Many users are afraid to use to speed up their work. operating system optimization programs whose operating principle is unknown. Therefore, to improve OS performance, we recommend using built-in tools. Among them it is worth highlighting quick start Windows 10. This feature allows you to speed up the loading of the initial window several times.
How to enable Fast Start in Windows 10?
To enable fast boot OS Windows 10, you should follow these steps:
- Click “Start”, “Control Panel”. Set the viewing mode to “Large icons” and select the “Power Options” section.
- In the left menu, select “Power button actions.”
- In the next window, you need to click on the “Change settings that are currently unavailable” button.
- In the new window, lower the scroll slider down and in the “Options” shutdown» Check the box “Enable fast startup (recommended)”.
- Save the changes.
IMPORTANT! If there is no “Quick Startup” item in the “Control Panel” section or you cannot enable it, this means that hibernation mode is disabled in the OS. It needs to be turned on. To do this, enter the command “powercfg /hibernate on” in the command line with administrator rights. Only after this the required item will appear.
How to disable fast startup of the operating system in Windows 10?
If you are satisfied with the boot speed of your operating system or this function causes errors, interferes with the normal operation of some applications, it is worth disabling it. There are several ways to do this.
Method No. 1
- We perform all the same actions as when turning it on quick start. Uncheck the desired item.
- Click “Save changes”.
Method No. 2
- Press “Win+R” and enter “regedit”.
- Go to the branch “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power” and find the “HiberbootEnabled” parameter. Its value must be "0" for the fast boot feature to be disabled. To enable it, set the parameter to “1”.
After this, we restart the computer.
Windows 10 is a new operating system that introduces some features that are missing in previous versions OS. One of these innovations is the fast startup of Windows 10.
If this mode is set on your computer, the system closes everything open applications, logs out all user accounts.
In principle, at this moment, the state of the system can be compared with its initial launch, when it is already running, but not a single application is running by any user.
However, the kernel of Windows 10 itself is loaded, so the system session continues to work. The OS warns the driver about entering a new “sleep” mode, only after which the computer is turned off.
When you subsequently press the power button to start the OS, it will be much easier for the system to execute such a command.
She will not have to load the kernel or drivers; she will only need to send a command to load the system image into the RAM, indicating the launch of the Windows 10 operating system.
It is for this reason that you can turn on and off a PC with Windows 10 installed, accompanied by this mode, almost instantly.
Enabling or disabling accelerated OS boot
Having realized how important fast startup is, many strive to quickly do everything so that they have Windows 10 fast boot activated, but they don’t know how to enable or disable it.
It is for this reason that it is important not only to figure out how to enable Windows 10 fast startup, but also to find out how important it is directly for you, as a user.
Reasons for shutdown
According to outside observations, it is safe to say that most users are actively looking for information on how to disable fast startup in Windows 10 than on how to enable it.
This is not surprising, since fast loading comes with some significant disadvantages that many are trying to get rid of.
First of all, instant booting prevents your computer from shutting down completely. It may prevent disk images from being encrypted.
Some devices, unfortunately, do not support sleep mode, so subsequent loading of the operating system may be accompanied by serious problems.
Also, disabling fast boot in Windows 10 is important for those users who have two hard drives with different operating systems. Launching in such an accelerated mode simply blocks hard drive, so you won’t be able to boot from another OS.
And lastly, some BIOS versions do not support accelerated boot, so if you want to enter it, you will not be able to. Of course, you can use a little trick: do not turn off the computer, but force a reboot.
Now that you understand what problems can arise due to accelerated loading enabled, only you can decide for yourself whether you need it or not. If you don’t need it, study the algorithm of actions indicating how to remove the quick loading Windows 10.
Algorithm of actions
Initially, press two keys at the same time: the first key with the Windows shortcut, and the second with the English letter X.
The screen will appear context menu, which will list important parameters. Select the “Power Management” line and click on it.
Now a window will open in front of you with many functions and options related to power supply. On the left side there will be an item “Actions of the power buttons”, hover your mouse over it and click on it.
Select "Power Button Actions" and move to the next screen
The following page will open, in which at the very top you will see the phrase “Change settings that are not currently available.” Click on it to bring up the “Completion Options” section.
Among the listed options, the first place will be the line “Enable fast startup”. Nearby there will be a tempting word “recommended”, which inexperienced users are blindly led to.
Pay attention to the nearby checkbox. If there is a checkmark in it, you can be sure that accelerated startup of the operating system is activated; if it is not there, vice versa. If you want to turn off this mode, uncheck the checkbox.
By the way, you can enable or disable accelerated loading of the OS in the registry. Use this simple method.
Go to the registry editor, find the branch there, going through one by one until you find .
