It is not for nothing that Zyxel products are considered one of the best. Their Keenetic 4g series routers are no exception. The router can be used in cases where it is not technically possible to connect wires from the provider, for example in a country house, and several client devices will use the Internet. This is a full-fledged home center for wired or wireless networks, demonstrating ample capabilities both in terms of configuration and communication quality. Therefore, every owner should be able to and know how to configure a zyxel keenetic 4g router. There are several ways to do this: manually or using the setup wizard. Therefore, we will consider each of them in detail.

How to connect a zyxel keenetic 4g router via a wizard

First of all, you need to make sure that your computer or laptop, or rather their network cards, are configured to receive an IP address automatically via DHCP server. You can verify this in the “Network and Sharing Center” panel Windows management. In different versions operating system the steps will be slightly different:

• Windows XP: "Start" button - "Control Panel" - "Network Connections" - "Connect via local network" - "Properties" - "Internet Protocol TCP/IP" - "Properties".
• Windows 7/8/10: in the search bar type “View network connections", and then "Local Area Connection" - "Properties" - "Internet Protocol Version 4" - "Properties"

In the properties window that opens, select the switches opposite “Obtain an IP address automatically” and “Obtain DNS server address automatically”. All changes are confirmed by pressing the “OK” button.

When the network card is configured, you can connect the router. To do this, you need to take it out of the box, screw on the antennas, connect an external 3G or LTE modem, plug it into a power outlet and connect it with a patch cord (included) to the computer. The computer will automatically receive an address approximately like 192.168.1.X, where X is any number from 2 to 254. The router has an address of 192.168.1.1.

Configuring the zyxel keenetic 4g router in wizard mode is carried out using the CD included with the kit. We insert the disk into the drive and wait until the autorun program starts or launch it yourself through Explorer. After this we perform the following steps:

1. In the program window, select the “Zyxel NetFriend Quick Setup” menu item.
2. The utility begins collecting data by polling the equipment. This will take some time.
3. The next window will display information about the detected modem.
4. A country is selected from the list of proposed ones.
5. In the next window, select your mobile network provider.
6. It is proposed to use the DNS filter of Yandex servers to increase connection security. This is done at the discretion of the client, and you can skip this point.
7. Finally, look at the information received and click the “Go online” button. The manufacturer's company page will automatically open in the default browser installed on the system.

At this point, the zyxel keenetic 4g router can be considered configured; you can disconnect the wire from the computer and connect via WiFi. The access point name (SSID) and password are located at the bottom of the router. Leaving the rest of the default settings is strictly not recommended from a security point of view, so after working with the wizard, it is advisable to click on the “Web Configurator” button and make some changes manually.

How to configure a zyxel keenetic 4g router manually

To configure the router manually, you can use any of the browsers that opens the page at http://192.168.1.1 or my.keenetic.net. During the page loading process, authorization is performed. The username and password you need to enter are written below. Once access is granted and the page is opened, an unprepared user may get a little confused by the mass of tabs and options. The entire interface is in Russian, the information is strictly structured, and it’s not very difficult to understand. Let's try to figure out how to connect the zyxel keenetic 4g router to the Internet without using the settings wizard. All settings for accessing the Internet are made in the tab of the same name, but you must first select the operating mode of the device. Now, in order, how the setup process is performed step by step:

1. In the “System - Operating mode” section, the required operating mode of the device is set. You can choose to work via the provider’s Ethernet cable or via an external 3G or LTE modem.
2. Go to the “Settings - Connection” section, where you select manual or automatic address assignment, whether there is MAC filtering and other parameters, according to the provider’s rules.
3. The “Authorization” tab specifies the access protocol and authorization parameters on the provider’s server. Each provider has its own options for creating a connection, for example, for Rostelecom it is PPPoE, for Beeline it is L2TP, etc. for each case you need to clarify the information with the support service. The following fields must be filled in: server address, username and password. The remaining data is selected according to the provider's instructions.

These steps apply to a wired connection or if your service provider mobile internet not listed. To work with external USB With a modem, configuration is even simpler. In the “3G Modem” section, select a service provider from the drop-down list, fill in the fields “ Phone number", provider APN, name and password for authorization.

