Disabling the Internet welcome. USSD request - what is it? USSD requests and codes. Can I answer calls while my phone is being used for data?

22.11.2018

To clarify the parameters of their tariff plan, subscribers must first clarify its name. This will help you get acquainted with the parameters of room service, for example, via the Internet. How can I find out the tariff plan on Velcom if the documents issued when obtaining a SIM card were lost or the terms of service on the number were repeatedly changed? The operator mentioned earlier offers several options for obtaining information about the conditions under which the subscriber uses communication services. Let's look at how to find out the tariff plan on Velcom in more detail in this article.

Overview of possible options

Before moving on to the main topic of the article, I would like to clarify that the operator has developed several services to inform its subscribers. With their help, you can also find out the Velcom tariff plan:

USSD request(by entering a special request, you can view the data of interest quickly and without additional costs through the USSD service);
call the support line(experienced consultants will answer customer questions and help determine the choice of tariff or additional options);
ISSA service(popular Internet assistant, full name - Internet subscriber service).

Method 1. Contact the support line

Registered subscribers or potential users of the operator’s communication services can contact the support line and ask how to find out what Velcom tariff plan. From the SIM card of an existing subscriber, you can contact the information service by dialing 411. As with calls to the support lines of other telecom operators, there is a voice information system that will help the user obtain the data of interest, without connecting to a specialist.

Method 2. How to find out the Velcom tariff plan (USSD service)

A convenient and functional way is to receive information about your number (this could be balance, tariff name, information about connected services, etc.) via USSD. After sending a short request, the subscriber will have to wait up to two minutes - the response from the operator will arrive immediately (via text message). There are a number of commands that all subscribers should know. To begin with, we present the basic query, which can be the answer to the question discussed in the article.

*141*2*1 # - by sending a similar combination, you can receive in a response message not only the name of the tariff activated on the number from which the command was dialed, but also view your number (a similar function can be quite convenient for new clients who have not yet managed to remember their own number );

Other USSD requests that may be useful to customers

*141*2*3*1# - for Internet users from mobile gadgets, this request will allow you to find out what conditions are currently applied to the number when using the Internet; if you connect to a tariff or option with a subscription fee, the date upon which the money will be debited will also be indicated.
*141*3*4# - for subscribers who have decided to change their tariff plan, this request will allow them to realize their plans.

Method 3. Using the Internet Assistant

How to find out the tariff plan on Velcom if you have the Internet? The web interface of the ISSA service is available on the official website of the Belarusian telecom operator. First, before gaining access to viewing and managing your number, you must register in the system. Detailed information on how this can be done is contained on the main page of the service. Here is a brief overview of the actions that the subscriber will need to perform.

Registration on the service

A subscriber who wishes to gain access to the Internet service and a functional personal account must complete the following steps:

From a mobile gadget in which a SIM card with the desired number is installed, enter the request *141*0#. This command allows you to access the service for setting a password to access the web information service.
Assign and enter a sequence of characters (password) to access the Internet assistant. Of the basic requirements for a password, only one should be highlighted: the number of characters should not be less than five. In this case, the maximum length of the access code cannot exceed ten characters.
Wait a few minutes for the data to be updated in the system and go back to the page for entering authorization data, indicating your number and the password assigned in the previous step.

What features are available in the online customer service?

Those operator clients who are already familiar with the functionality of their personal account will never be faced with the question of how to find out the tariff plan on Velcom. After all, by visiting the personal page of the ISSA service, you can perform any operations with the number, for example:

find out the balance;
view the name and parameters of the tariff plan;
change the tariff;
view the list of current options;
manage connected services: disable and connect them, etc.

Conclusion

How to find out the Velcom tariff plan: by the support line number, visit the web support service for subscribers or use short request services - the client of the previously mentioned operator decides. Previously, we looked at several ways to obtain data. It should be noted that the most effective and less expensive is the USSD functionality: in order to use it, you do not need to connect to the Internet, wait for a specialist to answer on the line, or bother with the voice menu, moving from point to point in the system.

All modern people use mobile communication services from different operators, and each mobile operator has a list of combinations with which you can connect certain services - this is a USSD request. In short, such requests contain numbers and symbols, after entering and sending which some action will be taken. Each is responsible for a separate function, and this article will present all about such combinations.

What are commands for?

USSD request is a kind of option for mobile customers, which is installed along with SMS and is a basic service of any operator. Translated, this abbreviation means “an additional option that has no structure.”

For a clear example, it’s worth understanding how such a combination works:

A mobile customer, for example, wishes to check the balance of a mobile phone using a service code.
On the phone keyboard, first press “*”, and then enter the desired number, the code of which is responsible for checking the balance.
After the numbers, “#” is entered and a call is made to send data to the network.
After a few seconds, balance information is sent to your phone in the form of an SMS or as an interactive menu on the gadget screen.

In addition, a USSD request can not only allow you to check your account status. With its help, you can enable or disable services, switch to another tariff, open the operator’s menu to receive information on mobile communications, and also carry out a lot of other operations.

The benefits of combinations

The USSD request is very convenient to use, because by entering short commands you can quickly receive information, without the need to call the operator or send an SMS. In addition, using combinations, you can obtain the data of interest at any convenient time, 24 hours a day.

Using such codes you can control your mobile phone number. Network clients can send requests to other people to send money or simply call back.

For a more detailed consideration of combinations, you should indicate data for different operators in Russia.

Popular MTS combinations

The very first and most popular command from MTS is *111#. This command is used to open a portal in which each user can manage the tariff and options. If it is difficult to remember other commands, then you only need to remember this one. With its help you can find out everything you need, and even your mobile balance. The request replaces your personal account on the website and can be used in any region and even country. MTS USSD requests are not charged, which is very convenient.

