How to manually tune channels on a Philips TV. Setting up Philips TVs - Technical support. Why Smart TV does not work on a Philips TV Philips smart TV does not connect to the Internet

To connect the TV to your home local network or to the Internet, you need a router that must support the DHCP protocol (this mode must be enabled).

It is possible to access files on a PC directly from the TV. To do this, you need to install the latest version of the media server on your computer (for example, Windows Media Player 11).

Wired connection (LAN)

Connect your router to your TV using an Ethernet cable. To comply with EMC requirements, you must use an Ethernet FTP Cat cable. 5E.

Connect your router to your TV and turn on the router before starting installation.
To start setting up your network, click the button with the house icon on it, then select Settings; ‒> Connect to the network;.
Next, follow the instructions on the screen - the TV will search for a network to connect to. When prompted, you must agree to the terms of the End User License Agreement.

Wireless connection (WiFi)

You can connect your TV to a wireless network using a WiFi-enabled router and the PTA01 wireless adapter.

Turn on your wireless router
Insert the specified WiFi adapter into the USB connector on the side of the TV. The wireless connection setup will begin immediately:

WPS(WiFi Protected Setup).

If your router supports the WPS function, press the WPS button on it.
After 2 minutes, select Easy Access from the TV menu; and click OK;. If you need to enter a PIN code, press PIN code in the TV menu; ‒> OK; and then enter the PIN code that appears on the screen into the settings of your router. If you need to enter the security key manually, click Set. user; ‒> OK; and enter the encryption key using the TV remote control. After this, the TV will connect to your home network and the setup will be completed.

If there are several routers on the network, you can select the network to use by clicking the Scan button; and Easy access; to select the desired network.

TVs Philips can be connected to the Internet or to a home local network, you will need a router that supports the DHCP protocol (of course, this mode should be enabled before setting up the connection).

You can also connect the TV directly to your home computer to view files stored on its hard drives. In this case, it is necessary that the newest version of the media server is installed on the PC, for example, 11 or 12.

Wired connection (LAN)

It must be connected to the TV using an Ethernet connector. To achieve EMC compliance, you must use an Ethernet FTP Cat cable. 5E.

Before you start setting the parameters, turn on the router.

Now you can start setting up your TV connection settings. By pressing the button with the image of a house, enter the menu, open the item “ Settings" and then select the sub-item " Network connection».

Follow the prompts that will appear on the screen. The TV will search for an available network to connect to. After this, a window with a license agreement will appear on the screen, which, after reading, you must agree to by pressing the appropriate button.

Wireless connection (WiFi)

TVs provide the ability to connect to the network via a wireless connection. To make such a connection, you will need a PTA01 USB adapter for your TV and a router with WiFi connection support.

Turn on the router, then connect the above-mentioned network adapter to the USB connector of the TV (located on the side panel). The connection process will automatically start immediately.

Setup in WiFi Protected Setup mode. (the router must support this feature) is performed as follows:

Press the “WPS” button on the router and wait the 2 minutes it takes for the TV to connect to the network.

After two minutes, open the TV menu and select the “Easy access” item, then confirm the action by pressing the “OK” button.

If you need to enter a PIN code, select “PIN code” -> “OK”. On the screen you will see a PIN code that must be entered into the router settings.

If there is a need to manually enter the security key, you need to select “Set. user" -> “OK” and enter the key using the TV remote control.

After completing all these steps, connecting the TV to the network is complete.

If you use several routers, you can select one of them. To do this, you must select “Scan.” -> “Easy access.”

The first step is to connect your Philips TV to the router using a network cable or Wi-Fi; the ways in which this can be done are described in detail in the article How to connect your TV to the Internet . In this example, I will connect the TV to the router using a network cable (the difference from setting up Wi-Fi is only one step).

We go to the main menu of the TV, to do this, press the button with the image of the House, in the future I will call this button “Home”.

Select the "Configuration" item.

Next, select “Network Connection”.

Select the connection type "Wireless" or "Wired". The wireless method involves connecting to a router using a Wi-Fi network, the wired method means connecting to a router using a network cable connected to the router.

If you connect via Wi-Fi, you need to select your network from the list of available Wi-Fi networks and enter a password to connect to it. If “Wired”, then you need to connect the TV to the router using a network cable. As a result, you should receive a window indicating a successful connection to the network.