After entering the data, you will be connected to the Internet. If everything is done correctly, then after successful authorization, a green indicator in the form of a globe icon will light up on the router. You can additionally diagnose the connection in the “System - Diagnostics” section using the built-in ping or nslookup commands.

The next final part is about how to configure the zyxel keenetic 4g wifi router to work wireless network. For this purpose there is a section “ WiFi network" In the “Connection” sub-item, the wireless network is enabled, its name (SSID), operating mode using 802.11 protocols, and radio frequency channel are indicated. The next step is setting security parameters on the appropriate tab. Here you select the encryption type (select the maximum WPA2) and the password for the connection. It is advisable to make the password more complex, using uppercase, lowercase letters, and numbers. After entering, click the “Apply” button to turn on the network.

In this article I will talk in detail about the third generation Zyxel Keenetic 4G and show you step by step how to set up the Internet, Wi-Fi and update the firmware. Even based on the name, the main task of this router is clear - distributing 3G/4G Internet. In addition, of course, it supports various Internet protocols - PPPoE, L2TP, PPtP, but in most cases it is purchased specifically for 3G/4G modems. This router uses 5 LAN connectors with speeds up to 100 Mbit/s, there are two Wi-Fi antennas of 3 dBi each, Wi-Fi speeds up to 300 Mbit/s. And of course, there is a USB 2.0 connector, which, due to weak hardware, supports only one function - working with 3G/4G modems. Although there is no particular point in adding functionality, because USB port one and most likely it will be occupied by a modem.

What is the difference between Zyxel Keenetic 4G II and Zyxel Keenetic 4G III? This is probably the first question that interests many. Its main difference is the presence of a wireless network of 300 Mbit/s versus 150 Mbit/s and Wi-Fi antennas became a little more powerful - 3 dBi versus 2 dBi for the second version of Zixel Kinetic 4G. What does this give?! - more reliable reception and a larger range of the wireless network. This is especially important if you use 3G/4G Internet, since the speed of mobile Internet is very sensitive to the signal level of the Wi-Fi network.

In this article I will describe step by step how:

Specifications:

Parameter	Meaning
CPU	MT7620N 580 MHz
RAM	64 MB SDRAM
Flash memory	8 MB
Wi-Fi network speed 2.4 GHz, Mbit/s	300
Ethernet ports	5 x 100 Mbit/s
Antennas	2x 3 dBi
USB ports	1x USB 2.0
Device dimensions excluding antenna, W x D x H, mm	140 x 110 x 30

1) Internet center Zyxel Keenetic 4G III;
2) Power supply;
3) Patch cord;
4) USB extension cable;
5) Instructions and other waste paper.

From assessing its capabilities and technical characteristics, I suggest moving on to the settings. But first, turn on the router to a 220V network, press the power button on the back wall. Connect one end of the network cable (included in the kit) to any LAN connector on the router (yellow connectors), and the other end to a computer or laptop.

On your computer laptop, set automatic retrieval of network settings . Then open any browser (Chrome, IE, Opera, Yandex), the router web interface should open, if this does not happen, enter in the address bar 192.168.1.1 . If you are setting up for the first time or you reset settings to factory settings , a page will open with the choice to go to the Web interface or perform Quick setup.

Quick setup of Zyxel Keenetic 4G III.

Click the "Quick Setup" button.

a) A 3G or 4G modem is connected to the router.

A window will open indicating that the modem has been detected. This example uses a universal modem with online store NET-WELL.RU .

After this, the router will check if there are firmware updates, and if there are any, it will offer to update. Click the "Update" button.

After this, a window with general information will open. For further configuration, click "Web Configurator".

b) The provider’s network cable is connected to Zixel Kinetic 4G.

An information window will open indicating that an Ethernet cable is connected to the WAN port.

The next step will ask you to select the country where you will use the router.

Select your provider from the list.

Enter the login and password that the provider gave you, it is specified in the contract.

If you have provided the correct information, you will be prompted to update the firmware, click the "Update" button.

Then choose whether to enable Yandex DNS and click "Next".

At the end of the setup you will receive general information about your connection. In this example, the provider uses Dynamic IP.

For further configuration, click the "Web configuration" button.

Setting a password on the web interface.

