How to connect bluetooth on a Windows 7 laptop. How to enable Bluetooth on a laptop. Solving possible problems

Bluetooth, as a medium for transmitting large amounts of data, is practically not used due to the widespread use of Wi-Fi.

However, this technology is still widely used to connect wireless mice and headsets.

In today's review we will talk about turning on Bluetooth on a laptop.

At the very beginning, we should mention the fact that for the normal functioning of the Bluetooth wireless adapter, you should take care of installing the correct drivers .

The fact is that after reinstallation, the operating system installs the drivers automatically and often after installing such drivers, the device may not work correctly.

Therefore, you should take care of this and download them from the official website of the equipment manufacturer.

Setting up Bluetooth in Windows 7

Setting up Bluetooth in Windows 8

To enable Bluetooth in Windows 8, you must:

Move the mouse cursor to one of the corners of the display and open the Charms panel, then click “Options”.
Select “Change computer settings”, and then select “Wireless network”.
In the wireless modules management menu, you can enable wireless adapters, including Bluetooth.

In order for devices to be able to connect via Bluetooth, go to the “Devices” menu and click “Add device”.

If the above method did not help, try going to the device manager.

To do this, press the Win + R key combination and enter the command “devmgmt.msc” without quotes and click “OK”.

In the menu that opens, go to the properties of the adapter and look at the warnings for errors.

Go to the “Driver” tab and pay attention to the driver developer (supplier) and development date.

As shown in the example, the driver is 9 years old and it is advisable to install a newer version from the manufacturer.

Setting up Bluetooth in Windows 8.1

To enable Bluetooth in Windows 8.1, you must:

Move the mouse cursor to one of the corners of the display and open the Charms panel, then click “Settings” and “Change computer settings.”
Next, go to the “Computer and Devices” menu, and then go to the “Bluetooth” submenu.
After selecting this menu, the wireless module will automatically start searching for available Bluetooth devices, also automatically making the laptop visible to other devices.

Hardware enable Bluetooth on a laptop

On at the moment Most laptop manufacturers do not make a separate button for turning on bluetooh and Wi-Fi, but combine the activation of both wireless modules with one button, or rather with the key combination Fn + one of function keys from F1 to A12.

By paying attention to the function (F1 to F12) keys of your laptop, you can find a wireless connection icon on one of them.

Almost all laptops have light indicators for the operation of wireless modules, and a lit indicator indicates that the adapter is turned on, otherwise there is no backlight.

Operating indicators are placed by laptop manufacturers, usually on one of the sides or front of the laptop.

Quite rarely, indicators are located directly next to the touchpad or on the laptop display case.

Some HP laptop models have an indicator light built into the keyboard button (F12).

Below is a list of keyboard shortcuts that enable/disable the Bluetooth module for some laptops.

Acer: Fn+F3

Asus, Dell, Gigabyte: Fn + F2

Fujitsu: Fn+F5

How to easily enable and configure Bluetooth on a laptop

How to turn on Bluetooth on Asus laptop, HP, Dell, Acer

In this article I will try to explain in detail what to do in a situation when you have a desktop computer and need to connect some device to it via Bluetooth. For example: wireless headphones, mouse, keyboard, speaker system, joystick, phone, tablet, etc. There are a lot of such devices, and now there’s no way without Bluetooth on a computer. In addition, such a connection allows us to get rid of large quantity wires

As you probably already know, in ordinary desktop computers (in system units) There is usually no built-in Bluetooth. With two exceptions: an internal PCI receiver is installed ( external USB), or you have a cool motherboard with a built-in wireless module. But there are very few of them, so it’s unlikely. You can see the characteristics of your motherboard. Well, if your PC had Bluetooth, you would most likely already know about it. There would be a corresponding tray icon, or an adapter in the device manager (possibly as an unknown device - when the driver is not installed).

