Remove the password from Windows 7. If you suddenly forgot your Windows password: We break the password! And now about utilities

Login password – good way Protect important files from strangers. This article will help you set or remove a password for logging into the system, as well as completely reset it if you forgot it using a special flash drive.

Setting a password on Windows 7

Even a simple combination of numbers is a guarantee that very young family members or work colleagues will not have access to information that is important to you. Creating a password is not difficult - the OS itself will help us with this.

First you need to turn on your computer and go to account, which must be protected with a password. To set a password, you need:

Go to menu "Start" → click on the user icon (a window will open "User accounts" );

Figure 1. Click on the user icon.

In the window that appears, select the item “Creating a password for your account” → install password, re-enter it in the column "Password confirmation" , come up with and write down “Password hint” → save changes with a click of a button "Create a password" ;

Figure 2. Enter New Password.

Restart your computer to make sure the steps are correct.

Ready.

These two simple steps will help protect your files.
If you want to change or remove your password, please read the next chapter. Be prepared that in order to reset your password, you may need to log into your computer. a large number of time, and may also require special equipment.

Password reset with proper skills available.

Therefore, if you are seriously concerned about the safety of your information, set a password on the BIOS. Instructions can be found in the chapter "".

Change or delete your account password (if you remember it)

These actions are no more complicated than those described in the previous chapter.
We will consider two situations: when you remember the password (further in the text), and when you forgot it (see chapter).

To delete or change secret code, need to:

Enter "Start" → click on the icon (located in the upper right corner above the name of the current account);
Now in the window "User Accounts" select the item you need: "Change…" or "Deleting your password" ;
Settings will open with fields that need to be filled out. You need to enter a new password, a confirmation hint for it (or the old one, if you delete it) → click on the button "Change password" (or "Remove password") .

Figure 3. Changing/removing the password.
Ready.

Now it is advisable to write down the new password and save it in a safe place. After reading this chapter, questions might arise if:

You have completely forgotten your password and want to view it or delete it;
You are looking for a more reliable way to protect your data than standard means.

Then check out the chapters that provide instructions on how to recover your password (even if you have forgotten it) and “Bonus” with installation steps.

Complete password removal on Windows 7

This chapter contains information on full reset password for absolutely any account.

For this you will need flash drive and a working (with the ability to log into the OS) computer. Attention!
All further actions must be approved by the account/computer owner.Let's begin.

Step 1. Preparing a flash drive.

First you need to clean the drive.

To do this in the folder "My computer" you need to right-click on the flash drive and select “Format...” → file system: « FAT 32" → "Begin" .

Wait for the process to complete.
Figure 4. Formatting our flash drive.
Step 2. Download the desired program to reset your password.

Everything is simple here: (archive is attached at the end of the article) → unpack to any convenient place → copy files to the root of the flash drive.

Step 3. Assign the status of the drive to boot.

It can be done regular means systems - using command line (CMD) .

To do this you need:

Open "Start" → enter the query in the search bar: “cmd” → open the corresponding item using the right mouse button (required!) → “Run as administrator” (a black command console will launch);

Figure 5. Open the command console with administrator rights.

Next you need to enter the command: "G: syslinux. exe- maG:» (instead of “G” in both cases use the letter of your flash drive, which can be found in the window "My computer");
The operation must take place no mistakes. You can now close the command prompt. If errors still occur, repeat the steps starting from "Step 1".

Figure 6. We get a seemingly “zero result.”
Step 4. We start the computer with bootable flash drive. Executing this step depends in part on your motherboard/laptop model. We need to set our drive to priority in Setup Menu (BIOS) or Boot Menu→ turn off the computer on which we plan to recover the password and:

Enter BIOS by pressing the F1/F2/F12/Delete button (depending on the motherboard);

If you don't know how to enter the BIOS on your computer or laptop, then...

Go to tab « Boot » (navigation is carried out using arrows on the keyboard);
Install the bootable USB flash drive yourself first in line « Boot priority ( order )» / « Boot device priority »
Save changes to tab « Exit » (« Save & Exit ») selecting an item « Exit Saving Changes » → confirm by pressing « Yes » .

The computer should automatically boot from the flash drive

Step 5. Removing the password.

First, you need to wait until the program is completely loaded (time 2 minutes if you are not sure). Enter the following commands sequentially without quotes(relevant for most users):
The following steps are also suitable for resetting the administrator password.