After a quick setup, the router will prompt you to create and enter a password for the web interface. We recommend using a complex password consisting of numbers, letters and special characters (“No?*”). This password is only needed to connect to the web interface, it has nothing to do with the wireless network.

After this, the router will prompt you to enter the username and password that you just came up with.

As a result, you will be taken to the main menu of the Zyxel Internet Center.

Manual Internet setup.

You can set up the Internet not only using Quick Setup, but also manually. To do this, go to the web interface, open the "Internet" menu, go to the tab of the protocol that your provider uses and click "Add connection".

For example, to set up Beeline Internet, you need to fill in the following fields:

Description - enter a custom name,
Type (protocol) - L2TP
Username - enter data from the agreement with the provider
Password - enter the password specified in the agreement.
Server address - tp.internet.beeline.ru

To set up Rostelecom Internet, fill in the following fields:

Description - arbitrary name
Type (protocol) - PPPoE
Username - use from the agreement with the provider
Password - information in the agreement with the provider

A few minutes after you click the "Apply" button, your Internet will work.

Zyxel Keenetic 4G III firmware update.

Video review of the Zyxel firmware update.

Firmware update, very important step in providing more stable and fast work router. From time to time, and especially if your router malfunctions or does not “see” the 3G/4G modem, you need to update the firmware on it. There are two ways to do this:

1) Semi-automatic update;

2) Manual update.

Firmware update in a semi-automatic way.

This method implies that when you specify the appropriate commands to the router, it will find, download and install the firmware update, provided that there is access to the Internet.

Go to the web interface and click the "System" menu, "Update" tab.

Select those components that you would like to update, you can leave everything as default since the main components are already selected. Scroll to the bottom of the page and click the "Update" button.

Zixel Kinetic 4G will find and install the update itself, you just need to wait a few minutes.

Manual firmware update.

This method is convenient if your router does not have Internet access, but there is a need to update. This happens if the router “does not see” the 3G/4G modem. In this case, you need to download the firmware file to your computer/laptop and update the router firmware from it.

First, look at what software version is installed on the router; to do this, go to the System Monitor menu and pay attention to the line “NDMS Version...”.

Then go to the official Zyxel website, go to the "Support" tab and if there is a more updated firmware there, download it and unzip the archive.

After that on web interface router, open the "System" menu, select the "Files" - "firmware" tab and specify the path to the unzipped file with the firmware. Click the "Replace" button.

In the next window, confirm replacing the firmware file.

After a few minutes of waiting, you will install new version firmware.

Setting up a Wi-Fi network on Zyxel Keenetic 4G III.

When purchasing an Internet center, a wireless Wi-Fi network is already configured; the network name and password are indicated on the router sticker.

If you want to change the network name or password, go to the router’s web interface, open the “Wi-Fi Network” menu and in the “2.4 GHz Access Point” tab, in the “Network Name” field, specify the name under which all devices will see your wireless network, and in the “Network key” line, enter the password. We recommend using a password with letters, numbers and special characters (*:"!), this will protect your network from penetration by neighbors.

Zyxel Keenetic 4G III setup video.

Bottom line.

In general, the Zyxel Keenetic 4G III router is a worthy representative of its family and is suitable for an undemanding consumer. If you use 2-5 devices and access only the Internet from them, without transferring large data within the network, then this router will suit you well.

Anyone who is lucky enough to own one should know how to configure the Zyxel Keenetic 4G router, which is one of the most prominent representatives of its class. On this moment Finding a suitable Wi-Fi router that works with VLAN (802.1Q) seems to be quite a difficult task.

Zyxel Keenetic 4G works on both 3G and 4G network waves.

The Zyxel Keenetic 4G router is ready to work on both 3G and 4G cellular network waves, as its name suggests. Thanks to the built-in antenna (5 dBi), the connection can reach speeds of up to 150 Mbit/s when operating in the IEEE 802.11n standard. Don’t forget about the ability to connect via a dedicated Ethernet line (up to 80 Mbit/s). Support for the technology of simultaneous operation through several types of connections – Link Duo – also adds advantages. A huge advantage of this router is its hardware support for Internet television – TVport. The SPI firewall for protection against external attacks is a common solution for Zixel when developing its products.

It is worth noting the successful software. For example, unlike most similar models from other manufacturers, you do not need to reboot the router to save the changes made.

