Good day, dear friends. Today we will talk about recovering information from an SD flash card. An SD card (Secure Digital Memory Card) is a removable storage device whose main tasks are storing data, transporting it and transferring it to another storage medium. This type of flash memory card can be found on various digital electronics. But most often, digital camera manufacturers use an SD card as the basis for removable memory in their devices.

SD card recovery program is an indispensable assistant in the fight against information loss. It is recommended to have it on hand in case of data problems. This method of file recovery is considered the most cost-effective method of regaining control of the data located on the SD flash card. Therefore, you should start resuscitating the card in this way. This section of the site presents best utilities recovering information from an SD flash drive. Of course, you can download them completely free of charge.

The size of this card is noticeably larger (32X24X1.5 mm) than that of micro cards SD. In addition, a distinctive feature of the SD card is the truncated upper right corner. Memory chips and a card controller are hidden inside the plastic case. When visually inspecting the Secure Digital (SD) card, you will notice a miniature switch on the left side. This is a “protection” mode switch, when activated, nothing can be done with the memory card. For example, it will not be possible to write new data to it or delete files already on the flash card.

Data problems happen with all storage media, and the SD card is no exception to the rule. Let's find out after what events most often the loss of files on a flash card occurs.

1) The most common case is by accident deleted by user information on a flash drive.

2) SD card formatted on a computer or other digital device.

3) Careless disconnection of the card can cause a failure in the logical structure. This happens if the user pulls out the SD card, the work of which has not yet ended. When using a flash drive in a digital device or card reader, it is strongly recommended to remove the card only when no operations are being performed on it.

4) The last photo taken on a camera with a full SD card may cause it to no longer be recognized by the computer.

5) Due to an electrical failure or problems with the firmware, the controller located inside the flash drive may fail.

6) Mechanical damage to the card.

SD recovery programs are used only when the card has no mechanical damage to the case and it is detected by the PC operating system. Most often, access to photos and videos located on the camera’s flash drive is lost. If you have no visible damage on the card additional memory, then feel free to download the product you are interested in onto your computer and immediately begin software treatment of lost information.

Happy data recovery!

If you liked the program, share the link with your friends.

PROGRAMS

After a virus attack, power outage or formatting operating system stopped detecting the flash drive... Is this a familiar situation? What to do? Throw the device in the trash and run to the store for a new one? There's no need to rush. There are software solutions to restore non-working flash drives. Most of these programs do a good job of this task. This list contains those that most effectively help solve the problem.

A small utility with a set of functions for restoring inoperative flash drives. It has a simple and intuitive interface, which even without Russian language support makes it one of the the best tools for working with flash drives. HP USB Disk Storage Format Tool scans flash drives, corrects errors and formats them in different file systems.

HDD Low Level Format Tool

Another small one, but powerful program for flash drive repair. Using low-level formatting, it can bring inoperative drives back to life. Provides complete information about the drive and S.M.A.R.T data for the HDD. Formats both quickly, with overwriting only the MBR, and deeply, with the deletion of all data. Unlike the previous representative, it can work not only with flash drives, but also with hard drives.

SD Formatter

Sd Formatter is a memory card recovery program that can recover SDHC, microSD and SDXC drives. In addition, it can treat memory cards after unsuccessful formatting, as well as completely erase information by multiple rewrites random data.

Flash Doctor

Flash Doctor is a program for recovering a transcendent flash drive. Scans disks for errors and restores them using low-level formatting. Works not only with flash drives, but also with hard drives. Distinctive feature Flash Doctor is a disk imaging feature. The resulting images, in turn, can be written to flash drives.

EzRecover

The most simple program for Kingston flash drive recovery is on our list. But its simplicity is only external. In fact, EzRecover is able to look at flash drives that are not detected in the system and recover them. EzRecover brings back to life flash drives with the “Security Device” label and (or) zero capacity. Despite all its apparent inconspicuousness, it copes with its tasks perfectly.

Here is a list of programs for flash drive recovery. Each has its own characteristics, but they all do their job perfectly. It's difficult to recommend any specific one. Flash Doctor will not always cope where EzRecover cannot, so you need to have a set of similar programs in your arsenal.

Summarizing the above, let's briefly describe the solutions, define the circle of users for whom they are intended and talk a little about the sequence of actions.

Before you start the procedure for restoring the media's functionality by permanently erasing it, do not forget to extract important data using Hetman Partition Recovery. The program copes with information recovery better than narrow-profile analogues. It is compatible with any drive, not just removable ones, so it helps in many situations.

JetFlash Recovery Tool And Transcend RecoveRx- high-quality software from major manufacturers of USB, Secure Digital and other media:

The first utility can quickly bring flash drives back to life after system errors (if you want to save data before resetting, it is better to use jetflash online recovery - this advanced tool works online).
The second, in addition to formatting, can restore files different types(video, audio, documents), which will be appreciated by owners of digital cameras and smartphones that have suffered a software failure!