If there are characters on your phone in messages and other parts of documents that cannot be read, then you need to enter *111*6*1#. Below are the most popular codes from the MTS Russian operator:

Account verification is carried out by dialing the combination *100#.
You can see what the funds were withdrawn for during the last 5 actions using the command *145#.
You can quickly find out your mobile number using the code *111*10#.
To check active paid options, use *111*11#.
To check the current tariff, use *111*12#.
You can find out about the remaining package offers by entering *217#.
You can top up your balance using a bank card by requesting *115#.

This is only a small number of requests that the operator has. All details can be found on the website, and this article describes only the most common and necessary ones. Information on requests for tariff plans will be provided in the description of the tariff itself selected by the subscriber.

Velcom teams

Through a USSD request from Velcom, subscribers can manage mobile communications independently. Thus, to check your balance information, you need to dial *100# on your phone keypad. If the user needs to change the payment system, the code *145# is used. These are the basic codes for managing your money.

You can also manage tariffs. To activate a particular tariff plan, there is a dedicated team. Now we suggest you familiarize yourself with other methods of plan management. To check the active tariff you need to dial *141*2*1#, and to find out the mobile number, dial *147#. In some cases, an SMS will be sent in response to the request, and in some cases the data will be displayed directly on the screen.

To obtain information about mobile Internet and other options, use the combination *135#. After entering, a menu will open in which you can select different services and familiarize yourself with them, as well as, if necessary, activate them. There is another menu that allows you to open help and commands for other queries; for this, users need to dial *141#. As you can see, Velcom USSD requests are very similar to MTS commands and work similarly.

MegaFon teams

The MegaFon operator also has a large list of combinations that subscribers should familiarize themselves with. You can see all possible codes on the official page, and only the most popular among users will be described below:

To call a menu, which in functionality can replace a personal account, enter *105#.
You can find out account information using the code *100#.
You can view your number by requesting *205#.
Remaining package offers are found out through the combination *558#.
To detail information about the tariff used, enter *105*3#.
Information about the bonus balance is provided using the code *115#.
It is very convenient to use the “Call me back” service if you enter *144*client’s mobile phone number# on the keypad.
To top up the balance of another MegaFon user, use the combination *143*number#.
You can use the “Promised Payment” service by entering *106#.

These are the most common MegaFon USSD requests that are used most often.

Sooner or later, combinations will be useful to every mobile subscriber, so it is better to study the most important ones so that they can be applied at the right time. All commands from MegaFon are completely free, and clients can use them in their work at any time convenient for themselves.

Conclusion

As you can see, there are a lot of requests, and they are all responsible for individual services. It is important, after entering one or another combination, not to forget to make a call to send the command, otherwise the necessary information will not be provided.

People who use the communication services of cellular companies often forget about the conditions under which their number is serviced. Getting used to regular calls to specific destinations and corresponding charges, subscribers have to work hard to find out how much a particular service will cost. For example, calling to another country, etc.

In order to avoid falling into such situations, it is enough to find out what prices for the selected tariff plan are used on the SIM card. How can I find out the tariff plan for Velcom and clarify the terms of service? Is it possible to do this yourself or do you need to contact dispatch service specialists? All these issues will be discussed in the article.

How to find out the tariff plan for Velcom: possible options

A subscriber can obtain data regarding his number in several ways. Conventionally, they can be divided into two categories: through self-service systems or with the help of the operator’s service employees mentioned earlier.

Obtaining any data related to the account status, list of connected services and options is free of charge. Let's take a closer look at each of the methods that can be used to view information about Velcom tariffs (corporate tariff, options for individuals).

Using an automated service to manage your number

The service operator "Velcom" has developed an entire service that is intended for subscribers of this company and allows for complete control of the number: change tariffs, activate and deactivate services, view expense data and receive other information. For people who use communication services and are already familiar with this service, the question of how to find out the tariff for Velcom is not relevant, because all the information is at hand. You can receive it in any convenient way: through a USSD service, by calling a short number, or via the Internet.

How to find out the tariff plan for Velcom through the web interface?

If you want to have full access to your number, view it and at any time independently manage services, account and change Velcom tariffs (“Everyone Talks”, “Smart”, etc.), then we recommend using the web interface. By going to the cellular company’s website and clicking on the “personal account” link, you can find yourself on the home page.

Here, before gaining access, you will need to register. This is not difficult to do; you should carefully read the instructions located on this form. This procedure is carried out only once. In the future, the subscriber will be able to open his personal page at any time, using the assigned password. As mentioned earlier, having the opportunity to view data by number, a person who is a client of Velcom will be able to perform any actions “by click”.

Voice information system

For people using a yellow SIM card, those who better assimilate information received by voice, a voice information system has been developed. By dialing the combination 411 (+ dial key) from your number, you can get to the multifunctional service. It is enough to select the appropriate items to obtain the necessary data. Please note that here you can also perform any operations with the number. In addition, you can always press the button to connect with an operator if some actions cause difficulties and you need to clarify some nuances.

Short (USSD) request service

If you are interested in Velcom, use the SMS notification method. You can send a USSD request from the SIM card for which you want to receive data as follows: *141*2*1# + dial key.

In response to such a question, the operator will send a text notification to the client’s number containing the name of the tariff. By the way, this request is also perfect for those subscribers who do not understand their number and would like to refresh their memory. After all, the message sent by the automatic service in response to the previously given combination also contains a telephone number.

