along with the button.

Reconnect the display and protective glass cables. The display is secured with screws.

Fifth, for repairing iPads and other tablets, they invented and successfully sell 3M double-sided tape. The adhesive tape has rounded edges, the radius of which is exactly the same as the radius of the corners of the iPad. Corners are glued to corners, longitudinal stripes are glued to the edge of the tablet. Add two drops of Super Moment Gel glue to the lower left corner, where the screen cable runs. Super Moment is needed to protect the loop from breaking; in direct sunlight sun rays The iPad gets hot and the glass may peel off.

Sixth, remove the film from the second side of the tape and attach the protective glass in place. On this iPad repair finished. Replacing the glass on an iPad takes about two hours of work if you know for sure what is what.

When your iPhone 5 breaks down in St. Petersburg and needs to be repaired, you will be the first to know about it. Evgeniy, an Apple equipment repairman, has cut his teeth on all previous generations of iPhone. Apple appliances is simple and repairing the iPhone 5 does not foretell any great difficulties. I hope that the new “Service” section about device repair will find its readers, then I can prepare new reviews and instructions. If you have any questions about repairs or replacements broken glass in iPad 2, then call +7 911 099 13 33 or write comments. We will try to respond promptly to everyone who encounters a breakdown and iPhone repair. Website of our service and online store Approble.net.

Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.

If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.

Warranty and responsibility

A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.

Half the battle is Apple repair- this is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts for current models, so that you do not have to waste extra time.

Free diagnostics

This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.

Service repairs and delivery

Good service We value your time, which is why we offer free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Company age and experience

Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
They trust us and convey complex cases other service centers.

How many masters in areas

If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.

The cost of replacing glass on an iPad includes the price of a new touchscreen and the service. In the offices of the trade and service company VseEkrany.RU it is a little more than 2 thousand rubles for iPad 2, 3 and 4; 3 thousand rubles - For iPad mini, mini 2, mini 3 and iPad Air. This amount may surprise some clients, even make them wary, since it is sometimes impossible to buy an original sensor with it, but with us it also includes the cost of professional installation in a workshop. There are so many reasons to doubt the quality of the services we provide. But in reality they have no basis. Install low prices For branded components for Apple smartphones and tablets, we have good relationships with direct suppliers of spare parts from the manufacturer’s Chinese factories. An indication of their location should not confuse you: Apple has long moved the production and assembly of its equipment to China, where it is much cheaper to do all this. However, this does not mean that all spare parts for Apple tablets imported from this country are original. A significantly smaller part of them, produced precisely at the official factories of the Californian corporation, corresponds to technical requirements devices. The quality of other spare parts raises a number of questions. And although the cost of replacing glass on an iPad using copies is significantly lower than the price of service with the originals, we would not advise you to give preference to the cheaper option. A cheap copy will never be a full replacement for a branded touchscreen. Moreover, it can cause additional breakdowns, the elimination of which will reduce the previously achieved savings to nothing. If you do not want to become a hostage to service centers, approach solving repair problems soberly and competently. The VseEkrany.RU company daily proves from its own experience that high-quality service can be affordable for any iPad owner. The cost of professional installation of a touchscreen on an Apple tablet in any of our offices will be only 300 rubles. You, of course, can refuse the help of our masters, but if you do this, then, obviously, not with the great goal of reducing costs. Those who order only original touch glass from us either want to learn a useful skill, or are forced to rely only on themselves, due to the fact that they are in neighboring regions. For residents of Moscow, we can offer a repairman to come to your home, where the service will take the same amount of time as it would have taken if it had been carried out within the walls of the workshop. We can help iPad owners from other regions of the Russian Federation in only one way - by sending a high-quality spare part by mail. You can get details about the latest version of cooperation by contacting our representatives at the numbers indicated on the website. They are also intended to accept applications from Muscovites who want a master to come to their home. Even with on-site service, you are unlikely to be embarrassed by the cost of replacing the glass on your iPad.

  • Repair in 15-30 minutes from 990 rub.
  • On-site repairs in Moscow and Moscow Region
  • 314 service centers

Replace the glass on your iPad exclusively in a specialized network of services, whose employees can guarantee you both accuracy in carrying out this labor-intensive procedure and the use of high-quality spare parts and a special composition for attaching the sensor. We present information about 314 reliable centers in our city.

Please be sure to note that the installation of the touch glass on the , and should only be carried out using double-sided tape from a certain American company, otherwise, if you put it on glue, large-scale damage in the future when disassembling the tablet and replacing other parts will not be avoidable.

The organizations presented on the site, rest assured, employ highly qualified specialists who competently perform such operations on a daily basis. You will also be pleasantly surprised by the warranty period provided by the craftsmen for their work.

Price for replacing iPad glass with a technician visiting your home

If you want to spend this procedure at home - you just need to leave a request on the website or contact the operators hotline by phone 8-800-775-90-67.

Repair the sensor or change the touchscreen?

Many customers ask us: is it possible to repair the sensor or change it immediately? Most problems that cause touchscreen failure require replacement of the iPad screen. By the way, do not confuse the display (which displays the image) and the screen (which responds to touches).

Despite its apparent strength, tablet glass is a fragile material, constantly exposed to external influences and therefore so vulnerable. If your device has stopped responding to touch or the use of the tablet is difficult due to scuffs or scratches on the surface, contact a service center as soon as possible, any of those presented on the website, and then you are guaranteed to receive qualified assistance in a short time!

When is a sensor replacement necessary?

There are several reasons when a screen replacement is needed:

  • firstly, due to the appearance of chips and cracks on the screen, making it impossible correct operation with a tablet;
  • secondly, if the tablet does not respond to touch or reacts incorrectly;
  • thirdly, if part of the sensor has stopped functioning;
  • fourthly, if streaks appear when you press the screen.

Please note that to replace glass on an iPad, both original and AAA parts can be used. In the latter case, it is worth knowing that these spare parts, while not inferior in overall quality, are slightly less resistant to mechanical stress.

Common reasons for replacing iPad glass

Among the common reasons leading to replacing the screen on an iPad, of course, one cannot fail to mention a fall or a strong blow, although in fairness it should be noted that even a small crack can lead to a complete loss of sensor sensitivity. Since the display and screen are changed separately on the tablet, be sure to carry out preliminary diagnostics to know exactly what needs to be changed.

The specialists from the services listed above will complete this procedure in less than 15 minutes, after which it will take about another hour for the repair itself.

How much does it cost to replace iPad glass?

Device Price on departure Price in service centers
iPad 1
iPad 2 from RUB 1,990
iPad 2017
iPad Pro 9.7 (2018)
iPad 3
iPad 4 from RUB 2,590
iPad Air from RUB 2,590
iPad Air 2 from 15,090 rub.
iPad mini from RUB 2,790
iPad mini 3 from RUB 2,990
iPad mini 4 from RUB 12,590
iPad mini Retina from RUB 2,990
iPad Pro 9.7 (2016)
Problems