To connect devices to your computer via Bluetooth, you need to buy and install a Bluetooth adapter into your computer. Typically, these are adapters that plug into a USB port. I have one, model Grand-X BT40G. It looks like this:

There are also PCI adapters; they are installed inside the system unit case. But they are not very popular. I will not dwell on the choice of adapter, as I wrote about this in a separate article. There are a lot of them on the market. There are both cheap and expensive models. You can generally order from China for three kopecks. But if you plan to use it frequently wireless connection, connect some serious devices via Bluetooth, such as headphones, joysticks, then it is better not to skimp on the adapter.

If you already have an adapter, we’ll configure it now. If not, read the article at the link above, choose, buy and return to this page.

I will divide this article into two parts: first, I will show you how to connect a Bluetooth adapter to a computer on Windows 10, configure it, if necessary, find and install the driver, and connect some device. And in the second part we will do all this on a PC with installed Windows 7.

I don't have the opportunity to demonstrate all this on Windows 8 and Windows 8.1 right now, but from an older and new version this operating system (I'll enter seven and ten) there aren't many differences.

Anyway, First we connect the Bluetooth adapter to the computer.

After that, we move on to installing drivers and setting up.

Bluetooth on PC with Windows 10: connection, drivers, setup

Windows 10 is generally a cool system in this regard. Why? Yes, because in almost all cases, no matter what kind of adapter you have, after connecting, all drivers will be installed automatically, and a blue Bluetooth icon will appear in the tray. And you can immediately connect the necessary devices.

In the device manager, I immediately saw the “Bluetooth” section and the adapter itself. If the adapter is not recognized and appears as an unknown device (other device), then you will have to install the drivers manually. You can see how to do this using Windows 7 as an example at the end of this article.

And to connect headphones, gamepad, mouse, keyboard, or other Bluetooth device to your computer, go to “Settings” in the “Devices” section. Or by clicking on the tray icon and selecting "Add Bluetooth device".

Click on "Add Bluetooth or other device".

Next, select "Bluetooth". The computer will begin searching for available devices to connect to. Our device must be in search mode. In my case, these are headphones. There is a separate button there. When they are in connection mode, the indicator blinks on them. When the computer detects our device, we simply select it and connect.

And if you want to connect a smartphone or tablet to your computer, then on the mobile device itself you will need to confirm the connection (pairing).

This way you can connect absolutely any Bluetooth device.

Setting up a Bluetooth adapter in Windows 7 and connecting devices to a computer

In Windows XP, Windows 7 and Windows 8, after connecting the adapter, the driver will most likely have to be installed automatically. But not always. In my case, Windows 7 itself installed the driver on my Grand-X BT40G USB Bluetooth adapter. The Bluetooth icon immediately appeared.

Here is a screenshot from Device Manager.

If the system could not recognize the device and install it, the icon did not appear, then you need to install the driver. I will show you how to do this below. Now let's connect some device via Bluetooth to a computer with installed Windows 7.

Click on the icon and select "Add device".

A window will open that will display all devices found by the computer. Which are currently located near the computer and are available for connection. Select our device and the connection process will begin. I connected again Bluetooth headset (headphones with microphone). On which you can talk on Skype.

When the message "This device has been added to your computer" appears, you can use it. Wireless mice (via Bluetooth), keyboards, phones and other devices are connected in the same way.

In the case of headphones, you may also need to set them as the default playback device. This can be done in the playback device settings (by right-clicking on the sound icon in the tray).

Driver for Bluetooth adapter: search and installation

It doesn’t even matter what system is installed on your computer, it can be either Windows XP or Windows 10. But if it could not automatically configure the connected Bluetooth adapter, then we will have to manually search and install required driver. There are at least three ways:

When the system cannot install a driver for a device, it is located in the device manager in the “Other devices” section with a yellow icon. It’s hard to say how exactly your Bluetooth adapter will be displayed (called) there. If you haven’t had any unknown devices there before, then identifying it won’t be difficult (there will be only one).

I have something like a CSR 8510 A10 (looks like this is the chip on which the adapter is built). Right-click on this device and select "Properties". Next, go to the “Details” tab, put “Equipment ID” in the drop-down menu and copy the first line.