View fare information

After the client finds out what tariff he uses on his number, he can easily clarify what conditions apply to him. In particular, we are talking about the cost of communication services, the amount of the subscription fee (if any), the number of packages that can be included in monthly or daily payments. It is more convenient to do this through the official resource of the operator; it can be easily found through a search engine. Next, you need to find the desired name in the “Tariffs” section of the Velcom website (Smart, for example) and read the conditions:

You must pay 14.50 rubles monthly for using the tariff plan.
For the specified fee, the subscriber receives six hundred free minutes, which he can use at his own discretion. It is important to consider that this limit does not include calls to short numbers (third-party content providers) and calls to international destinations.
You can also call your “favorite” numbers (of which no more than five can be assigned) for free within the established limit. If it is exhausted, calls will continue to be free to the numbers allocated to the “favorite” list.
You can also use the Internet for a subscription fee of 14.50 rubles. per month is free within one gigabyte.

Full terms and conditions of the Smart tariff plan and other tariffs can be found on the official website or by calling customer support.

The simplest and most famous USSD request is to check the balance of your personal account: *100#. It is universal: it is valid for velcom, MTS, and life:). But other USSD operations are not always known to users, although many Slutsk residents are not averse to simplifying their lives by using the capabilities of USSD. We bring to your attention a list of some USSD requests from mobile operators.

velcom USSD requests

*100*1# - information about the remaining minutes, SMS, MMS and Internet traffic included in the subscription fee.
*100*2# - notification of the balance of the prepayment.
*100*3# - information about the amount of the monthly payment, the remaining amount to pay for the goods in installments and the date of completion of the write-off of installments.
*114*1# - refusal of SMS mailings from the company.
*114*2# - refusal to listen to ACCA news (automated subscriber service).
*115*0# - receiving USSD messages in transliteration.
*115*1# - receiving USSD messages in Cyrillic.
*145# - providing the opportunity to work without prepayment.
*145*9# - switch to prepaid work.
*131*company subscriber number# - “Waiting for a call.”
*135*1# - connecting to the Mobile Internet service, changing the TP of the Mobile Internet service, changing/deleting an application to change the TP of the Mobile Internet service.
*135*2# - connect/disconnect MMS.
*135*0# - receiving settings for the “Mobile Internet” service, MMS, streaming video (“Mobile TV”), all available.
*141*2# - information about the phone number and tariff plan.
*141*3*1 (*2,)# - operations related to international communication services (roaming). Except for subscribers connected via the Unified tariff plan.
*141*3*3# - connect/change your favorite number. Except for subscribers connected to the BUSINESS.PRO, BUSINESS.PRO.WEB, WEB 250, WEB 500 tariff plans).
*141*3*4# - change the tariff plan.
*141*3*5# - “Pause.”
*141*3*7# - “Back in touch.”
*141*5# - repeat invoice for a closed period by e-mail.
*141*9# - USSD help.

USSD requests privet (trademark of velcom)

*120# - information about the state of the personal account and the validity period of the statuses;
*124*card code# - replenishment of the account with a PRIVET prepaid card;
*131*company subscriber number# - “Waiting for a call” in the velcom network/roaming (status “Banned outgoing communication”);
*114# - unsubscribe from SMS-mailing HELLO.
*126# - menu of additional services. Among them:
*126*1*1# - connect/disconnect the Mobile Internet service;
*126*1*2# - connect/disable MMS service;
*126*1*5# - connect/disconnect the “Back in Touch” service;
*126*1*6# - connection to the Internet 50 service;
*126*9# - USSD help (SMS with basic requests can be received in the “Active” and “Banning outgoing communication” status)

MTS USSD requests

*110# - Menu of the “Stay in touch!” service, thanks to which you can manage the “They called you!” services. (messages are received with numbers, number of calls and their time when you were unavailable or could not answer the call) and “There is a connection!” (no more than ten subscribers whose calls you missed are sent messages indicating that they are already available).

*120*(number of the subscriber to whom you are sending the request)# - “Call me back!” service. Available only to MTS subscribers who are partially blocked. Maximum number of “Call me back!” requests - no more than 5 per day.

*363*375ХХХХХХХХ*YYYYY#, where: 375Х... - telephone number of the subscriber in whose favor the order is being generated; Y... - amount (number from 500 to 10,000 rubles) - “Share balance” service.

*111# - USSD portal allows you to manage your account, connect and disconnect services, carry out transactions with your balance, use many information and entertainment services without remembering the access number.
The main menu of the USSD portal includes:
1. Hit - all the latest: games, melodies, videos, weather;
2. USSD assistant. Allows you to manage your MTS account and services;
3. Promotions/Services. Allows you to obtain information and activate current MTS marketing campaigns, as well as activate additional services for your phone;
4. Horoscope for today, tomorrow, the day after tomorrow, subscription to the horoscope;
5. Play - games;
6. Download - games, melody, videos, pictures;
7. Also - weather, jokes, aphorisms, exchange rates, tests and much more.

USSD requests life:)

*105# - information about the validity periods of Internet packages, SMS packages, video calls, bonuses, free minutes.
*115# - information about the current tariff plan and phone number.

life:) USSD requests for independent operations:
*100*card code# - top up your personal account using top-up cards;
*110*1# - switch to tariff plan;
*110*2# - add service;
*110*3# - add/remove service package;
*110*5# - add/remove tariff Internet service;
*110*6*1*1# - add/remove tariff SMS service;
*120*1# - use the “Balance Transfer” service;
*120*2# - use the “Call me” service;
*120*6*1# - add/reject the “Voicemail” service;
*120*6*2# - add/refuse the “Who called?” service;
*120*6*3# - add/refuse the “Back on the Network” service;
*120*7# - add/reject the Caller ID service;
*120*8# - add/refuse the “Call Barring” service;
*120*9# - set/change password;
*150# - perform operations with your favorite numbers.

Using the USSD menu is free. The mobile operator’s system, as a rule, warns about possible one-time costs for changing the tariff plan or connecting services.
To use a USSD request, enter the required key combination on your phone keyboard and press the “Call” key, after which the final answer to your request will appear on the phone display or a list of further possible operations will be offered.
Please note that in some cases, actions using USSD requests may affect the balance status of your phone number. If the actions in the USSD menu raise questions for you, you can get all additional information on the official websites of mobile operators or at their representative offices.
Also, when using some USSD commands, there are other conditions that depend on your tariff plan and other factors.
The USSD menu is compiled based on data from the official websites of mobile operators velcom.by, privet.by, mts.by, life.com.by.