Thus, the router is perfect for Internet surfing, downloading and working with media content, and watching high-quality IP television.

Setting up an Internet connection

The Zyxel Keenetic 4G router is configured in two ways: automatically using the official NetFriend program or manually through the web interface. Let's consider the last option.

To connect, the router will need to connect the following connectors with cables:

• “router” and “power outlet”;
• “Internet cable” and “WAN connector”;
• “PC network card” and “patch cord”, “LAN connector”.

Further actions will be carried out through the main menu of the device..168.1.1. In the authorization form that appears, enter the word admin in the “Username” field, and “1234” in the “Password”. This data is included in the firmware by default. If everything is done correctly, the “System Monitor of the Keenetic 4G Internet Center” window will open.

Open the “System” tab, and in it the “Operation Mode” option. Check the box next to “Connect via a dedicated Ethernet line.” Save these changes. To further configure the router, follow the selected path “Internet” - “Authorization” and check the box “Authorization in the provider’s network using the 802.1x protocol.”

A new window will appear in which you should enter the following data:

• “Verification method” – EAP-MD5;
• “User name” and “Code word” – enter the appropriate data from the agreement with the Internet provider.

After saving, the changes will take effect.

Checking your connection to the World Wide Web

Open the Monitor window. Information about the connection should also appear there in the “Internet Connection” column. The corresponding LED indication also serves as confirmation that the installation was successful.

Another option for a more detailed analysis of the connection requires opening the “System” - “Diagnostics” tabs, where the following commands must be entered in the field: ping and nslookup.

Setting up a Wi-Fi connection

One of the main functions of any router is to create and stable work Wi-Fi networks.

If you follow the following algorithm, setting up a router to distribute a wireless connection will be much easier.

In the device’s web interface, open the “Connection” tab in the “Wi-Fi Network” window. In the “Basic wireless network settings” menu, set the following parameters:

• "Enable dot wireless access" and "Enable Wi-Fi Multimedia Mode (WMM)" - check the box;
• “Network name” - indicates the so-called SSID - an identifier that determines the name of the access point;
• “Hide SSID” – uncheck or uncheck. At the same time, any user within the signal coverage area will be able to see this network;
• “Communication standard” – 802.11g/n;
• “Channel” – “Auto select”.

When manually setting the last item, selecting channel No. 6 is undesirable due to possible problems with a signal. After setting the data, click on the “Apply” button.

Setting up connection security and updating software

How to configure the Zyxel Keenetic 4G router so that the Internet connection is maximally protected from unauthorized access?

Open the "Security" tab in the "WiFi Network" section. After selecting the “Wi-Fi Security Settings” option, set the following values:

• “Authentication” – WPA-PSK/WPA2-PSK;
• “Protection type” – TKIP/AES;
• “Network key format” – ASCII;
• “Network key” – enter the desired password for the future Wi-Fi network.

The limitations are the impossibility of using the Cyrillic alphabet and the need to use at least 8 characters. After saving the changes, they will take effect.

For improved operation of the router, you need to update the software to the latest version..ru/support/download/product/1288. Having unpacked the archive with the firmware, open the “System” tab and in the “Firmware” window click the “Browse” button. Having selected the bin file with the software, click “Update”. It will take about 5 minutes for the router to complete the update.

http://site/

Now you know everything about how to properly configure a 4G router!

The equipment of the manufacturer ZyXEL is used by the Yota operator. In the line of routers, Keenetic 4G III is a device specifically designed for connecting to 3G/4G networks. It combines the capabilities of shared access to high-speed Internet, obtained both via FTTx cable lines and by connecting external USB modems. IPTV supported. Setting up the ZyXEL Keenetic 4G III router for Yota takes this versatility into account.

To connect the router, there are connectors and buttons on its surface. There is a socket on the rear panel into which a 12V 1A DC power plug is inserted. Nearby is a button to turn on the product. 4 RJ-45 connectors (LAN1-LAN4) “Home network” are used to connect wired network subscribers via an Ethernet cable. Another 1 RJ-45 (WAN) “Internet” connector is used to receive provider services - Internet via cable.