After this, you need to update the TV's firmware to fix errors in the previous software version. To do this, press the "Home" button on the TV remote control and select "Configuration".

In the menu, click "Software Update".

Specify where the firmware will be downloaded from, in this example “Internet”.

Next, the TV will check if there are new versions of the software for the TV; if there is, it will offer to update them. You need to agree to the firmware update. If there are no new versions of the software, a window will open informing you that you already have the latest version of the software installed.

Now you can safely launch Smart TV on your Philips TV, to do this, press the "Home" button on the remote control and select "Browse Net TV".

When you first launch Smart TV on a Philips TV, you must agree to the terms of provision of Smart TV and select some settings, this will only be done once, and similar offers will not appear in the future. The first thing that will open is the Smart TV Terms of Service, which you must agree to.

After this, a window will open in which you need to agree to the use of Cookies.

The next step will ask you to register with Philips, this procedure is voluntary, so it’s up to you to decide whether you want to register or not, in this example I’m ignoring registration.

Then a window will open asking you to remember what you are watching in order to provide you with recommendations for watching what interests you. I prefer not to use this functionality, so I will select "Do not connect".

In the next step, you will be asked to block applications with an 18+ rating, here the choice is yours, if you enable this function, then 18+ applications will be prohibited from viewing (in the future, this functionality can be turned on or off).

This completes the list of questions; in the future, when Smart TV is launched, they will no longer be there. As a result, a window will open in which you will see a list of applications installed by default, among them there is a browser with which you can visit any web pages and ready-made applications to watch movies, TV shows, cartoons, etc.

If you encounter problems setting up Smart TV on a Philips TV, the first thing you need to check is the network configuration of the TV, to do this, go to the menu (the "Home" button on the control panel) and go to "Configuration" - "Network Settings".

By selecting "View Network Settings" you will see your TV's network settings.

The main thing you should pay attention to is the “IP address” field, the address 192.168.X.Y should be written in it (for example 192.168.1.10 or 192.168.0.15), this means that your TV has received the network settings of the router and they “see " each other. If your Smart TV does not work, you need to check the settings of your router.

Here are some more popular reasons why Smart TV may not work on your TV:

Connecting the provider cable directly to the TV. You need to connect the provider's cable to the router, set up the Internet, and only then connect the TV to the router (via Wi-Fi or using a network cable). Only if your provider provides Dynamic IP, then the cable can be connected directly to the TV.

Check the operation of the router. I encountered the following problem: when connecting to a router, the TV gives an error stating that it cannot receive network settings, although the laptop works fine from the same router. The solution to this problem was to update the router firmware, after which the TV received network settings and Smart TV worked safely. Those. Don’t forget about the router and its impact on the operation of Smart TV.

Updating the TV firmware When setting up the TV for the first time and when using it in the future, be sure to install the latest version of the software, otherwise you may encounter the fact that all applications or some of them will not work.

Philips is a famous brand. The Dutch company of the same name has existed since 1891 and supplies original technical products to markets in different countries.

All of them are distinguished by the quality and thoughtfulness of details. SMART TVs are also included in this list.

Each model uses its own developments and innovative solutions. This concerns image quality, sound, ergonomics, safety and user convenience. The issue of caring for the environment is not ignored: wise consumption of electricity, safe disposal, etc.

Most modern Philips smart TV models run on the popular Android TV operating system. Early versions (before 2014) and some inexpensive current models use the Smart TV platform; it includes the MyRemote, SimplyShare, and Net TV applications.

Settings depend on the device platform and model. Below we will consider the procedure in the light of connection methods.

Philips Smart TV installation has two technical options.

Method one: wireless

You can set up access to smart TV on your home screen via a Wi-Fi network. In order for numerous applications to become an integral part of Philips, it is necessary to use the help of such technical guides as:

router supporting Wi-Fi network;
wireless adapter (PTA01).

Philips Smart TV connection sequence:

Turn on the router.
Find a special USB connector on the side panel of the TV receiver.
Insert the adapter into the USB connector.
To configure the wireless offer, you need to press the WHS button on the router.
Wait approximately two minutes.
Find the “Easy Access” line in the menu, confirm the selected function with the OK button (if necessary, enter and confirm the PIN code upon request. Click in the Pin Code menu – OK - insert the suggested PIN).
When prompted for a security key, the sequence is as follows: Install. User – OK – dial the key on the TV remote control.