1. The “Favorite Number” service allows subscribers to make calls to a number in the velcom network at special rates.
2. The company subscriber number can be selected as a “favorite” number.
3. The number of “favorite” numbers and the payment procedure are determined by the subscriber’s tariff plan.
4. Adding/changing “favorite” numbers is done by the subscriber independently from his mobile phone
4.1. via USSD:

*141*3*3# call (for velcom subscribers)
*126*7# call (for PRIVET subscribers)

4.2. using ISSA, if the subscriber has this service.
5. Adding “favorite” numbers in the quantity corresponding to the subscriber’s tariff plan is done without charging a fee.
6. Any change to the subscriber number selected as “favorite” is paid in accordance with the subscriber’s tariff plan.
7. When changing the tariff plan (available to velcom subscribers), “favorite” numbers are automatically deleted. Further assignment/change of the “favorite” number is carried out by the subscriber independently in accordance with the new tariff plan.
8. Velcom/PRIVET numbers transferred to another network cannot be selected as “favorites”. When a subscriber number is transferred to another network, it is automatically removed from the list of “favorite” numbers of company subscribers.
9. If a client transfers, with the written consent of the company, the right to use a subscriber number to a new client without changing the tariff plan (available to velcom subscribers), the assigned “favorite” numbers are saved.
10. If a client transfers, with the written consent of the company, the right to use a subscriber number to a new client by changing the tariff plan to any other tariff plan of the company (available to velcom subscribers), “favorite” numbers are automatically deleted. Further assignment/change of “favorite” numbers is carried out by the subscriber independently in accordance with the new tariff plan.
11. The company has the right to unilaterally change this procedure by publishing changes on the official website of the company.
12. In everything else not regulated by this procedure, the client and the company are guided by the provisions of the agreement concluded between the client and the company.

*141*3*3# call (for velcom subscribers)
*126*7# call (for PRIVET subscribers)

How to find out the tariff plan for Velcom: possible options

Using an automated service to manage your number

The service operator "Velcom" has developed an entire service, which is intended for subscribers of this company and allows for complete control of the number: change tariffs, activate and deactivate services, view expense data and receive other information. For people who use communication services and are already familiar with this service, the question of how to find out the tariff for Velcom is not relevant, because all the information is at hand. You can receive it in any convenient way: through the USSD service, by calling a short number, or via the Internet.

How to find out the tariff plan for Velcom through the web interface?

Voice information system

Short (USSD) request service

If you are interested in Velcom, use the SMS notification method. You can send a USSD request from the SIM card for which you want to receive data as follows: *141*2*1# + dial key.

View fare information

You must pay 14.50 rubles monthly for using the tariff plan.
For the specified fee, the subscriber receives six hundred free minutes, which he can use at his own discretion. It is important to consider that this limit does not include calls to short numbers (third-party content providers) and calls to international destinations.
You can also call your “favorite” numbers (of which no more than five can be assigned) for free within the established limit. If it is exhausted, calls will continue to be free to the numbers allocated to the “favorite” list.
You can also use the Internet for a subscription fee of 14.50 rubles. per month is free within one gigabyte.

Full terms and conditions of the Smart tariff plan and other tariffs can be found on the official website or by calling customer support.

Overview of possible options

USSD request(by entering a special request, you can view the data of interest quickly and without additional costs through the USSD service);
call the support line(experienced consultants will answer customer questions and help determine the choice of tariff or additional options);
ISSA service(popular Internet assistant, full name - Internet subscriber service).

Method 1. Contact the support line

Method 2. How to find out the Velcom tariff plan (USSD service)

Other USSD requests that may be useful to customers

*141*2*3*1# - for Internet users from mobile gadgets, this request will allow you to find out what conditions are currently applied to the number when using the Internet; if you connect to a tariff or option with a subscription fee, the date upon which the money will be debited will also be indicated.
*141*3*4# - for subscribers who have decided to change their tariff plan, this request will allow them to realize their plans.

Method 3. Using the Internet Assistant

How to find out the tariff plan on Velcom if you have the Internet? The web interface of the ISSA service is available on the official website of the Belarusian telecom operator. First, before gaining access to viewing and managing your number, you must register in the system. How this can be done is contained on the main page of the service. Here is a brief overview of the actions that the subscriber will need to perform.

Registration on the service

A subscriber who wishes to gain access to the Internet service and a functional personal account must complete the following steps:

From a mobile gadget in which a SIM card with the desired number is installed, enter the request *141*0#. This command allows you to access the service for setting a password to access the web information service.
Assign and enter a sequence of characters (password) to access the Internet assistant. Of the basic requirements for a password, only one should be highlighted: the number of characters should not be less than five. In this case, the maximum length of the access code cannot exceed ten characters.
Wait a few minutes for the data to be updated in the system and go back to the page for entering authorization data, indicating your number and the password assigned in the previous step.

What features are available in the online customer service?

find out the balance;
view the name and parameters of the tariff plan;
change the tariff;
view the list of current options;
manage connected services: disable and connect them, etc.

Conclusion

“Mobile Internet” is a company’s service for providing wireless Internet access using 2G/3G/3G+ technologies, allowing you to transmit and receive data using a mobile device (phone, modem, etc.) that supports these technologies.