Your goal is to detect such a registry entry “HiberbootEnabled”, opposite which is directly set its value, which looks like this: dword: 00000001.
Pay attention to the last digit of the found parameter. The installed unit indicates the activation of accelerated loading. If you want to get rid of it, set zero instead of one. This completes the shutdown process.
In cases where you really want to turn it on, you should do the same steps, only exactly the opposite.
It may happen that in the “Shutdown Options” you will not find a line that allows you to activate instant startup.
This indicates that hibernation mode is disabled on your computer. Connect it and enjoy all the other privileges. It will help you with this command line, in which write powercfg /h on and wait for the command to complete.
So, the process of enabling and disabling instant loading of the operating system is possible even for a novice user who feels the need for it and, accordingly, has previously armed himself with the necessary knowledge by studying the algorithm of actions.
In Windows 8, Microsoft introduced a way to boot your computer faster. This feature is called "Quick Start". Currently, in Windows 7, users can either turn off their computer or put it into sleep mode, otherwise known as hibernation. According to the study, it was found that hibernation mode (another mode of shutting down the computer, in which only the hard drive remained active) was used by a very small percentage of users.
Quick Start in Windows 8
The new "Fast Startup" mode in the Windows 8 operating system is a kind of hybrid of a traditional cold boot and the computer's recovery from hibernation mode. In Windows 7, when the operating system shuts down, both the user session and the operating system kernel session are closed. But when turning off Windows 8, the kernel session does not close, but goes into hibernation. Unlike full data hibernation, which has a very large file size, kernel-only hibernation leaves a very small hibernation file. As a result, it takes much less time to burn it to disk. Using this file will save a lot of time the next time you start Windows 8.
The Fast Startup option is enabled by default in Windows 8. You can access its configuration here: press the keyboard shortcut Windows + W to print " Power" into the search box and press Enter to get to the " Power Options"(Power Options). You can also click on the power icon in the notification area and select " Additional options nutrition» (More Power Options), which will take you to the same window.
When you click on " Power Options» (Power Options) the following window will open. In the left panel you will see options: Choose what the power buttons do(Choose what the power buttons do). Click on it. Here you will see that the recommended setting box is checked by default. This is one of the reasons why Windows 8 starts up faster. Uncheck the box " Quick start"(Turn on fast startup). This setting starts working only after the computer is turned off, and not after a reboot.
How to disable Windows 8 Fast Startup?
We have just reviewed one of thousands of new Windows features 8 – “Quick Start”, which is also known as “Hybrid Boot”. We have already looked at how the Quick Launch feature can be disabled. The job of this function is to save the current session of the kernel and device drivers in the hyberfil.sis file.
Using this concept, Windows 8 is able to give you 30-65% faster startup after shutting down your computer. Thus, compared to more earlier versions, Windows 8 wins the race in this segment. Moreover, if you have motherboard with UEFI, then “Quick Start” will be even faster!
But there are some settings for this mode that you can change. If you are using multi-user systems, other users may change this setting and you will not be able to enjoy fast boot times.
Disabling the option to turn off Fast Startup in Windows 8
You can do this in two ways:
- Using the Registry Editor, which is available for all editions of Windows.
- Using the Local Editor group policy, which is only available to the two most powerful editions of Windows.
Using the Registry Editor
- Press the Windows key and R at the same time and write " regedit" in the dialog box.
- Go to the following registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System".
- Right-click on the right side of the window. Create a "DWORD" value and name it " HiberbootEnabled».
- Right-click on the "DWORD" value created above, select "Edit". You will get this window:
- You can now use the following values for the "Value" string:
- "Hybrid boot" always enabled = 0 (default)
- Close Registry Editor and restart your computer to see the results of your work.
Using the Local Policy Editor
- Click Windows key and R at the same time, write “gpedit.msc” in the dialog box that appears, then click OK.
- In the left pane, go to: “Computer Configuration -> Administrative Templates -> Control Panel -> Personalization”
- Now look at the right panel where you got the Require use of fast startup window.
- Double click on this policy to get the following window.
- You can now use the following options:
- Turn on
- Disable/Not configured (default)
After making changes, click the "Apply" button, then "OK". In order to see the results of the work, you must either restart the computer or update the computer policy.
That's all I wanted to tell you about what I think is a very successful Quick Launch mode in the Windows 8 and Windows 8.1 operating systems.
Windows 10 has many options that you might not even know about. In this article, we will look at how to enable Fast Startup in Windows 10. The Fast Startup feature itself is present in Windows 10, and many users are not even aware of it.