Opening the site DevID.info, paste the copied line into the search bar and delete everything unnecessary so that only the VID and PID values remain. You can see what value I had initially (screenshot above), and what I searched for (screenshot below).

First, let's download the first driver that appears in the search results. You need to click on the floppy disk icon. Please note the operating system for which this driver is suitable.

We go through the “I am not a robot” check, click on the link and save the archive with the driver.

If there isn't installation file, but just a set of folders and some files, then right-click on the unknown device in Device Manager, select “Update driver” – “Search for drivers on your computer” and specify the path to the folder with drivers. If the driver is not found and installed, try downloading another one.

I really hope that the article was useful to you, and that you still added Bluetooth to your computer and were able to connect the necessary devices. And I didn’t waste half a day in vain :)

Hello, Dear readers of the public-pk blog. In this article I will tell you how to install bluetooth on your computer. Despite the emergence of new interfaces, the question of how to install Bluetooth on a computer does not lose its relevance. Therefore, we read the article to the end.

First you need to check the presence of the Bluetooth module on your computer.

The first indicator of the presence of bluetooth will be a sticker on the front side of the system unit or monitor. As for laptops, the latest models mostly have such an interface.

On a desktop PC, the presence of Bluetooth will also be indicated on the motherboard. But for this purpose, opening the system unit (besides, if the computer is still under warranty) would be stupid.

Here is a harmless way to check for bluetooth on your PC.

Open context menu“My Computer” shortcut (right-click on it)
- "Properties"
– “Hardware” (if Windows XP is installed)
- "Device Manager".

Next, look for Bluetooth in the list that appears. If it is not in the list, it is not available on the PC. In this case, you can simply purchase an additional USB Bluetooth adapter and the lack of Bluetooth on your computer will be compensated.

How to install bluetooth on a computer?

Now let’s figure out how to install a Bluetooth adapter on your computer yourself.

Install the drivers (they come with the device on the disk).
Connect the adapter via a USB connector.

The device is detected by the computer automatically. If you don't have drivers, you can use the BlueSoleil utility. Download it from the Internet and install it on your PC. So, the adapter has been installed, now you need to turn it on correctly. How to do this?

Usually, after installing Bluetooth, an icon in the form of a blue tooth appears on the taskbar. The device is controlled through this icon. If after installation this image does not appear, then do the following:

“Start” - “My Computer” - “Control Panel”.
Find Bluetooth controls in the list and turn on the device.

Everything is much simpler on a laptop. To control Bluetooth there is a separate button on the device body.

Economy versions of laptops may contain only a button, while the adapter itself may be missing. After it has become clear how to install a Bluetooth adapter on your computer yourself, let’s move on to the specifics of setting it up.

Run a scan to identify devices within the module's range.
- "Control Panel"
- “Devices and Printers”
- “Add device”.

Upon completion of the scanning stage, you will see a list of found devices. Select the device you want to connect to. Basically, that's all.

Note on topic! I have a couple more articles about bluetooth in stock, so I invite you to read it. I told you where to download bluetooth on a laptop, and also told you how to connect a bluetooth headset to your phone. There is also an article on how to turn on Bluetooth on a laptop and computer.

With UV. Evgeny Kryzhanovsky

public-pc.com

What is Bluetooth for windows 7? Correct installation, configuration and use

Greetings, dear readers, Trishkin Denis is here again.

What is it and what is it used for? (to contents)

The technology is designed to transfer information from one point to another using special modules. It is worth noting that this may be a process familiar to us - copying music or images (say, from a computer to a smartphone). Or transmitting sound to the headset and back. How to turn on Bluetooth and what is needed for this, we will try to figure it out further.

Connection(to contents)

In most cases, stationary system units They do not have similar technology, when laptops are the other way around - most often a special module is built inside. In the second case, you just need to turn it on. This is done by the most in different ways, starting from a separate button and ending programmatically.

If it is not there, you need to separately purchase a module that is connected via USB port.