1. The “Mobile Internet” service is provided to all subscribers of velcom tariff plans

“Internet for tariff plan” - the Internet access service is provided to all subscribers of the company upon concluding an agreement, changing the tariff plan (if the Mobile Internet service was not connected to the old tariff plan, or if “Internet for the tariff plan” was used, or in the case described in clause 8.2). The service is provided without a subscription fee;
Internet packages 250, 350, 750, 1000, 1500, 3000, 3000 + voka TV, 5000 + voka TV – additional packages with the included traffic volume in megabytes corresponding to the name (hereinafter referred to as Internet packages). The period for providing Internet packages is 30 days. If the Internet package is not disabled or changed, it will automatically renew for the next period. The cost of the Internet package is debited in full at a time from the balance of the client’s personal account when connecting, renewing or changing the Internet package. Traffic is provided within 24 hours from the moment of connection, renewal or change of the Internet package.
“Light” package – a package with a subscription fee, without included traffic. The subscription fee for the package is charged daily in equal installments in proportion to the number of days in the month.
Internet traffic packages 500 MB and 1 GB - one-time packages of additional Internet traffic. The validity period of the packages is limited to the current period of provision of tariff plans. The cost of packages is written off as a one-time payment; traffic is provided in full when purchasing packages.
package “Unlimited Internet for a day” - a one-time package with an unlimited amount of Internet traffic. The package is valid for 1 day. The cost of the package is charged in full at a time, traffic is provided from the moment of connection.

2. Internet packages and the “Light” package are available on the following tariff plans:

Tariff plan	Plastic bag
Tariff plan	250	350	750	1000	1500	3000	3000+voka	5000+voka	Easy
Smart Premiere/ "Corporate Smart Premiere"
Smart 1/2/3, "Corporate Smart 1/2/3"
"Big plans"
BUSINESS.PRO
BUSINESS.PRO.WEB
Other tariff plans (except those listed in clause 3)

3. Internet packages and the “Light” package are not provided on tariff plans: Smart Infinite, “Business Class”, BUSINESS.PRO. Platinum, “At Your Rhythm”, “Comfort” tariff line, Internet tariff lines: “Super WEB”, WEB and “Non-stop”. These tariff plans also do not provide the ability to connect/disconnect mobile Internet.
4. One-time Internet traffic packages are available on the following tariff plans:

5. Management of the Mobile Internet service is carried out by subscribers independently:

via USSD *135*1# - connect/disconnect Internet packages, Mobile Internet services;
via USSD *135*7# - connection of one-time packages of additional Internet traffic;
in ACCA, by number 411.

6. Changing the Internet package, connecting/disconnecting the Mobile Internet service (on tariff plans where this option is provided) is carried out within 24 hours from the moment the application is submitted.
7. Applications for transactions with the Mobile Internet service will not be processed if:

the subscriber's service is suspended partially or completely in accordance with the contract for the provision of telecommunication services;
There are not enough funds on the personal account balance to write off the cost of the new package (for subscribers paying for prepaid communication services).

8. Features of using Internet packages:
8.1. When using a tariff plan that includes megabytes in the subscription fee, the traffic of the Internet package will be consumed first, then the traffic of the tariff plan.
8.2. When changing the tariff plan, the Internet package will be saved if it is available on the new tariff plan, otherwise the Internet package will be changed to “Internet for the tariff plan”.
8.3. Traffic in excess of that included in the Internet package is charged according to the tariffs of the Internet package.
8.4. The unused balance of Internet package traffic is reset to zero after 30 days, when the package is changed, or when the service is disconnected.
8.5. Information about the date of the next write-off of the cost of the Internet package and the provision of a new volume of traffic can be obtained by USSD *135*3*2#.
8.6. If, at the time of the next write-off of the cost of the Internet package, the subscriber is disconnected from outgoing and incoming communications due to late payment for the company’s services or use of the “Pause” service, the cost of the Internet package will be written off after the service is restored in full. Traffic will be provided in full within 24 hours and is available until the end of the Internet package provision period. The period of provision of the Internet package is not extended by the period of disconnection from the communication network.
8.7. The cost of Internet packages 3000 + voka TV, 5000 + voka TV includes a subscription to a limited number of channels of the voka TV service. You can use voka TV using the special voka application or on the website www.voka.tv. The voka service is provided in accordance with the Procedure for the provision of the voka service.
9. Features of using one-time packages of 500 MB or 1 GB:
9.1. One-time packages of additional Internet traffic with a volume of 500 MB or 1 GB are provided on the WEB Start, WEB 4, WEB 8, WEB 10 + voka, WEB 16, “At Your Rhythm” tariff plans and are valid until the date of the next traffic update included in the tariff plan .
9.2. Purchasing additional traffic packages is possible after the included traffic of the tariff plan or a previously purchased one-time package has been completely used up.
9.3. The remainder of the one-time package traffic is not saved when changing the tariff plan.
9.4. You can purchase packages of additional Internet traffic using the methods described in paragraph 5, as well as on the special page infopage.site. Redirection to this page occurs automatically after the end of the included traffic of the tariff plan/one-time package. The page is accessible in the mobile device browser only via the HTTP protocol. When using the HTTPS protocol, the page is not guaranteed to display.
9.5. When redirected to a special page, HTTP traffic to other resources is blocked until the subscriber chooses the method of further working with the mobile Internet: purchasing a package or paying for traffic.
9.6. Traffic from applications, email clients, browsers with specific proxy server settings, and other traffic other than HTTP is not blocked. Such traffic is charged in accordance with the subscriber's tariff plan.
9.7. If the subscriber chooses to use paid traffic, redirection to a special page until the end of the current tariff plan period is not performed.
10. Features of using the one-time package “Unlimited Internet for a day”:
10.1. The one-time package “Unlimited Internet for a day” is provided on tariff plans of the “Comfort” and “Super WEB” lines and is valid for 24 hours from the moment of connection.
10.2. You can purchase the “Unlimited Internet for a day” package both while using the included traffic of the tariff plan, and after it has been used up.
10.3. The “Unlimited Internet for a day” package, purchased before the end of the included traffic of the tariff plan, is consumed first.
10.4. The purchase of each subsequent “Unlimited Internet for a day” package becomes possible only after the previous one has expired.
10.5. The “Unlimited Internet for a day” package is disabled when changing the tariff plan to a tariff plan that does not belong to the “Comfort” and “Super WEB” lines.
11. Clients of the company - legal entities, if necessary, can prohibit subscribers from independently connecting to the Mobile Internet service or changing it by submitting a written application to velcom sales and service centers or to the official attorneys of the company, as well as with the help of ISSA (ISSA administrator). The effect of the ban is not taken into account when changing the subscriber's tariff plan to the tariff plans listed in clause 3.
12. Internet traffic in the velcom network is charged at 1 KB.
13. The included Internet traffic of tariff plans, Internet packages and one-time packages is not consumed in roaming. Internet traffic consumed while roaming is paid at roaming rates. Roaming Internet traffic is charged at 10 KB on tariff plans of the BUSINESS.PRO, “Super WEB”, WEB, “Non-stop”, Smart, “Corporate Smart”, “Big Plans”, “Telemetry”, “Comfort” lines, tariff plans “Business class” and “At your rhythm” and 50 KB - on other tariff plans.
14. The company has the right to unilaterally change this Procedure by publishing the changes on the official website.
15. In everything else not regulated by this Procedure, the client and the company are guided by the provisions of the agreement on the provision of telecommunication services concluded between the client and the company.