Click « Enter » ;
"C:\Windows\System32\config" – access to the register;
"Password Reset » – running the script complete removal password;
Enter Username whose password needs to be reset;
« Clear User Password » – clearing the password from the registry
«!» – just an exclamation point;
Press a key on the keyboard "Y" .

Now you need to restart your computer if this does not happen automatically. The login password will disappear and you will be able to continue using the OS. Don't forget to write down the new combination on a piece of paper to avoid similar troubles in the future. The following is information about the most reliable (standard, of course) method of keeping data on a computer practically invulnerable to hacking - installing protection in the BIOS.

Bonus. Setting a BIOS password

This password cannot be reset using a regular bootable USB flash drive. To remove this type of protection, you need to “examine” the computer hardware. Extract only CMOS can restore BIOS to factory settings (including clearing the password), if you forget your Setup login details Computer menu. To install such protection, you need:

Go to BIOS(this is done by pressing the F1/F2/F12/Delete button);
Find by tabs (usually « Security» or « Main» ) paragraph « Set User Password » (or « Bios Setting Password» ) → select by pressing the key « Enter » ;
Enter a new password → « Enter » .

Figure 7. Create a new password.

The protection is now installed only to enter the BIOS, and you need to make sure that the password is requested every time you start the computer. To do this, you need to find the item in the menu « Password Check » → set its value to “Always”;
Save your password by selecting « Save and Exit Setup » (can be located either in the general tab or in « Exit » ).

Ready.

The most secure protection is installed. Without access to the BIOS, outsiders will be able to do literally nothing. Be sure to write down your password so you don't accidentally forget it, and put it in a safe place.

Many users, in order to protect their information from prying eyes, set an administrator password for their Windows account. Some people forget for various reasons. installed code protection and to reset windows password carry out the procedure of reinstalling the entire system. And as you know, this matter takes a relatively long time.

There may also be problems with saving necessary files, because we cannot log into the system, and when installing windows, as we know, local disk on which the operating system will be installed must be formatted. Well, of course, you can always find a simpler solution to the problem, this is exactly what will be discussed in this article and you will learn how reset password in windows 7 without resorting to reinstallation.

The only complication is that we will need an installation disk or flash drive to work on the command line. If you don't have either of these on hand, you can always use your neighbor's computer to download the image and burn it to a disk or flash drive.

How to reset Windows 7 password if it is forgotten

Loophole for reset password protection Windows 7 has a sticky keys mode, which is triggered by pressing a key five times Shift, This is exactly what will help us bypass the security code we have forgotten. The essence of the procedure is that when you call the sticky mode, a command line window will open in which we will need to work. Read below on how to do this.

First you need to boot from installation disk or flash drive. In the first window, click next.

In the next window we are interested in the system recovery item, click on it.

If you have several operating systems installed, the list will show all available ones, select the one you need and move on.

In the System Recovery Options window, open the Command Prompt.

Enter the command:

copy D:\Windows\System32\sethc.exe D:\ and press enter.

sethc.exe- a file that causes sticky mode by pressing the key five times shift.

This command is used to copy of this file to the root of the drive (D:\) (in the system it is drive (C:\)).

copy D:\Windows\System32\cmd.exe D:\Windows\System32\sethc.exe

cmd.exe- the file responsible for calling the command line.

With this command we replace the file sethc.exe with cmd.exe. Confirm changes by entering a key "y".

In the password entry window, call the command line by pressing the key five times shift.

Enter the command: net user Andrey 54321 and confirm it by pressing enter.

net user - user selection function.
Andrey - account name (enter yours).
54321 is the new password.

After successfully completing the procedure, enter the changed password and rejoice.

Replace the command line back with Sticky Keys

If you are not interested in the sticky mode, then you can leave everything as is. To return a call this mode read on.

As you can see in the picture below, using the commands entered above, the file sethc.exe moved to the root of the disk. And in system folder system32, it has been replaced by the command line. Now we need to move it back. You can try just moving it to system32 and delete the false file located there. But it may not be possible to do this due to insufficient rights. Therefore, we will use the command line.

Open the start menu and enter in the search cmd and run the found file as administrator .

Enter the command:

copy C:\sethc.exe C:\Windows\System32\sethc.exe

Press enter and confirm with the " key" y". If everything was done correctly when pressing the key five times shift again the sticking mode will open .

ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.

Thank you for your attention!

Guide to resetting/removing account passwords Windows entries 7,8,10, XP when you turn on the computer.