And don’t think that to format a Kingston flash drive, Silicon Power, Adata, etc. There are no branded products - just universal ones work better.

The following group of utilities are easy-to-use programs for those who do not want to delve into the intricacies of operation and principles of card or flash drive recovery:

EzRecover with its “one-button” interface, it is the “lightest” of its analogues. If the utility detects the drive, all data on the memory card will be destroyed and the failures will be corrected. You can rejoice in USB recovery!
Works almost the same SD Formatter. But here you can customize the formatting method, block size, file system on the way out.
F-Recovery SD will delight you with a powerful search algorithm deleted photo or other files. Register the mask and start scanning. Like SD Formatter, the application is “tailored” to work with memory cards. In terms of quality of work, the utility will lose only Hetman Partition Recovery.

D-Soft Flash Doctor, Flash Memory Toolkit and HDD Low Level Format Tool- diverse programs for administrators and advanced users. Each of them has its own “trick”.

D-Soft Flash Doctor implements saving data into an image before scanning and cleaning.
Trump HDD Low Level Format Tool- working with hard drives, low level formatting and in-depth analysis of the drive’s condition. The program is good except for one thing - it does not create a partition with the file system after wiping the disk, leaving an unallocated area.
Flash Memory Toolkit is a “harvester”, among the advantages of which is the ability to create a copy of a partition, erase it or overwrite it completely, scan for errors and bad sectors, measure the read/write speed in different modes. It's hard to think of a better one.

Also receives rave reviews from users HP USB Disk Storage Format Tool. We agree, the program works well, supports any media up to the system HDD, but in “neglected” cases it rarely gives positive result. We recommend using it for complete cleaning devices before sale or transfer to third parties.

Not included in our review USB program Flash Drive Recovery, despite the euphony of the name, does not please with functionality. The application works worse than its analogues, and costs as much as $45. There is also no normal demo license.

Having problems on your Android phone or any other with a memory card? Can't read data from it or your Android phone/tablet doesn't detect it?

You can repair a damaged micro SD card if it is damaged using a computer, check it for errors, or completely reformat it.

In general, the fact that the SD card is not readable is not something unusual. If you have a lot of data stored on it and you use it extensively on your phone, there is always a chance that you might have trouble reading the content.

But this does not mean that the card should be thrown away immediately. There is always a chance to restore the SD card.

Sometimes the solution may be to check the file system for errors in saved files, repair bad sectors, format the card, or complete removal section (map structure) and its re-creation. Below we will look at all these solutions.

How can I restore the functionality of an external SD card?

To fix a damaged SD card you will need:

• computer or laptop running Windows;
• any way to connect an SD card directly to a computer.

You can connect it to your computer using an adapter - if not, you can buy a USB card reader.

Method one - repairing a damaged file system CHKDSK

If your device says sd card is damaged, here's what you can do. The first and easiest way is to use the Windows recovery tool. system disk, that is, CHDSK.

This tool is from Microsoft and is only available on Windows computers. CHKDSK does this without deleting any files, so you won't lose any card data.

First, connect the SD card directly to your computer or laptop and launch “My Computer” or “This PC” (Windows 8 and later).

In the list of drives, find the included SD card and note which drive letter it was assigned to. For the purposes of this guide, let's assume the card has been assigned the letter "D".

Press combination Windows keys+ R to bring up window Windows startup. In the run window enter the following command to enable command line:CMD.

A new command prompt window will appear. Now you must enter the appropriate command that will scan the memory card and fix the errors on it. The command looks like this: chkdsk D: /f

Of course, instead of "D:", write your drive letter (don't forget the colon). Press the "Enter" button to start scanning.

After scanning, you can check your memory drive and see if everything is working.

Method two - formatting a damaged SD card

The second way to fix a damaged SD card is to format it by deleting all data. This option can help if CHKDSK failed to check and you are still having problems (for example, errors reading individual files).

Of course, you will lose all your data, but chances are that formatting will fix the card.

To do this, connect the drive to your computer, and then call “My Computer” or “This Computer.” In the list of drives, find the connected SD card and right-click it.

Select "Format" in context menu. A new format window will appear for the specified drive (SD card in this case).

Click the "Default Allocation Size" button and make sure "FAT32" is selected as the file system.

You can format with the “Quick Format” option selected, but to get more accurate results I recommend that you uncheck this box - formatting will take much longer, but is done more carefully, which can help solve problems with the card.

After formatting, reinsert the card into your smartphone, tablet, digital camera, or whatever device you are using and make sure the card is working properly.

Method three - completely delete all partitions and re-create them again

An SD card is no different from a regular disk - it can have one or more partitions. By default there is always only one section.

You can format the card in such a way as to completely remove the partition and leave it unallocated.

This is called low-level formatting. Please note that this will also permanently delete all data on the memory card.