What are commands for?

USSD request is a kind of option for mobile customers, which is installed along with SMS and is a basic service of any operator. Translated, this abbreviation means “additional option that has no structure.”

velcom USSD requests

USSD requests privet (trademark of velcom)

MTS USSD requests

USSD requests life:)

*105# - information about the validity periods of Internet packages, SMS packages, video calls, bonuses, free minutes.
*115# - information about the current tariff plan and phone number.

How to find out the tariff plan for Velcom: possible options

Using an automated service to manage your number

How to find out the tariff plan for Velcom through the web interface?

Voice information system

Short (USSD) request service

If you are interested in Velcom, use the SMS notification method. You can send a USSD request from the SIM card for which you want to receive data as follows: *141*2*1# + dial key.

View fare information

You must pay 14.50 rubles monthly for using the tariff plan.
For the specified fee, the subscriber receives six hundred free minutes, which he can use at his own discretion. It is important to consider that this limit does not include calls to short numbers (third-party content providers) and calls to international destinations.
You can also call your “favorite” numbers (of which no more than five can be assigned) for free within the established limit. If it is exhausted, calls will continue to be free to the numbers allocated to the “favorite” list.
You can also use the Internet for a subscription fee of 14.50 rubles. per month is free within one gigabyte.

Full terms and conditions of the Smart tariff plan and other tariffs can be found on the official website or by calling customer support.

"Mobile Internet"– a company’s service for providing wireless Internet access using 2G/3G/3G+ technologies, allowing you to transmit and receive data using a mobile device (phone, modem, etc.) that supports these technologies.

1. The Mobile Internet service includes:

“Internet for tariff plan” - the Internet access service is provided to all subscribers of the company upon concluding an agreement, changing the tariff plan (if the Mobile Internet service was not connected to the old tariff plan, or if “Internet for the tariff plan” was used, or in the case described in clause 8.2). The service is provided without a subscription fee.
Internet packages 250, 350, 750, 1000, 1500, 3000, 3000 + voka TV, 5000 + voka TV – additional packages with the included traffic volume in megabytes corresponding to the name (hereinafter referred to as Internet packages). The period for providing Internet packages is 30 days. If the Internet package is not disabled or changed, it will automatically renew for the next period. The cost of the Internet package is debited in full at a time from the balance of the client’s personal account when connecting, renewing or changing the Internet package. Traffic is provided within 24 hours from the moment of connection, renewal or change of the Internet package.
“Light” package – a package with a subscription fee, without included traffic. The subscription fee for the package is charged daily in equal installments in proportion to the number of days in the month.
Internet traffic packages of 500 MB, 1 GB, “1 GB for everything else” and 10 GB - one-time packages of additional Internet traffic. The validity period of the packages is limited to the current period of provision of tariff plans. The cost of packages is written off as a one-time payment; traffic is provided in full when purchasing packages.
package “Unlimited Internet for a day” - a one-time package with an unlimited amount of Internet traffic. The package is valid for 1 day. The cost of the package is charged in full at a time, traffic is provided from the moment of connection.
“Unlimited Internet” package is a package with an unlimited amount of Internet traffic, which is valid on the following tariff plans at the speed of mobile Internet, depending on the tariff plan:

2.Internet packages and the “Light” package are available on the following tariff plans:

Tariff plan	Plastic bag
Tariff plan	250	350	750	1000	1500	3000	3000 + voka TV	5000 + voka TV	"Easy"
Smart Premiere / Corporate Smart Premiere
Smart 1/2/3/ Corporate Smart 1/2/3
"Big plans"
BUSINESS.PRO
BUSINESS.PRO.WEB
Other tariff plans (except those listed in clause 3)

Internet packages and the “Light” package are not provided on the following tariff plans: Smart Infinite, “Business Class”, BUSINESS.PRO. Platinum, “At your rhythm”, lemon, “Semi-annual subscription”, Light, Light +, Light + for business, tariff line “Comfort”, “Comfort+”, “Comfort+ for business”, tariff line for the Internet: Super WEB , WEB and "Non-stop". These tariff plans also do not provide the ability to connect/disconnect mobile Internet.

3. One-time Internet traffic packages are available on the following tariff plans:

4. The “Mobile Internet” service is managed by subscribers independently:
via USSD *135*1# - connect/disconnect Internet packages, Mobile Internet services;
via USSD *135*7# - connection of one-time packages of additional Internet traffic;
in your Personal Account;
in ACCA, by number 411.