Quick Startup in Windows is designed exclusively for people who cannot break the habit of turning off their computer. When Fast Startup is enabled, turning on your computer after shutting down is faster. And you will be able to see faster home screen or desktop.
The quick startup of Winodws 10 is associated with the hibernation mode, in that during the quick startup the hiberfil.sys file will be used. In which the system, when turned off, saves the kernel and loaded Windows drivers 10. The system boot process in this case is similar to exiting.
- Open the Control Panel by clicking Win+R and running the command Control. Other ways to open Control Panel.
- In the window that opens, go to Power supply and click on What the power buttons do.
- Then we look for the item Changing settings that are currently unavailable,
This action requires administrator rights.
- After this, the item is activated Shutdown options in fact, in which you can enable or disable the item Enable Fast Startup (recommended).
Now we have enabled fast startup, you can similarly disable it. But remember that fast startup uses the hiberfil.sys file, which takes up space. But compared to hibernation, using only fast launch loads this file less.
Disabling Windows 10 Fast Startup
Since fast startup is directly related to hibernation, you can simply disable fast startup settings by making changes to the registry.
After turning off fast startup and hibernation, the hiberfil.sys file will be deleted from your local disk. Which will actually increase the free memory on your local disk.
Enable Fast Startup in Windows 10 automatically
This method includes everything automatically; you just need to run the executable file, which we will create ourselves.
- We create text file into which we paste the following code:
@echo off:: To enable hibernate
powercfg -h on:: To turn on Fast Startup
REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 1 /F - Changing the file resolution from .txt on .bat. You may need an article.
Conclusions
In this article, we looked at how to enable Windows 10 Fast Startup and how to disable Fast Startup. The method itself is similar to the methods of enabling and disabling hibernation mode that we discussed earlier.
Perhaps not everyone realizes, but quick startup has been used in Windows for a long time. We recommend that you use the third method, turning on fast loading in automatic mode.
If you have to turn your computer off and on often, you should pay attention to the Quick Start feature. The Windows 10 operating system uses it by default, but under some circumstances it can be disabled. There are also times when fast startup needs to be deactivated.
How does Fast Startup affect Windows 10?
If fast startup (hereinafter referred to as “QL” for brevity) is disabled, the computer turns off and turns on in normal mode: when disabled, all applications are closed and current processes are terminated, and at startup only applications that are in the startup list are automatically loaded.
If the knowledge base is activated, hibernation technology is used: when turned off, information about running applications user and system processes is saved to a file on the hard drive, and when turned on it is extracted from it. This will log you out of the system if your account A password has been set; when you turn it on again, you will have to enter it again.
The diagram shows the time it takes to launch in different modes
Knowledge base reduces the time spent on fully loading the operating system. Of course, there is a Sleep mode that allows you to quickly stop and resume your computer. But it is not suitable if the task is to disconnect the computer from the network or restart it.
Activating and deactivating the mode
By default, the BZ mode is activated. Going into system settings, you can see that Windows recommends leaving it enabled. But some user actions may lead to this mode will be turned off. Therefore, if you need a faster startup, you need to check its status.
There are situations when the knowledge base interferes with the performance of a particular operation. In this case, it must be disabled. You usually have to do this because the hibernation file takes up too much space on your hard drive, but such cases are extremely rare.
Using Power Options
The operating system allows you to configure settings for turning on, shutting down, and operating your computer. A special section “Power supply” is intended for this:
- Using the system search bar, find the control panel and open it.
Opening the control panel - Find the "Power Options" block and go to it. If it is not on the main page of the window, use the built-in search bar.
Open the “Power Options” section - Click on the line “Actions of the power buttons”.
Click on the line “Actions of the power buttons” - Click on the "Change settings that are currently unavailable" option. You will need administrator rights to access the shutdown settings.
Click on the line “Change settings that are currently unavailable” - Check or uncheck the "Quick Launch" box. Done, depending on your action the mode is activated or deactivated.
Check the box next to the “Quick launch” option
Using the registry
The registry stores information about all system parameters. You need to work with it carefully, since changing the wrong values will break Windows or certain functions.
Video: Setting up Fast Launch in Windows 10
What to do if there is no mode button
When you go to the power settings in the control panel, you may find that the “Quick Start” line is missing, which makes it impossible to activate the mode. This happens because hibernation is disabled - without it it is impossible to enable the mode. You need to activate hibernation manually:
Done, after a few seconds hibernation will be activated. Open the control panel again and follow the steps required to enable the knowledge base. This time, the Quick Start option will appear in the Power Options.
Quick startup is useful for those who want to reduce the time it takes to boot the system. You can enable or disable it through the Control Panel and Registry Editor. If you don't have an option to control the state of the mode, you must manually enable hibernation.
Problems