After formatting you can create new section. This often helps when the memory card appears as "RAW" after connecting and does not show any partitions that can be accessed.

For this formatting, you can use a program called “HDD Low Level Format Tool”. You can download it below.

Connect the drive to your computer, and then run the Hard Drive Low Level Tool.

You will see a list of all your drives on your computer, including the connected one external storage. Find your SD card in the list and select it.

Make sure you choose correctly. Once selected, click Continue and go to the Format this device tab.

The card will be completely formatted and all partitions will be deleted. This will now be a clean, undistributed surface.

That's not all - the card is in such a state that it will be useless. Now go to the Start menu and find the Windows Administrative Tools folder and select Computer Management.

A new window will appear. In it, select “Disk Management”. A new window will appear displaying all drives, both internal and external, connected via USB.

Find your drive, the surface of which is displayed in black. Right-click on the black unallocated area and select New Simple Volume.

You will see a wizard that will guide you step by step through the process of creating a partition. You don't need to change anything, just click Next. Pay attention to the File System field and make sure that FAT32 is selected instead of NTFS.

Confirm the creation of the new partition. Your micro SD card will now appear in the My Computer window with a drive letter automatically assigned. You can disconnect it from your computer and connect it to your phone or tablet. Good luck.

Developer:
http://hddguru.com/

OS:
Windows

Interface:
English

Card recovery question MicroSD memory usually arises when there are various kinds of problems with displaying it on a smartphone, video camera or camera. Another important factor is the need to copy data from this medium, and then bring it back to life.

Thus, it becomes clear to us that the device in which it is used will not achieve the goal. Here you will have to use a card reader or at least a USB adapter. It is better to use an external card reader, if you have one, since the built-in one may not recognize a damaged MicroSD card well.

Before performing actions, you need to clearly establish a goal; you need the card itself or data from it. If both are options, then you should start by saving the information from the card. To copy from a flash drive broken or erased files You will need a program to recover a MicroSD memory card, CardRecover. You can also use others, such as RS File Recovery or Auslogics Recovery.

How to recover MicroSD using CardRecovery?

The method allows you to recover files from damaged media, even if the information has been deleted. An important condition for recovery deleted files is to immediately stop using it until the end of the procedure.

CardRecovery is capable of recovering even multimedia files: video formats, audio and images, as well as documents and other important types of data.

The advantage of the program is also that it is multiplatform; it works in all Windows versions. Weighing only 829Kb, it can be downloaded even with the weakest network connection, which is a big advantage.

In order to restore MicroSD memory using the CardRecovery utility, you should:

• Download the program from the website https://www.cardrecovery.com/download.asp;
• After installation and launch, you will see a simple utility welcome window, where you should click “Next”;

• Step 1 – consists of specifying the path to the media, the file formats of interest and the directory for copying them;

• Step 2 – requires you to set a value for the amount of information recovered from the media. After the search, you will be informed about the number of files found;

• Step 3 – involves selecting from the found files those that can be restored. There is a preview for images, which can be used by selecting each element or all of them at the same time. Then click on “Next”;

• Once the recovery is complete, there will be a button that serves as a link to go to the folder with the recovered information.

With this, we figured out how to restore a MicroSD memory card, or rather information from it. You can check if it is working now, perhaps the card started working along the way, otherwise you need to perform the recovery process itself.

Formatting a MicroSD card

Now you should check whether it is possible to restore the memory card using standard Windows functions. There is simply no point in downloading formatting programs, since they perform the same function, you just need to deal with each one separately.

The method works for memory cards that are displayed in Windows and with which it can work. After formatting, proper operation of the device should be restored. You need:

1.Connect the flash drive to the computer using a card reader or USB adapter;

2.Go to the “My Computer” section and check that the map is displayed;

3.Right-click and select Format. In Windows, there are several ways to perform formatting: quick and full. You should try them one by one or run the full one right away, the files will be erased, if you need them, use the previous method. You may have to format several times with a choice of different file systems FAT32, NTFS or exFAT, some recommend the latter, but it is supported by more modern smartphones;

4.For most cases this is enough, but if it is not, then you should perform another error checking procedure. To do this:

• RMB on the device and select “Properties”;
• Go to the “Service” tab;
• In the “Check Disk” column, click the “Run Check” button.

After completing this procedure, the question of how to restore a MicroSD card should no longer open.

If standard methods is not enough for recovery, then you can use Transcend Autoformat or SDFormatter. The fact is that some cameras or video cameras have an excellent file system. These utilities allow you to choose the one most suitable for your situation, although you should not choose little-known ones either.

So, we figured out how to restore a memory card to different levels, from retrieving information from the media to rehabilitation itself MicroSD cards. Unfortunately, if nothing helps you and your card is not even displayed on your computer, smartphone, or other gadget, then your only option is to use the service center.

If you have any questions about the topic " MicroSD Recovery", then you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Bluetooth