5. Changing the Internet package, connecting/disconnecting the Mobile Internet service (on tariff plans where this option is provided) is carried out within 24 hours from the moment the application is submitted.

6. Applications for transactions with the Mobile Internet service will not be processed if:
the subscriber's service is suspended partially or completely in accordance with the contract for the provision of telecommunication services;
There are not enough funds on the personal account balance to write off the cost of the new package (for subscribers paying for prepaid communication services).

7. Features of using Internet packages:
7.1. When using a tariff plan that includes megabytes in the subscription fee, the traffic of the Internet package will be consumed first, then the traffic of the tariff plan.
7.2. When changing the tariff plan, the Internet package will be saved if it is available on the new tariff plan, otherwise the Internet package will be changed to “Internet for the tariff plan”.
7.3. Traffic in excess of that included in the Internet package is charged according to the tariffs of the Internet package.
7.4. The unused balance of Internet package traffic is reset to zero after 30 days, when the package is changed, or when the service is disconnected.
7.5. Information about the date of the next write-off of the cost of the Internet package and the provision of a new volume of traffic can be obtained via USSD *135*3*2# and in your Personal Account.
7.6. If, at the time of the next write-off of the cost of the Internet package, the subscriber is disconnected from outgoing and incoming communications due to late payment for the company’s services or use of the “Pause” service, the cost of the Internet package will be written off after the service is restored in full. Traffic will be provided in full within 24 hours and is available until the end of the Internet package provision period. The period of provision of the Internet package is not extended by the period of disconnection from the communication network.
7.7. The cost of Internet packages 3000 + voka TV, 5000 + voka TV includes a subscription to a limited number of channels of the voka TV service. You can use voka TV using the special voka application or on the website www.voka.tv. The voka service is provided in accordance with the Procedure for the provision of the voka service.

8. Features of using one-time packages of 500 MB or 1 GB:
8.1. One-time packages of additional Internet traffic with a volume of 500 MB or 1 GB are provided on the WEB Start, WEB 4, WEB 8, WEB 10 + voka, WEB 16, “At Your Rhythm” tariff plans and are valid until the date of the next traffic update included in the tariff plan .
8.2. Purchasing additional traffic packages is possible after the included traffic of the tariff plan or a previously purchased one-time package has been completely used up.
8.3. The remainder of the traffic of a one-time package is not saved when changing the tariff plan, where the 500 MB and 1 GB packages are not available.
8.4. You can purchase packages of additional Internet traffic using the methods described in paragraph 5, as well as on the special page infopage.site. Redirection to this page occurs automatically after the end of the included traffic of the tariff plan/one-time package. The page is accessible in the mobile device browser only via the HTTP protocol. When using the HTTPS protocol, the page is not guaranteed to display.
8.5. When redirected to a special page, HTTP traffic to other resources is blocked until the subscriber chooses the method of further working with the mobile Internet: purchasing a package or paying for traffic.
8.6. Traffic from applications, email clients, browsers with specific proxy server settings, and other traffic other than HTTP is not blocked. Such traffic is charged in accordance with the subscriber's tariff plan.
8.7. If the subscriber chooses to use paid traffic, redirection to a special page until the end of the current tariff plan period is not performed.

9. Features of using the one-time package “Unlimited Internet for a day”:
9.1. The one-time package “Unlimited Internet for a day” is provided on the “Comfort”, “Comfort+”, “Comfort + for Business”, Super WEB tariff plans and on the “Semi-Annual Subscription”, Light, Light +, Light + for Business and Valid for 24 hours from the moment of connection.
9.2. You can purchase the “Unlimited Internet for a day” package both while using the included traffic of the tariff plan, and after it has been used up.
9.3. The “Unlimited Internet for a day” package, purchased before the end of the included traffic of the tariff plan, is consumed first.
9.4. The purchase of each subsequent “Unlimited Internet for a day” package becomes possible only after the previous one has expired.
9.5. The “Unlimited Internet for a day” package is disabled when changing the tariff plan to a tariff plan that does not belong to the “Comfort”, “Comfort+”, “Comfort+ for business”, Super WEB, Light, Light +, Light + for business tariff plans .

10. Features of using the “10 GB Package” service:
10.1. A one-time package of additional Internet traffic with a volume of 10 GB at unlimited speed is provided on the Smart Infinite tariff plan and is valid until the date of the next update of the traffic included in the tariff plan.
10.2. Purchasing an additional traffic package is possible if you consume more than 100 GB of Internet traffic in the current month or after a previously purchased one-time package.
10.3. The purchase of each subsequent “10 GB Package” becomes possible only after the expiration of the previous one.
10.4. The remainder of the one-time package traffic is not saved when changing the tariff plan.

11. Features of using the “1 GB for everything else” package:
11.1. A one-time package of additional Internet traffic of 1 GB is provided for access to resources, with the exception of Viber (official mobile application, including for PC), VKontakte (PC version, mobile version, official mobile application), Instagram (PC version , mobile version, official mobile application), games World of Tanks Blitz and World of Tanks and is valid until the date of the next update of the traffic included in the tariff plan.
11.2. The remainder of the one-time package traffic is not saved when changing the tariff plan.
11.3. The unused balance of the one-time package traffic is accumulated and transferred to the next month in an amount of up to 10 GB.
11.4. Connecting a one-time package is available using:
USSD *135*7#;
Personal account;
velcom recommends applications;
site site.