Usually for such elements in operating system the necessary software is located. But sometimes you need to install it yourself. A Bluetooth driver for any laptop model can be found on the Internet. Programs for system units are also located there. The main thing is to indicate the OS version, manufacturer and model of the connected device.

In order to find out whether you need to search for programs, you need to make several movements:

Installation(to contents)

This point in principle does not cause any problems. So how do you install Bluetooth? It's simple - you just need the device itself and suitable drivers. When choosing the latter, you must know your version of the operating system and its bit depth.

Sometimes using software from previous versions of the shell helps. For example, there are situations when drivers from the seventh version are quite suitable for Windows 8. It depends on the module manufacturer, motherboard and some other indicators. The main thing is to just remember this during installation. Because there are often situations when everything is installed, but the equipment still does not want to work. Then you need to try using another program.

Settings(to contents)

Once everything is functioning properly, you need to configure Bluetooth. Or rather, create a pair between two devices - a computer and a smartphone (tablet, speakers and much more). To do this, you need to enable the corresponding component on both gadgets and start searching. Next, prompts should appear on the screens of both devices, following which you can easily create a pair and then transfer information.

Important! The two systems must be configured to be detected by other equipment.

If we talk about connecting a Bluetooth headset, the process is basically no different, except that it usually does not have a monitor. To do this, everything is simply done through a computer. It is worth clarifying that sometimes it is necessary mobile device turn it on and off several times (this will help you recognize it faster).

Disconnection(to contents)

After all operations are done, I personally recommend stopping the operation of the corresponding component. This will help avoid unauthorized access by third parties, and on laptops it will even save energy. How to turn off Bluetooth if you haven't started it? It's simple: right-click on the tray icon and select the appropriate item. On laptops this can be done using buttons; how exactly depends on the equipment.

But what to do if the Bluetooth icon disappears? The corresponding program can be found in the same “Control Panel”. We go to the menu and in the settings indicate that the icon is always in the right place.

This component in the system is convenient. There is no need to constantly look for wires and monitor them. You can just turn it on the desired function and that's all. I hope the article helped you.

windwix.ru

Bluetooth on a computer: connection and setup

A fairly common question is how to turn on Bluetooth on a computer. The thing is that there is no button on the keyboard of a stationary personal computer that would turn on the wireless communication module. A laptop is more convenient in this regard. How can you turn it on and off in this case? How to set up bluetooth?

Connection

It should be noted that desktop personal computers do not contain such communication modules in their design by default. How then can I make bluetooth work on my computer? It's very easy: you just need to purchase a separate module and connect it. There are two types of devices:

The first one is connected via a USB port as a flash card. The second one is a little more difficult: you need to open the system unit case and insert the module into the connector on the motherboard. For an untrained user, the first option is preferable. Well, iron lovers will like the second one.

It should be mentioned that the connector into which the communication module is inserted must be PCI type. These connectors are typically found on the bottom half of the motherboard and near the back of the case.

Driver installation

After everything is done, you need to turn on the computer. When the operating system boots, a message should appear indicating that new hardware has been detected. Now you need to insert the disk that should be included with the device.

This disk contains a driver that requires installation for the device to function correctly. Of course, the driver can also be found on the Internet, but to do this you need to know the full name of the device. With a disk everything is much simpler. So, now there is bluetooth on the computer. Next, you can proceed to enable and configure it.

Activating the communication module on a personal computer

As mentioned earlier, on the keyboard desktop computer There is no special button responsible for turning on the Bluetooth adapter. But there are other ways to activate it.

It is noteworthy that by default the adapter will work constantly. So you will probably need to disable it rather than enable it. There are two ways to do this:

through the "Equipment Manager";
through the module settings.

Enable via "Hardware Manager"

For the first method, you first need to press the Win+R key combination. A window will appear where you need to write the command devmgmt.msc in the line and press Enter. The operating system will start necessary tool. Here you need to find a Bluetooth device, which is most likely located among network adapters. Once it is found, you need to right-click on it and select the item responsible for turning it on and off. Bluetooth on the computer will be activated or deactivated.