There is a USB connector on the left side of the product. It supports 3G/4G modems. Nearby there is a “Reset” button to reboot the router and return the current settings to the basic values. A Wi-Fi wireless network control button is available on the top surface. Its action is determined by the settings available in the router interface. By default, the duration of the press determines whether to turn on/off WPS mode and Wi-Fi network.

Preparing to connect ZyXEL Keenetic 4G

For the network being created to work correctly, you must first configure the network card of the computer or laptop that is used to configure the router. You need to connect the router with a cable from any connector of the LAN group of your home network to the PC’s network card.

In the right corner of the PC taskbar, you need to click on the Internet connection symbol and go to “Network and Sharing Center”. After selecting "Change adapter settings" you will be taken to the network connections page.

You need to select the PC you are using and right-click to open it context menu. In it you need to select “Properties” and in the new window find Internet Protocol version 4 (TCP/IPv4). In its “Properties” tab, check the box for obtaining an IP address and DNS server address automatically and click “OK”. After this setting network card finished.

Setup via the installation wizard

The router manufacturer recommends first resetting the settings to factory settings. This is done by pressing and holding the Reset button (recessed) for at least 10 seconds. After this, the reinstallation cycle starts, which can be observed by the indicators on the front panel lighting up and going out. It will end in 30-40 seconds.

On a PC, you need to enter 192.168.1.1 into the address bar of the browser you are using and press “Enter” on the keyboard. In the authorization window that appears, you must fill in the fields, indicating the values ​​admin/admin (1234). After entering the "Enter" command, the start page router interface. At the bottom there are prompts for “Quick Setup” and “Web Configurator”. After selecting the "Quick Setup" tab, the installation wizard starts and quick setup Internet connection.

On the wizard pages you need to select the country of use, region, provider. After selecting an operator, a window will open in which you need to write down the username and password from the agreement concluded with him. If the provider is not in the proposed list, you must check the box “My provider is not in the list” and “Continue.”

Whether or not there is a binding to the MAC address, you need to find out from the operator. If it exists, then check the box and, after moving to the next page, enter the physical address of the router. If there is no binding, then the item “My provider does not register MAC addresses” is checked.

After this, you will be prompted to update the device firmware. The update is performed automatically after clicking on the tab. The next page resolves the issue of enabling the service. safe internet Yandex DNS. After making a decision and continuing, you go to the final page of the installation wizard with basic Internet parameters. At the bottom there are the “Login to the Internet” and “Web Configurator” tabs. By clicking on the first one, you can view browser pages.

How to configure the ZyXEL Keenetic 4G router for Yota: step-by-step setting of parameters for the provider

After clicking on the “Web Configurator” tab, the router prompts you to change the Internet center administrator password. After recording, confirming and applying it, the authorization tab will open, where you need to enter the user name - admin - and a new created administrator password in the field. Clicking “Login” takes you to the main page of the System Monitor.

The tabs at the top of the page refer to the currently clicked icon in the lower field of the interface. The "System" tab of the main page displays information about the current Internet connection, information about the system and availability of updates, and the state of the point Wi-Fi access, connecting the USB modem and its name, the status of the LAN and WAN network connectors.

When you click on the "Internet" icon (globe), tabs of the connection protocol type will become available. You must choose the one specified in the contract. After clicking on the desired tab, a window will open asking you to “Add a connection.” Clicking on it takes you to the connection settings page. It must indicate all the contract data, if the operator has provided it. The Internet access protocol l2tp is used by Beeline. Rostelecom, Megafon are used in different regions different types connections.

After clicking on the “Apply” stencil, the Internet will become available. You can verify this by the indicator on the front panel of the router. When the provider cable is disconnected from the WAN connector, the indicator will go out. The connection will be lost on the "System" and "Internet" pages. When connecting the modem to the ZyXEL Keenetic 4G III USB connector Yota setup No USB modem required. The router will detect it and the mobile Internet will automatically connect. Information about this will appear on the router interface pages. The indicator will light up again.

The router supports the Internet with more than 70 modems. For many of them (including Yota) there are universal firmwares.

By default, Wi-Fi is configured on the router. The network name and access password are indicated on the device label. For manual settings You need to click on the wireless network icon in the web interface and select the “Access Point” tab. In it you can change the existing name of the network and come up with an individual password that you need to remember. The remaining security protection settings can be left unchanged. The entered data should be saved by clicking on the “Apply” stencil. The front panel indicator will show the status of the wireless network.