12. Features of using the “Unlimited Internet” package:
12.1. Package management is available using:
USSD *135*7#;
Personal account;
12.2. When the “Unlimited Internet” package is connected, the traffic of the tariff plan is consumed first, then the package.
12.3. The cost of the Internet package is debited in full at a time from the balance of the client’s personal account when connecting, renewing or changing the Internet package.
12.4 Package renewal – on the 1st of every month.
12.5. When simultaneously connecting the “Unlimited Internet” and “Unlimited Internet for a day” packages, the “Unlimited Internet for a day” package is consumed first.
12.6. The package is not disabled when changing the tariff plan if it is provided on the new tariff plan.
12.7. From 08/13/2018, the possibility of transferring data via the bittorrent protocol is excluded when using the “Unlimited Internet” package by subscribers of the “Comfort” and “Comfort+” tariff plans (after using up the Internet traffic included in the subscription fee).

13. Clients of the company - legal entities, if necessary, can prohibit subscribers from independently connecting to the Mobile Internet service or changing it by submitting a written application to velcom sales and service centers or to the official attorneys of the company, as well as in the Personal Account (administrator). The effect of the ban is not taken into account when changing the subscriber's tariff plan to the tariff plans listed in clause 3.

14. Internet traffic in the velcom network is charged at 1 KB.

15. Subscribers of velcom tariff plans who have additionally activated the “International Roaming” or SMS-roaming service can use the “Mobile Internet” service in the networks of the company’s foreign roaming partner operators.
15.1. Information on the availability of Internet roaming in the network of the company's foreign partner operator for roaming and the cost of roaming Internet traffic is provided on a special page of the website www.site.
15.2. The included Internet traffic of tariff plans, Internet packages and one-time packages is not consumed in roaming. Internet traffic consumed while roaming is paid at roaming rates. Roaming Internet traffic is charged at 10 KB on tariff plans of the BUSINESS.PRO, Super WEB, WEB, “Non-stop”, Smart, Corporate Smart, “Big Plans”, “Telemetry”, “Comfort”, “Comfort+” lines. , “Comfort+ for business”, tariff plans “Business class”, “Semi-annual subscription”, “At your rhythm”, lemon, Light, Light +, Light + for business and 50 KB each on other tariff plans.
15.3. The company has the right to inform subscribers (except for subscribers of PRIVET tariff plans) about the Internet traffic they used, if the volume of its consumption in roaming (from the moment of registration in the roaming partner’s network until the moment they return to the home network) exceeds 20 MB.

16. The company has the right to unilaterally change this Procedure by publishing the changes on the official website.

17. In everything else not regulated by this Procedure, the client and the company are guided by the provisions of the agreement on the provision of telecommunication services concluded between the client and the company.

What are commands for?

For a clear example, it’s worth understanding how such a combination works:

A mobile customer, for example, wishes to check the balance of a mobile phone using a service code.
On the phone keyboard, first press “*”, and then enter the desired number, the code of which is responsible for checking the balance.
After the numbers, “#” is entered and a call is made to send data to the network.
After a few seconds, balance information is sent to your phone in the form of an SMS or as an interactive menu on the gadget screen.

The benefits of combinations

Using such codes you can control your mobile phone number. Network clients can send requests to other people to send money or simply call back.

For a more detailed consideration of combinations, you should indicate data for different operators in Russia.

Popular MTS combinations

If there are characters on your phone in messages and other parts of documents that cannot be read, then you need to enter *111*6*1#. Below are the most popular codes from the MTS Russian operator:

Account verification is carried out by dialing the combination *100#.
You can see what the funds were withdrawn for during the last 5 actions using the command *145#.
You can quickly find out your mobile number using the code *111*10#.
To check active paid options, use *111*11#.
To check the current tariff, use *111*12#.
You can find out about the remaining package offers by entering *217#.
You can top up your balance using a bank card by requesting *115#.

Velcom teams

MegaFon teams

To call a menu, which in functionality can replace a personal account, enter *105#.
You can find out account information using the code *100#.
You can view your number by requesting *205#.
Remaining package offers are found out through the combination *558#.
To detail information about the tariff used, enter *105*3#.
Information about the bonus balance is provided using the code *115#.
It is very convenient to use the “Call me back” service if you enter *144*client’s mobile phone number# on the keypad.
To top up the balance of another MegaFon user, use the combination *143*number#.
You can use the “Promised Payment” service by entering *106#.

These are the most common MegaFon USSD requests that are used most often.

Conclusion

Choice

Overview of possible options

Method 1. Contact the support line

Method 2. How to find out the Velcom tariff plan (USSD service)

Other USSD requests that may be useful to customers

Method 3. Using the Internet Assistant

Registration on the service

What features are available in the online customer service?

Conclusion

What are commands for?

The benefits of combinations

Popular MTS combinations

Velcom teams

MegaFon teams

Conclusion

How to find out the tariff plan for Velcom: possible options

Using an automated service to manage your number

How to find out the tariff plan for Velcom through the web interface?

Voice information system

Short (USSD) request service

View fare information

velcom USSD requests

USSD requests privet (trademark of velcom)

MTS USSD requests

USSD requests life:)

How to find out the tariff plan for Velcom: possible options

Using an automated service to manage your number

How to find out the tariff plan for Velcom through the web interface?

Voice information system

Short (USSD) request service

View fare information

Overview of possible options

Method 1. Contact the support line

Method 2. How to find out the Velcom tariff plan (USSD service)

Other USSD requests that may be useful to customers

Method 3. Using the Internet Assistant

Registration on the service

What features are available in the online customer service?

Conclusion

What are commands for?

velcom USSD requests

USSD requests privet (trademark of velcom)

MTS USSD requests

USSD requests life:)

How to find out the tariff plan for Velcom: possible options

Using an automated service to manage your number

How to find out the tariff plan for Velcom through the web interface?

Voice information system

Short (USSD) request service

View fare information

What are commands for?

The benefits of combinations

Popular MTS combinations

Velcom teams

MegaFon teams

Conclusion

You may also like