Enabling through settings

In addition, you can use the adapter on a personal computer directly through its settings. After the drivers are installed, a corresponding icon will appear in the operating system tray (lower right corner on the desktop). If you right-click on it, a menu will open in which you can see several items:

adding a device;
equipment review;
opening parameters;
disabling and enabling the adapter;
removing an icon from the tray.

You just need to select the required action.

Adding a new device

Before you start transferring files or using the wireless connection for anything else, you need to connect the desired equipment to personal computer. How to do this? It's quite simple. First you need to open the adapter settings and check the box that allows detection this computer. In the “Sharing” tab, you need to check the box that allows sending and receiving files.

Now you should enable discovery on the connecting device. How to do this should be described in the instructions for the equipment. Next, right-click on the tray icon again and select “Add device”.

The system will start automatically searching for everything available connections, and then provides a list of them. The user can only select the device he wants to connect. After selection, click the “Next” button. According to step by step instructions the process is completed.

Using a third party program

There are also third-party developments for controlling the Bluetooth module. The Widcomm program is one such tool. This is a simple and reliable utility for remote use of wireless devices. It is compatible with all versions of the Windows operating system and has a Russian-language interface. In addition, it is free, and in terms of capabilities it is not inferior paid analogues. You can also turn the adapter on and off through it. Among the functions:

Work with wireless printers and faxes.
Working with joysticks.
Transfer files to mobile devices.

Users claim that the utility is a very convenient, highly targeted product. The programmers tried to add the latest technological developments, thereby improving the quality wireless communication. In addition, the kit includes all the necessary drivers. Is this program necessary? Bluetooth on a computer will work better with its help, and the user will have more options than using standard tools.

Using the tips above, you can easily connect and set up wireless Bluetooth connectivity on your computer.

fb.ru

How to find, download and install a driver for a laptop’s Bluetooth device

Currently, laptops are sold with a pre-installed operating system and installed drivers.

If you want to reinstall for any reason reason Windows, then to install drivers on devices you will need to determine the type of equipment, model and find drivers on the Internet.

The article will tell you how to find drivers for a wireless bluetooth adapter on Windows 7 or 8 and we will install them using the example of a Hewlett-Packard Pavilion M6 laptop.

In Windows, on the “My Computer” icon, right-click and select “Properties”.

In the window that opens, select “Device Manager.”

And in the “Other devices” section we see equipment for which no driver was installed.

Right-click on the unknown device and select “Properties”.

In the menu that opens, go to the last tab and look at the unique device ID.

Copy the device identification number and paste it into the search bar on the page search engine Google.

In the resulting list of links we find what kind of device we have.

In our case it turned out wireless adapter Broadcom.

Go to the adapter manufacturer’s website and download current version drivers and install them.

In our video, we downloaded the bluetooth driver adapter from the website of the manufacturer Hewlett Packard for the HP Pavilion M6 model.

After installing the drivers, Bluetooth turned on and appeared in the system.

Video instructions on how to find, download and install a driver for a laptop’s Bluetooth device.

Find, download and install drivers for laptop devices, Bratsk, Energetik. tel. 27-01-02

com-service.ru

Downloading and installing the Bluetooth adapter driver for Windows 7

Bluetooth adapters are quite common these days. Using this device, you can connect various accessories and gaming devices (mouse, headset, etc.) to your computer or laptop. In addition, we must not forget about standard function transferring data between a smartphone and a computer. Such adapters are integrated into almost every laptop. On desktop PCs, such equipment is much less common and often appears in the form of an external device. In this lesson we will tell you in detail how to install Bluetooth adapter software for Windows 7 operating systems.

Methods for downloading drivers for a Bluetooth adapter

There are several ways to find and install software for these adapters, as well as any devices in fact. We bring to your attention a number of actions that will help you in this matter. So let's begin.

Method 1: Official website of the motherboard manufacturer

As the name suggests, this method will only help if you have a Bluetooth adapter integrated into the motherboard. Finding out the model of such an adapter can be difficult. And on the websites of the board manufacturer there is usually a section with software for all integrated circuits. But first, let’s find out the model and manufacturer of the motherboard. To do this, perform the following steps.