What to do if the router does not see the USB modem

First, you should make sure that the modem receives 3G/4G mobile Internet when you connect it to the USB connector of your computer or laptop. If the modem works without problems when paired with a computer, but the router does not see the modem, then you need to make sure that there are no errors when setting up the router. To do this, you need to reset its settings to factory values.

If Yota disconnects from the Internet through the ZyXEL router, then the modem settings may be incompatible with the router. You can find out about this on the website my.keenetic.net in the “Support” section, having previously received information about the full designation of the router model. Here you can find the versions of the optimal drivers and latest firmware. Installing a USB application allows you to control the required positive balance of the card.

In the event of a malfunction after a period of normal operation (the ZyXEL router has stopped working, does not see Yota modem) you need to update the router firmware. Her latest version you need to download and save as a file on your computer. In the "System" section, select the "Files" tab and expand Firmware file. It requires replacing the existing value with a new one saved on the computer. The process ends with a reboot of the router. If all these steps do not help, then the question is about replacing the modem or router.

Currently it is widespread wireless connection to the Internet using external USB modems via cellular networks 3G and 4G. Keenetic 4G is an Internet center that allows you to constantly use the World Wide Web. Thanks to Keenetic, a user can simultaneously connect several of their home or office PCs and laptops into a network, and activate simultaneous Internet access for them from any location that falls under the coverage area of ​​a mobile operator.

To do this, you only need one USB modem. Built-in access point wireless wifi A network with a powerful antenna allows you to connect laptops, tablets and other network devices that support the IEEE 802.11n standard (operating speed 150 Mbit/s) to the Internet center. If necessary, Keenetic 4G can also be connected to an Ethernet line, which operates at a speed not exceeding 80 Mbit/s. This speed is enough to easily use any sites on the Internet, social networks, receive IP television and use local servers of providers.

The ZyXEL Keenetic 4G router has passed special certification under the “Yota Ready” program. In order for the Yota modem to start working, you just need to connect it to the router and the entire home network will automatically gain access to the 4G Internet.

How to connect and configure Keenetic 4G yourself

And so let's get started. Your computer is already connected to the router. We launch a web browser on it. Next we proceed step by step:

It should be noted that Keenetic 4G can work with more than 25 models of USB modems. It does not require the installation of specific firmware or additional adaptation. As mentioned above, to work, you just need to connect the modem and select the operator you need from the list. After this, users of all devices that are connected to Keenetic 4G will be able to freely access the Internet not only via Ethernet, but also via Wi-Fi. In order to organize a home network, you can use the built-in wireless access point.

Connection via dedicated Ethernet line

Using Keenetic 4G, the user has the opportunity to access the World Wide Web via a dedicated Ethernet line. Internet speed over a dedicated line reaches 100 Mbit/sec. This speed allows you to:

• use file-sharing networks and information and entertainment resources;
• receive IP television, and quite high definition;
• use local servers of providers.

ZyXEL Keenetic 4G is in no way inferior to routers or wireless routers in its capabilities, and some of them are superior. Keenetic 4G, in addition, can be connected to VLAN-based services that operate according to the IEEE 802.1Q standard. ZyXEL Link Duo technology allows all devices on your home network to simultaneously access not only the World Wide Web, but also the regional network via a dedicated line. Thanks to TVport technology, the user has the opportunity to receive various IPTV channels. In the summer, thanks to the Keenetic 4G Internet center, you can provide yourself mobile communications at your dacha, and in the winter, using a dedicated line - in a city apartment.

How to connect a laptop via Wi-Fi

In order to connect a laptop via Wi-Fi, we will use WPS technology for this.

Not all of us are experts in technologies such as Wi-Fi or Ethernet. Many people worry that they won’t be able to connect and make the necessary settings themselves. In fact, there is nothing complicated here. Even if this is your first time setting up and connecting the Internet and IP-TV on your own, you will not need the help of specialists. Any New user, regardless of his level of knowledge, will be able to configure ZyXEL Keenetic 4G, thanks to the program ZyXEL NetFriend and a new, convenient and, moreover, web configurator in Russian.

Review