This action program will allow the configured TV to join your home network. If more than one router is found, the network is selected using the Scan buttons. and Easy access.

Method 2: wired connection

With this method, to connect to the smart you need an Ethnernet FTP cable and a router.

Connect the router to the TV receiver and turn on the conductor.
Press the button on the remote control with the image of a house.
Select Settings – Network connection.
Follow the menu items and instructions on the screen.
Confirm the request for an agreement with the terms and conditions for the user.

How to set up IPTV on Philips TV

Setting up IPTV on a Philips TV is done through the ForkSmart smart TV widget. The sequence of actions is as follows:

Go to Philips setup.
Click view parameters.
Write down the numbers and letters that appear on the screen.

Hello! I got a Philips TV, which has a Smart TV system built on Android TV. And in this article, I will show you how to connect a Philips TV on Android TV to a Wi-Fi network to access the Internet, watch online movies, YouTube videos and watch movies from your computer. An Android TV has a lot of options. We will definitely look at everything in separate articles. Well, first, you need to connect the TV to the Internet, and preferably wirelessly - via Wi-Fi. Without an Internet connection, most of the functions of such a TV are probably simply unavailable. The main reason you bought TVs with Smart TV was to watch online movies, install some applications and games, have access to various movies and photos that are on the computer, etc.

When I was choosing a TV, I immediately looked towards LG with Web OS (which we connected to the Internet in the article). But it so happened that I bought Philips 43PUS7150/12 (2015 model). This is what we will now connect to the Internet. If you have a different model, then it’s okay, almost everything is the same.

Of course, you must have a Wi-Fi network configured. That is, the router that distributes it. Well, the Internet via Wi-Fi should work. And the TV must be within range of your home Wi-Fi network. Also, the TV must have a built-in Wi-Fi receiver. Or, a proprietary external adapter PTA128/00 is connected.

Connecting Philips (Android TV) to Wi-Fi

If during setup (at first turn on) If you are not connected to the Internet, then this can be done from the Android TV settings themselves. Turn on the TV and press the button with the image of a house on the remote control.

Scroll to the very bottom of the menu, there will be settings there. Select wired and wireless networks.

Select an item Wired or Wi-Fi, and press the right arrow on the remote control.

Select an item Network connection.

Please note that the Philips TV can be connected to Wi-Fi without entering a password, but through WPS, or WPS with pin code.

It works like this: select the WPS item, and on the router we activate the WPS function with a special button, which is usually located on the device’s body. The TV will connect to the router. By selecting WPS with pin code, you will need to enter the pin code set on your router. If you have not changed it, it may be indicated on a sticker on the bottom of the router.

Select a Wi-Fi network to connect to.

Using the keyboard on the screen, or on the remote control, enter the password to connect to your wireless network, and click on the green button (on-screen keyboard) to continue.

The TV will connect to the network. Click Complete.

That's all, you can use Android TV. Open in the TV browser:

In the future, the TV will automatically connect to this Wi-Fi network.

If your Philips TV doesn't connect to Wi-Fi

First of all, try rebooting the router (just unplug and plug in).

Also, be sure to make sure that you enter the correct password to connect to the wireless network. If you have forgotten your password, you can try. If you enter the password incorrectly, then at first the message will hang for a very long time Connection...

And then, most likely, the inscription will appear Can't find network.

What else you can try: change the password to a new one of 8 digits, reset the router settings, and configure it again. If the TV does not want to connect to a wireless network, then you can try connecting it to another network, if possible.

Advanced wireless network settings

Having selected the settings for wired and wireless networks in the Android TV system, you can also set static data (IP address, DNS) for connecting to the network. Just go to the tab Network configuration, and select Static IP address. And then, on the tab Setting up a static IP address set the required parameters.

But, it’s better not to meddle with these settings unnecessarily. If it does not connect, then install DHCP back. This is an automatic acquisition of an IP address from the router.

You can also view the parameters of the network to which you are currently connected. To do this, select the tab in the settings View network settings.