Navigation

To protect personal data from prying eyes on computers with an operating system Windows it is possible to create user accounts that can only be accessed by entering set password. But, due to the fact that today almost every person has their own personal PC, the need to set a password rarely arises.

If you have already created an account with a password on your computer, and you want to remove it in order to speed up the loading of the operating system, then in our article we will tell you how to do this.

IMPORTANT: This article presents the most suitable password reset methods for beginners. On the Internet you can come across options for resetting your password by editing the registry ( file system Windows) and using a key file.
If you are not an experienced user and have never encountered such actions, then resorting to these two methods is strongly not recommended, even according to the instructions. The slightest mistake can lead to complete failure of your computer.

How to remove the startup password from a Windows XP computer?

Windows XP has long been outdated and is not supported by Microsoft, but many owners personal computers they still prefer it to other operating systems.

IN Windows XP There are two ways to remove the power-on password. But we will tell you only about one method, which is universal and suitable for all operating systems of the family Windows. You need to do the following:

Step 1.

Turn on your computer, open the start menu and click on “ Execute».

Step 2.

In the window that opens, in the text line, enter the command “ cmd" and press " Enter».

Step 3.

A command line window will open, in the field of which you need to enter the command “ control userpasswords2" and press " Enter».

Step 4.

A new window will appear with user account settings, where you need to select the desired entry with the left mouse button and remove the marker from the line “ Require username and password».

Step 5.

At the final stage you will be asked to enter a password, which this moment installed on the insisted account. To finish, click on the “ OK».

How to remove the startup password from a Windows 7, 8, 10 computer?

To remove an account password in versions Windows 7, 8 And 10 you can resort to the same method as in the case of Windows XP, however, it will be easier to do this through the control panel. To do this you need to perform the following steps:

Step 1.

Turn on your computer and run " Control Panel».
At the top of the window with right side in the column " View" set the parameter " Small icons" and in the updated window find the section " user accounts».

Step 2.

A window with account settings will open in front of you, where you can set an avatar for them, set a password or change an existing one.
To delete an existing password, you need to click on the line “ Removing your password».

Step 3.

A tab will open on which you need to enter the currently set account password in the appropriate field and click on the button to confirm the action. Remove password».
Thus, after restarting the computer, the operating system will no longer require you to enter a password, and you will log in automatically.

How to remove a password from a computer if you forgot? Windows XP, 7, 8, 10

When setting a password for an account in the system Windows You are always additionally required to enter a hint in case you suddenly forget your password. If this happens, the first thing you should do is contact her for help by clicking on the corresponding icon when logging in.

If the hint did not help you in any way, then you will need to do the following manipulations with the computer:

Step 1.

The first thing you need to do is run Windows in safe mode. To do this, restart your computer and, almost immediately after the boot starts, press the " F8».
A list of operating system boot modes will appear on the monitor. Using the keyboard arrows, go to the line “ Safe mode" and press " Enter» to login.

Step 2.

After loading the operating system, a window with accounts will appear on the screen. Among them, a standard account should appear “ Administrator", which you need to enter.
A window will appear notifying you that the operating system is running in safe mode. Click the button OK" and wait until the OS loads completely.

Step 3.

Next, as in standard mode, through the menu “ Start» expand « Control Panel", go to the section " User accounts» and select the user whose password you want to reset.

Step 4.

In the account settings window, go to the " Changing your password" and then press the button " Change password", leaving all fields blank.

Step 5.

Close all windows correctly, restart your computer, and log in normally. Now, when choosing your account, you will be able to log in without asking for a password.

IMPORTANT: When starting safe mode monitor resolution automatically changes and color scheme operating system. To make sure that these changes did not occur as a result of a system failure, make sure that the text “ Safe mode».

VIDEO: How to reset a password in the Windows 7, 8, 10 operating system?

Removing the password when logging into Windows 7 is quite simple. This will require a minimum amount of time and knowledge. This kind of operation usually takes no more than a couple of minutes.

It can be done different ways: via a special console, command line, or by resetting key data from SAM. Each method has both its advantages and disadvantages.

Why set a password?

It often happens that some important and confidential data is stored on the PC, access to which should be limited. Microsoft Windows makes it possible to easily limit the circle of people who have access to files on your computer by installing a special key. Each person can have his own if there are several users.

An access code is also required to protect information on the PC to different owners from each other. For example, this is often necessary for parents so that curious children are not able to get acquainted with some information that they are not entitled to.