On this this method completed. Please note that it may be partly useful for owners of external adapters. In this case, you must also go to the manufacturer’s website and use “Search” to find your device model. The manufacturer and model of the equipment are usually indicated on the box or the device itself.

Greetings, dear readers, Trishkin Denis is here again.

Connection( )

In most cases, stationary system units do not have such technology, while laptops do the opposite - most often a special module is built inside. In the second case, you just need to turn it on. This is done in a variety of ways, from a separate button to a programmatic method.

If you don’t have it, you need to separately purchase a module that connects via a USB port.

Typically, the operating system contains the necessary software for such elements. But sometimes you need to install it yourself. A Bluetooth driver for any laptop model can be found on the Internet. Programs for system units are also located there. The main thing is to indicate the OS version, manufacturer and model of the connected device.

In order to find out whether you need to search for programs, you need to make several movements:

Installation( )

This point in principle does not cause any problems. So how do you install Bluetooth? It's simple - you need the device itself and suitable drivers. When choosing the latter, you must know your version of the operating system and its bit depth.

Settings( )

Important! The two systems must be configured to be detected by other equipment.

If we talk about connecting a Bluetooth headset, the process is basically no different, except that it usually does not have a monitor. To do this, everything is simply done through a computer. It’s worth clarifying that sometimes you need to turn your mobile device on and off several times (this will help you recognize it faster).

Shutdown( )

Almost everything modern models laptops are equipped with a Bluetooth module, which opens up the possibility of exchanging information with various gadgets without the use of wires. But the fact is that not all users know how to turn on Bluetooth on a laptop. In this article you will find detailed description solve the problem and you can expand the capabilities of your computer.

Checking the Bluetooth module

First of all, make sure that your PC actually supports Bluetooth. You can do this in several ways:

find a sticker with the corresponding logo on the laptop case;
get acquainted with technical characteristics in your passport or by finding information on the Internet.

If this technology is missing, then, as an option, you can use an external Bluetooth adapter, which is suitable for any laptop model.

Preparing Bluetooth for use

It should be noted that for proper operation of the radio module it is necessary to install official drivers, downloaded from the laptop manufacturer's website. If you updated the operating system, a device driver was automatically installed, which may cause incorrect operation. Therefore, if necessary, reinstall the Bluetooth module driver.

In the case where the official website of the computer manufacturer only has software, designed for more old version OS, the problem is solved by installing in compatibility mode.

It is also worth paying attention to one very important point. On some laptop models there is a complete shutdown service wireless devices, which is activated using function keys (usually Fn+F5). If the radio module is disabled through this service, it will not be possible to activate it programmatically. Be sure to check whether a similar service exists on your PC and what parameters are set in it.

How to enable Bluetooth on a Windows 10 laptop

To activate the radio module in the operating room Windows system 10, just open the notification center, which is located in the lower corner on the right side of the window, and click on the “Bluetooth” button.

How to enable Bluetooth on a Windows 8 laptop

If you have Windows 8 installed on your laptop, do the following to start Bluetooth:

move your mouse pointer over right side screen and in the panel that opens, click “Options”;
select "Change computer settings";
on the right side in the section " Wireless networks» turn on Bluetooth.

In operating system version 8.1, the interface is slightly different, so after selecting the second item, you must go to the “Computer and Devices” section, and then click “Bluetooth”. If everything is done correctly, the radio module will automatically activate and go into device search mode.

How to enable bluetooth on a Windows 7 laptop

On Windows 7, the easiest way to do this is using the corresponding icon located in the notification area. Right-click on this icon and select “Enable Bluetooth function” in the menu that appears.

If the icon is missing, do this:

go to the “Control Panel”;
Click on “Network and Internet”, and then on “Network and Sharing Center”;
Find "Change adapter settings" on the right side;
right-click on “ Network connection Bluetooth" and click "Enable".

28 321 Review