Removing the password through the “Run” console

One of the most simple way disabling the entry of an access key on the OS - using the “Run” item. Accessing it is quite simple - just click on the “Start” button. Most often, the item in question is present on the right side of the window that opens.

Entering a command

To disable the function in question, you must enter a specific command. It will open a special applet that allows you to do this.

The process of entering the command is as follows:

open the Start button menu;
click on the “Run” item;
In the field that opens, write “control userpassword2”.

After completing these operations, a window called “User Accounts” will open.

It contains two tabs:

"Users";
"Additionally".

You need to focus your attention on the first tab. Since this is where all account settings are made, including changing the login, access key and other attributes. In addition, if desired, you can easily add new accounts or delete old ones.

Disabling the password

To disable Password, just open the corresponding window (“accounts” -> “users”). In it, you need to uncheck the box called “Require username and...”. In this simple way you can disable the need to enter Password.

Confirming the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

in the window called “Accounts”, double-click on the desired line (admin, user or something else);
click “OK”.

A window will open containing three fields. Only the top one should be filled in; login is written there. The rest remain empty. After that, click on “OK” again. After performing these operations, when starting Microsoft Windows, there will be no need for Password. Which is quite convenient if only one person has physical access to the PC.

video: Password reset

Removing the password when starting Windows without programs

Also Password in the considered operating system can be unstuck without using the “Run” item, as well as various kinds third party applications. To do this, just use a special command line. In this way, you can avoid having to enter Password when you turn on the computer, as well as when it comes out of sleep mode.

Command line setup

In order to configure the command line, you need to use the Windows distribution disk. This way setting up and resetting the access code is suitable if it is forgotten and it is not possible to start the OS otherwise.

First of all, you need to install it through the BIOS to boot from a CD or other device containing the distribution. After this, you should reboot and start the installation.

After this, the following actions are performed:

CmdLine – enter cmd.exe;
SetupType – replace parameter 0 with 2;

select section 999 and click “Unload hive”;
extract the distribution package and reboot the PC.

Resetting your password and login

After loading the operating system, the user will immediately see the command line window. To reset the password, you must enter the following command: net user username

If for some reason User has forgotten the account name, then you can simply write net user without parameters. This will allow you to display all available items and select the one you need.

If the new Password is not intended to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: disk name:Windowssystem32net user user_name new-key.

It is also often necessary to create a new account without an access key.

To do this, you need to run the following commands in strict order:

These commands perform the following operations in strict order:

creating a new User;
adding it to working group Administrator;
removal from the Users group.

The reset method in question is quite complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There is a huge number of the most different ways resetting the login code. But all of them only change in various ways the information stored in special file called SAM. It is used by the OS to store data related to both User and Password. This abbreviation name stands for Security Account Manager.

The file in question does not have an extension, since it simply does not require one. It is a direct part of the registry, located in the directory systemrootsystem32config. There is also a copy of the file in question on disk disaster recovery, If this function for some reason it was not disabled earlier.

Editing this file to change the operating system login parameters is the most difficult way. To work with SAM you need specialized software from third party developers. All operations with SAM must be performed with the utmost care and precision.

How it works

The most popular application for changing data in the SAM file is active password changer. Before you start, you need to copy the application to some media or other HDD FAT32.

After performing this operation you must:

run the password file from the folder "BootableDiskCreator";
in the window that opens, select "Add USB...";
activate the button "Start".

After completing all the above steps, a bootable USB flash drive will be created.

The process of changing data using the application in question is as follows:

This method of working with accounts and their attributes is as secure as possible. Since it allows you to avoid editing the registry and other manual operations. This can sometimes be difficult for not very experienced users who started working with their PC relatively recently. The likelihood of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for PC use by individual accounts.

The disadvantages include the fact that some outdated models motherboards do not support launching from a USB drive. In such a situation, you have to look for some alternative options: a floppy disk, a CD, or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. From such difficult situation

Removing the password when logging into Windows 7 is quite simple. This will require a minimum amount of time and knowledge. This kind of operation usually takes no more than a couple of minutes.

There are many outputs; reinstalling the system is not always required. Moreover, any computer owner who has minimal skills in interacting with this type of equipment can cope with resetting the OS access code.

Why set a password?

Removing the password through the “Run” console

This can be done in various ways: through a special console, command line, or by resetting key data from SAM. Each method has both its advantages and disadvantages.